linux-stable.git/drivers/tty, branch v6.1.83 Linux kernel stable tree serial: 8250_exar: Don't remove GPIO device on suspend 2024-03-26T22:20:58+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2024-02-19T15:04:57+00:00 d2b48ecc760ae540b298bcf88a050c8bceef9662 [ Upstream commit 73b5a5c00be39e23b194bad10e1ea8bb73eee176 ] It seems a copy&paste mistake that suspend callback removes the GPIO device. There is no counterpart of this action, means once suspended there is no more GPIO device available untile full unbind-bind cycle is performed. Remove suspicious GPIO device removal in suspend. Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240219150627.2101198-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 73b5a5c00be39e23b194bad10e1ea8bb73eee176 ]

It seems a copy&paste mistake that suspend callback removes the GPIO
device. There is no counterpart of this action, means once suspended
there is no more GPIO device available untile full unbind-bind cycle
is performed. Remove suspicious GPIO device removal in suspend.

Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT 2024-03-26T22:20:57+00:00 Tudor Ambarus tudor.ambarus@linaro.org 2024-01-19T10:45:08+00:00 ad7362db2fd718f2c9d12eefa5cb50a0376fc328 [ Upstream commit 314c2b399288f0058a8c5b6683292cbde5f1531b ] The core expects for tx_empty() either TIOCSER_TEMT when the tx is empty or 0 otherwise. s3c24xx_serial_txempty_nofifo() might return 0x4, and at least uart_get_lsr_info() tries to clear exactly TIOCSER_TEMT (BIT(1)). Fix tx_empty() to return TIOCSER_TEMT. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20240119104526.1221243-2-tudor.ambarus@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 314c2b399288f0058a8c5b6683292cbde5f1531b ]

The core expects for tx_empty() either TIOCSER_TEMT when the tx is
empty or 0 otherwise. s3c24xx_serial_txempty_nofifo() might return
0x4, and at least uart_get_lsr_info() tries to clear exactly
TIOCSER_TEMT (BIT(1)). Fix tx_empty() to return TIOCSER_TEMT.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-2-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: max310x: fix syntax error in IRQ error message 2024-03-26T22:20:57+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2024-01-18T15:22:01+00:00 e955764b41676ebaba44b478f4e7e2afb43a0140 [ Upstream commit 8ede8c6f474255b2213cccd7997b993272a8e2f9 ] Replace g with q. Helpful when grepping thru source code or logs for "request" keyword. Fixes: f65444187a66 ("serial: New serial driver MAX310X") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240118152213.2644269-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8ede8c6f474255b2213cccd7997b993272a8e2f9 ]

Replace g with q.

Helpful when grepping thru source code or logs for
"request" keyword.

Fixes: f65444187a66 ("serial: New serial driver MAX310X")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240118152213.2644269-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: vt: fix 20 vs 0x20 typo in EScsiignore 2024-03-26T22:20:57+00:00 Jiri Slaby (SUSE) jirislaby@kernel.org 2024-01-22T11:03:17+00:00 52af9897e787bdaffa839f5d6fb535448a3c559a [ Upstream commit 0e6a92f67c8a94707f7bb27ac29e2bdf3e7c167d ] The if (c >= 20 && c <= 0x3f) test added in commit 7a99565f8732 is wrong. 20 is DC4 in ascii and it makes no sense to consider that as the bottom limit. Instead, it should be 0x20 as in the other test in the commit above. This is supposed to NOT change anything as we handle interesting 20-0x20 asciis far before this if. So for sakeness, change to 0x20 (which is SPACE). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Fixes: 7a99565f8732 ("vt: ignore csi sequences with intermediate characters.") Cc: Martin Hostettler <textshell@uchuujin.de> Link: https://lore.kernel.org/all/ZaP45QY2WEsDqoxg@neutronstar.dyndns.org/ Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0e6a92f67c8a94707f7bb27ac29e2bdf3e7c167d ]

The if (c >= 20 && c <= 0x3f) test added in commit 7a99565f8732 is
wrong.  20 is DC4 in ascii and it makes no sense to consider that as the
bottom limit. Instead, it should be 0x20 as in the other test in
the commit above. This is supposed to NOT change anything as we handle
interesting 20-0x20 asciis far before this if.

So for sakeness, change to 0x20 (which is SPACE).

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 7a99565f8732 ("vt: ignore csi sequences with intermediate characters.")
Cc: Martin Hostettler <textshell@uchuujin.de>
Link: https://lore.kernel.org/all/ZaP45QY2WEsDqoxg@neutronstar.dyndns.org/
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: amba-pl011: Fix DMA transmission in RS485 mode 2024-03-01T12:26:33+00:00 Lino Sanfilippo l.sanfilippo@kunbus.com 2024-02-16T22:47:08+00:00 d4c7e4b1b0249598d2093d09be5a286f81fc4a36 commit 3b69e32e151bc4a4e3c785cbdb1f918d5ee337ed upstream. When DMA is used in RS485 mode make sure that the UARTs tx section is enabled before the DMA buffers are queued for transmission. Cc: stable@vger.kernel.org Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240216224709.9928-2-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3b69e32e151bc4a4e3c785cbdb1f918d5ee337ed upstream.

When DMA is used in RS485 mode make sure that the UARTs tx section is
enabled before the DMA buffers are queued for transmission.

