linux-stable.git/drivers/tty, branch v6.12.4 Linux kernel stable tree serial: amba-pl011: fix build regression 2024-12-05T13:02:54+00:00 Arnd Bergmann arnd@arndb.de 2024-11-15T10:59:54+00:00 1fae444a616620b9bb694f6bed8abc065a7023a0 commit b5a23a60e8ab5711f4952912424347bf3864ce8d upstream. When CONFIG_DMA_ENGINE is disabled, the driver now fails to build: drivers/tty/serial/amba-pl011.c: In function 'pl011_unthrottle_rx': drivers/tty/serial/amba-pl011.c:1822:16: error: 'struct uart_amba_port' has no member named 'using_rx_dma' 1822 | if (uap->using_rx_dma) { | ^~ drivers/tty/serial/amba-pl011.c:1823:20: error: 'struct uart_amba_port' has no member named 'dmacr' 1823 | uap->dmacr |= UART011_RXDMAE; | ^~ drivers/tty/serial/amba-pl011.c:1824:32: error: 'struct uart_amba_port' has no member named 'dmacr' 1824 | pl011_write(uap->dmacr, uap, REG_DMACR); | ^~ Add the missing #ifdef check around these field accesses, matching what other parts of this driver do. Fixes: 2bcacc1c87ac ("serial: amba-pl011: Fix RX stall when DMA is used") Cc: stable <stable@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411140617.nkjeHhsK-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241115110021.744332-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b5a23a60e8ab5711f4952912424347bf3864ce8d upstream.

When CONFIG_DMA_ENGINE is disabled, the driver now fails to build:

drivers/tty/serial/amba-pl011.c: In function 'pl011_unthrottle_rx':
drivers/tty/serial/amba-pl011.c:1822:16: error: 'struct uart_amba_port' has no member named 'using_rx_dma'
 1822 |         if (uap->using_rx_dma) {
      |                ^~
drivers/tty/serial/amba-pl011.c:1823:20: error: 'struct uart_amba_port' has no member named 'dmacr'
 1823 |                 uap->dmacr |= UART011_RXDMAE;
      |                    ^~
drivers/tty/serial/amba-pl011.c:1824:32: error: 'struct uart_amba_port' has no member named 'dmacr'
 1824 |                 pl011_write(uap->dmacr, uap, REG_DMACR);
      |                                ^~

Add the missing #ifdef check around these field accesses, matching
what other parts of this driver do.

Fixes: 2bcacc1c87ac ("serial: amba-pl011: Fix RX stall when DMA is used")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411140617.nkjeHhsK-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241115110021.744332-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: amba-pl011: Fix RX stall when DMA is used 2024-12-05T13:02:54+00:00 Kartik Rajput kkartik@nvidia.com 2024-11-13T09:26:29+00:00 e881c8f0a7d591b9d1ed562c62e3f8182463c6ca commit 2bcacc1c87acf9a8ebc17de18cb2b3cfeca547cf upstream. Function pl011_throttle_rx() calls pl011_stop_rx() to disable RX, which also disables the RX DMA by clearing the RXDMAE bit of the DMACR register. However, to properly unthrottle RX when DMA is used, the function pl011_unthrottle_rx() is expected to set the RXDMAE bit of the DMACR register, which it currently lacks. This causes RX to stall after the throttle API is called. Set RXDMAE bit in the DMACR register while unthrottling RX if RX DMA is used. Fixes: 211565b10099 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle") Cc: stable@vger.kernel.org Signed-off-by: Kartik Rajput <kkartik@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241113092629.60226-1-kkartik@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2bcacc1c87acf9a8ebc17de18cb2b3cfeca547cf upstream.

Function pl011_throttle_rx() calls pl011_stop_rx() to disable RX, which
also disables the RX DMA by clearing the RXDMAE bit of the DMACR
register. However, to properly unthrottle RX when DMA is used, the
function pl011_unthrottle_rx() is expected to set the RXDMAE bit of
the DMACR register, which it currently lacks. This causes RX to stall
after the throttle API is called.

Set RXDMAE bit in the DMACR register while unthrottling RX if RX DMA is
used.

Fixes: 211565b10099 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241113092629.60226-1-kkartik@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: omap: Move pm_runtime_get_sync 2024-12-05T13:02:54+00:00 Bin Liu b-liu@ti.com 2024-10-31T17:23:15+00:00 ac0e4f5f7690088c9ec5e7d822cd0dda12a722a1 commit bcc7ba668818dcadd2f1db66b39ed860a63ecf97 upstream. Currently in omap_8250_shutdown, the dma->rx_running flag is set to zero in omap_8250_rx_dma_flush. Next pm_runtime_get_sync is called, which is a runtime resume call stack which can re-set the flag. When the call omap_8250_shutdown returns, the flag is expected to be UN-SET, but this is not the case. This is causing issues the next time UART is re-opened and omap_8250_rx_dma is called. Fix by moving pm_runtime_get_sync before the omap_8250_rx_dma_flush. cc: stable@vger.kernel.org Fixes: 0e31c8d173ab ("tty: serial: 8250_omap: add custom DMA-RX callback") Signed-off-by: Bin Liu <b-liu@ti.com> [Judith: Add commit message] Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20241031172315.453750-1-jm@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bcc7ba668818dcadd2f1db66b39ed860a63ecf97 upstream.

Currently in omap_8250_shutdown, the dma->rx_running flag is
set to zero in omap_8250_rx_dma_flush. Next pm_runtime_get_sync
is called, which is a runtime resume call stack which can
re-set the flag. When the call omap_8250_shutdown returns, the
flag is expected to be UN-SET, but this is not the case. This
is causing issues the next time UART is re-opened and
omap_8250_rx_dma is called. Fix by moving pm_runtime_get_sync
before the omap_8250_rx_dma_flush.

cc: stable@vger.kernel.org
Fixes: 0e31c8d173ab ("tty: serial: 8250_omap: add custom DMA-RX callback")
Signed-off-by: Bin Liu <b-liu@ti.com>
[Judith: Add commit message]
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20241031172315.453750-1-jm@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_fintek: Add support for F81216E 2024-12-05T13:02:53+00:00 Filip Brozovic fbrozovic@gmail.com 2024-11-10T11:17:00+00:00 07524c95ab13defccebe03b29d734fcd3304891c commit 166105c9030a30ba08574a9998afc7b60bc72dd7 upstream. The F81216E is a LPC/eSPI to 4 UART Super I/O and is mostly compatible with the F81216H, but does not support RS-485 auto-direction delays on any port. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20241110111703.15494-1-fbrozovic@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 166105c9030a30ba08574a9998afc7b60bc72dd7 upstream.

The F81216E is a LPC/eSPI to 4 UART Super I/O and is mostly compatible with
the F81216H, but does not support RS-485 auto-direction delays on any port.

Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20241110111703.15494-1-fbrozovic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" 2024-12-05T13:02:50+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2024-11-30T15:55:56+00:00 0a9fd032f934b2fa5dd651e9c84482e79a8eb670 commit 718632467d88e98816fa01ab12681ef1c2aa56f8 upstream. This reverts commit 3791ea69a4858b81e0277f695ca40f5aae40f312. It was reported to cause boot-time issues, so revert it for now. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 3791ea69a485 ("serial: sh-sci: Clean sci_ports[0] after at earlycon exit") Cc: stable <stable@kernel.org> Cc: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 718632467d88e98816fa01ab12681ef1c2aa56f8 upstream.

This reverts commit 3791ea69a4858b81e0277f695ca40f5aae40f312.

It was reported to cause boot-time issues, so revert it for now.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 3791ea69a485 ("serial: sh-sci: Clean sci_ports[0] after at earlycon exit")
Cc: stable <stable@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: sh-sci: Clean sci_ports[0] after at earlycon exit 2024-12-05T13:02:50+00:00 Claudiu Beznea claudiu.beznea.uj@bp.renesas.com 2024-11-06T12:01:12+00:00 2fa5da1f91350262efe7e2a21673a9fc93bf308d commit 3791ea69a4858b81e0277f695ca40f5aae40f312 upstream. The early_console_setup() function initializes the sci_ports[0].port with an object of type struct uart_port obtained from the object of type struct earlycon_device received as argument by the early_console_setup(). It may happen that later, when the rest of the serial ports are probed, the serial port that was used as earlycon (e.g., port A) to be mapped to a different position in sci_ports[] and the slot 0 to be used by a different serial port (e.g., port B), as follows: sci_ports[0] = port A sci_ports[X] = port B In this case, the new port mapped at index zero will have associated data that was used for earlycon. In case this happens, after Linux boot, any access to the serial port that maps on sci_ports[0] (port A) will block the serial port that was used as earlycon (port B). To fix this, add early_console_exit() that clean the sci_ports[0] at earlycon exit time. Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable@vger.kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20241106120118.1719888-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3791ea69a4858b81e0277f695ca40f5aae40f312 upstream.