Cc: stable@vger.kernel.org
Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240216224709.9928-2-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: max310x: prevent infinite while() loop in port startup 2024-02-23T08:12:42+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2024-01-16T21:30:01+00:00 5e2f407646faa2aa45c853d66a07cf4c8afdb59c commit b35f8dbbce818b02c730dc85133dc7754266e084 upstream. If there is a problem after resetting a port, the do/while() loop that checks the default value of DIVLSB register may run forever and spam the I2C bus. Add a delay before each read of DIVLSB, and a maximum number of tries to prevent that situation from happening. Also fail probe if port reset is unsuccessful. Fixes: 10d8b34a4217 ("serial: max310x: Driver rework") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b35f8dbbce818b02c730dc85133dc7754266e084 upstream.

If there is a problem after resetting a port, the do/while() loop that
checks the default value of DIVLSB register may run forever and spam the
I2C bus.

Add a delay before each read of DIVLSB, and a maximum number of tries to
prevent that situation from happening.

Also fail probe if port reset is unsuccessful.

Fixes: 10d8b34a4217 ("serial: max310x: Driver rework")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: max310x: fail probe if clock crystal is unstable 2024-02-23T08:12:42+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2024-01-16T21:30:00+00:00 0046dd2e9ff6d5f12a273046880cad39313bfcf4 commit 8afa6c6decea37e7cb473d2c60473f37f46cea35 upstream. A stable clock is really required in order to use this UART, so log an error message and bail out if the chip reports that the clock is not stable. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://www.spinics.net/lists/linux-serial/msg35773.html Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8afa6c6decea37e7cb473d2c60473f37f46cea35 upstream.

A stable clock is really required in order to use this UART, so log an
error message and bail out if the chip reports that the clock is not
stable.

Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://www.spinics.net/lists/linux-serial/msg35773.html
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: max310x: improve crystal stable clock detection 2024-02-23T08:12:42+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2024-01-16T21:29:59+00:00 7971a029eb23976016d7a9cd94f54e0c35aa26fb commit 93cd256ab224c2519e7c4e5f58bb4f1ac2bf0965 upstream. Some people are seeing a warning similar to this when using a crystal: max310x 11-006c: clock is not stable yet The datasheet doesn't mention the maximum time to wait for the clock to be stable when using a crystal, and it seems that the 10ms delay in the driver is not always sufficient. Jan Kundrát reported that it took three tries (each separated by 10ms) to get a stable clock. Modify behavior to check stable clock ready bit multiple times (20), and waiting 10ms between each try. Note: the first draft of the driver originally used a 50ms delay, without checking the clock stable bit. Then a loop with 1000 retries was implemented, each time reading the clock stable bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://www.spinics.net/lists/linux-serial/msg35773.html Link: https://lore.kernel.org/all/20240110174015.6f20195fde08e5c9e64e5675@hugovil.com/raw Link: https://github.com/boundarydevices/linux/commit/e5dfe3e4a751392515d78051973190301a37ca9a Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 93cd256ab224c2519e7c4e5f58bb4f1ac2bf0965 upstream.

Some people are seeing a warning similar to this when using a crystal:

    max310x 11-006c: clock is not stable yet

The datasheet doesn't mention the maximum time to wait for the clock to be
stable when using a crystal, and it seems that the 10ms delay in the driver
is not always sufficient.

Jan Kundrát reported that it took three tries (each separated by 10ms) to
get a stable clock.

Modify behavior to check stable clock ready bit multiple times (20), and
waiting 10ms between each try.

Note: the first draft of the driver originally used a 50ms delay, without
checking the clock stable bit.
Then a loop with 1000 retries was implemented, each time reading the clock
stable bit.

Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://www.spinics.net/lists/linux-serial/msg35773.html
Link: https://lore.kernel.org/all/20240110174015.6f20195fde08e5c9e64e5675@hugovil.com/raw
Link: https://github.com/boundarydevices/linux/commit/e5dfe3e4a751392515d78051973190301a37ca9a
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: max310x: set default value when reading clock ready bit 2024-02-23T08:12:42+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2024-01-16T21:29:58+00:00 5d89c48337c78a4cbe15ae0d6aa7ca043dae884e commit 0419373333c2f2024966d36261fd82a453281e80 upstream. If regmap_read() returns a non-zero value, the 'val' variable can be left uninitialized. Clear it before calling regmap_read() to make sure we properly detect the clock ready bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0419373333c2f2024966d36261fd82a453281e80 upstream.

If regmap_read() returns a non-zero value, the 'val' variable can be left
uninitialized.

Clear it before calling regmap_read() to make sure we properly detect
the clock ready bit.

Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE 2024-02-05T20:12:58+00:00 Adrian Reber areber@redhat.com 2023-12-08T14:36:56+00:00 c13bcbdb8415e87f2ddffee1bdf98f45eb55ffad [ Upstream commit e0f25b8992345aa5f113da2815f5add98738c611 ] The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root users to checkpoint and restore processes as non-root with CRIU. This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option '--shell-job' as non-root. CRIU's man-page describes the '--shell-job' option like this: Allow one to dump shell jobs. This implies the restored task will inherit session and process group ID from the criu itself. This option also allows to migrate a single external tty connection, to migrate applications like top. TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE. With this change it is possible to checkpoint and restore processes which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is set. Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Adrian Reber <areber@redhat.com> Acked-by: Andrei Vagin <avagin@gmail.com> Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e0f25b8992345aa5f113da2815f5add98738c611 ]

The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root
users to checkpoint and restore processes as non-root with CRIU.

This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option
'--shell-job' as non-root. CRIU's man-page describes the '--shell-job'
option like this:

  Allow one to dump shell jobs. This implies the restored task will
  inherit session and process group ID from the criu itself. This option
  also allows to migrate a single external tty connection, to migrate
  applications like top.

TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and
this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE.

With this change it is possible to checkpoint and restore processes
which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is
set.

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Adrian Reber <areber@redhat.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>