The early_console_setup() function initializes the sci_ports[0].port with
an object of type struct uart_port obtained from the object of type
struct earlycon_device received as argument by the early_console_setup().

It may happen that later, when the rest of the serial ports are probed,
the serial port that was used as earlycon (e.g., port A) to be mapped to a
different position in sci_ports[] and the slot 0 to be used by a different
serial port (e.g., port B), as follows:

sci_ports[0] = port A
sci_ports[X] = port B

In this case, the new port mapped at index zero will have associated data
that was used for earlycon.

In case this happens, after Linux boot, any access to the serial port that
maps on sci_ports[0] (port A) will block the serial port that was used as
earlycon (port B).

To fix this, add early_console_exit() that clean the sci_ports[0] at
earlycon exit time.

Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241106120118.1719888-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler 2024-12-05T13:02:46+00:00 Nicolas Bouchinet nicolas.bouchinet@ssi.gouv.fr 2024-11-12T13:13:31+00:00 53bbfa689670d00ce5fa12b90fcde9526bc649ca commit 635a9fca54f4f4148be1ae1c7c6bd37af80f5773 upstream. Commit 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of ldiscs") introduces the tty_ldisc_autoload sysctl with the wrong proc_handler. .extra1 and .extra2 parameters are set to avoid other values thant SYSCTL_ZERO or SYSCTL_ONE to be set but proc_dointvec do not uses them. This commit fixes this by using proc_dointvec_minmax instead of proc_dointvec. Fixes: 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of ldiscs") Cc: stable <stable@kernel.org> Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr> Reviewed-by: Lin Feng <linf@wangsu.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20241112131357.49582-4-nicolas.bouchinet@clip-os.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 635a9fca54f4f4148be1ae1c7c6bd37af80f5773 upstream.

Commit 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of
ldiscs") introduces the tty_ldisc_autoload sysctl with the wrong
proc_handler. .extra1 and .extra2 parameters are set to avoid other values
thant SYSCTL_ZERO or SYSCTL_ONE to be set but proc_dointvec do not uses
them.

This commit fixes this by using proc_dointvec_minmax instead of
proc_dointvec.

Fixes: 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of ldiscs")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
Reviewed-by: Lin Feng <linf@wangsu.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20241112131357.49582-4-nicolas.bouchinet@clip-os.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: qcom-geni: rename suspend functions 2024-10-11T06:39:24+00:00 Johan Hovold johan+linaro@kernel.org 2024-10-09T14:51:10+00:00 be847a3a8d4ec4bf270c2455376d11f2de61bfb3 Drop the unnecessary "_sys" infix from the suspend PM ops. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20241009145110.16847-10-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Drop the unnecessary "_sys" infix from the suspend PM ops.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-10-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: qcom-geni: drop unused receive parameter 2024-10-11T06:39:23+00:00 Johan Hovold johan+linaro@kernel.org 2024-10-09T14:51:09+00:00 4cf4b344c1e1a0682d76f3ec9da90a714e986e90 Serial drivers should not be dropping characters themselves, but at least drop the unused 'drop' parameter from the receive handler for now. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241009145110.16847-9-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Serial drivers should not be dropping characters themselves, but at
least drop the unused 'drop' parameter from the receive handler for now.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-9-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: qcom-geni: drop flip buffer WARN() 2024-10-11T06:39:23+00:00 Johan Hovold johan+linaro@kernel.org 2024-10-09T14:51:08+00:00 8173d74ac12bf231fa3a22ae0ad9d56c2abc4618 Drop the unnecessary WARN() in case the TTY buffers are ever full in favour of a rate limited dev_err() which doesn't kill the machine when panic_on_warn is set. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241009145110.16847-8-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Drop the unnecessary WARN() in case the TTY buffers are ever full in
favour of a rate limited dev_err() which doesn't kill the machine when
panic_on_warn is set.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>