linux-stable.git/drivers/tty, branch v5.4.78

tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028A

2020-11-10T11:37:33+00:00

commit c97f2a6fb3dfbfbbc88edc8ea62ef2b944e18849 upstream.

Prior to the commit that this one fixes, the FIFO size was derived from
the read-only register LPUARTx_FIFO[TXFIFOSIZE] using the following
formula:

TX FIFO size = 2 ^ (LPUARTx_FIFO[TXFIFOSIZE] - 1)

The documentation for LS1021A is a mess. Under chapter 26.1.3 LS1021A
LPUART module special consideration, it mentions TXFIFO_SZ and RXFIFO_SZ
being equal to 4, and in the register description for LPUARTx_FIFO, it
shows the out-of-reset value of TXFIFOSIZE and RXFIFOSIZE fields as "011",
even though these registers read as "101" in reality.

And when LPUART on LS1021A was working, the "101" value did correspond
to "16 datawords", by applying the formula above, even though the
documentation is wrong again (!!!!) and says that "101" means 64 datawords
(hint: it doesn't).

So the "new" formula created by commit f77ebb241ce0 has all the premises
of being wrong for LS1021A, because it relied only on false data and no
actual experimentation.

Interestingly, in commit c2f448cff22a ("tty: serial: fsl_lpuart: add
LS1028A support"), Michael Walle applied a workaround to this by manually
setting the FIFO widths for LS1028A. It looks like the same values are
used by LS1021A as well, in fact.

When the driver thinks that it has a deeper FIFO than it really has,
getty (user space) output gets truncated.

Many thanks to Michael for pointing out where to look.

Fixes: f77ebb241ce0 ("tty: serial: fsl_lpuart: correct the FIFO depth size")
Suggested-by: Michael Walle 
Signed-off-by: Vladimir Oltean 
Link: https://lore.kernel.org/r/20201023013429.3551026-1-vladimir.oltean@nxp.com
Reviewed-by：Fugang Duan 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty: serial: fsl_lpuart: add LS1028A support

2020-11-10T11:37:33+00:00

commit c2f448cff22a7ed09281f02bde084b0ce3bc61ed upstream.

The LS1028A uses little endian register access and has a different FIFO
size encoding.

Signed-off-by: Michael Walle 
Link: https://lore.kernel.org/r/20200306214433.23215-4-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman

serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init

2020-11-10T11:37:32+00:00

commit 0c5fc92622ed5531ff324b20f014e9e3092f0187 upstream.

Add the missing platform_driver_unregister() before return
from serial_txx9_init in the error handling case when failed
to register serial_txx9_pci_driver with macro ENABLE_SERIAL_TXX9_PCI
defined.

Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/")
Signed-off-by: Qinglang Miao 
Link: https://lore.kernel.org/r/20201103084942.109076-1-miaoqinglang@huawei.com
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_mtk: Fix uart_get_baud_rate warning

2020-11-10T11:37:32+00:00

commit 912ab37c798770f21b182d656937072b58553378 upstream.

Mediatek 8250 port supports speed higher than uartclk / 16. If the baud
rates in both the new and the old termios setting are higher than
uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered.
Passing NULL as the old termios so uart_get_baud_rate() will use
uartclk / 16 - 1 as the new baud rate which will be replaced by the
original baud rate later by tty_termios_encode_baud_rate() in
mtk8250_set_termios().

Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping")
Signed-off-by: Claire Chang 
Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

vt: Disable KD_FONT_OP_COPY

2020-11-10T11:37:31+00:00

commit 3c4e0dff2095c579b142d5a0693257f1c58b4804 upstream.

It's buggy:

On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ).  The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
>  for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use  KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.

Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
  and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
  not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016

Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken

https://github.com/systemd/systemd/pull/3651

So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.

Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.

Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:

	/* copy font from active VT, where the font was uploaded to */
	cfo.op = KD_FONT_OP_COPY;
	cfo.height = vcs.v_active-1; /* tty1 == index 0 */
	(void) ioctl(vcfd, KDFONTOP, &cfo);

Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.

v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.

Acked-by: Peilin Ye 
Reported-by: Minh Yuan 
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH 
Cc: Peilin Ye 
Cc: Tetsuo Handa 
Signed-off-by: Daniel Vetter 
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman

tty: make FONTX ioctl use the tty pointer they were actually passed

2020-11-05T10:43:36+00:00

commit 90bfdeef83f1d6c696039b6a917190dcbbad3220 upstream.

Some of the font tty ioctl's always used the current foreground VC for
their operations.  Don't do that then.

This fixes a data race on fg_console.

Side note: both Michael Ellerman and Jiri Slaby point out that all these
ioctls are deprecated, and should probably have been removed long ago,
and everything seems to be using the KDFONTOP ioctl instead.

In fact, Michael points out that it looks like busybox's loadfont
program seems to have switched over to using KDFONTOP exactly _because_
of this bug (ahem.. 12 years ago ;-).

Reported-by: Minh Yuan 
Acked-by: Michael Ellerman 
Acked-by: Jiri Slaby 
Cc: Greg KH 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

vt: keyboard, extend func_buf_lock to readers

2020-11-05T10:43:29+00:00

commit 82e61c3909db51d91b9d3e2071557b6435018b80 upstream.

Both read-side users of func_table/func_buf need locking. Without that,
one can easily confuse the code by repeatedly setting altering strings
like:
while (1)
	for (a = 0; a < 2; a++) {
		struct kbsentry kbs = {};
		strcpy((char *)kbs.kb_string, a ? ".\n" : "88888\n");
		ioctl(fd, KDSKBSENT, &kbs);
	}

When that program runs, one can get unexpected output by holding F1
(note the unxpected period on the last line):
.
88888
.8888

So protect all accesses to 'func_table' (and func_buf) by preexisting
'func_buf_lock'.

It is easy in 'k_fn' handler as 'puts_queue' is expected not to sleep.
On the other hand, KDGKBSENT needs a local (atomic) copy of the string
because copy_to_user can sleep. Use already allocated, but unused
'kbs->kb_string' for that purpose.

Note that the program above needs at least CAP_SYS_TTY_CONFIG.

This depends on the previous patch and on the func_buf_lock lock added
in commit 46ca3f735f34 (tty/vt: fix write/write race in ioctl(KDSKBSENT)
handler) in 5.2.

Likely fixes CVE-2020-25656.

Cc: 
Reported-by: Minh Yuan 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20201019085517.10176-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

vt: keyboard, simplify vt_kdgkbsent

2020-11-05T10:43:29+00:00

commit 6ca03f90527e499dd5e32d6522909e2ad390896b upstream.

Use 'strlen' of the string, add one for NUL terminator and simply do
'copy_to_user' instead of the explicit 'for' loop. This makes the
KDGKBSENT case more compact.

The only thing we need to take care about is NULL 'func_table[i]'. Use
an empty string in that case.

The original check for overflow could never trigger as the func_buf
strings are always shorter or equal to 'struct kbsentry's.

Cc: 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20201019085517.10176-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt

2020-11-01T11:01:06+00:00

commit 534cf755d9df99e214ddbe26b91cd4d81d2603e2 upstream.

Issuing a magic-sysrq via the PL011 causes the following lockdep splat,
which is easily reproducible under QEMU:

  | sysrq: Changing Loglevel
  | sysrq: Loglevel set to 9
  |
  | ======================================================
  | WARNING: possible circular locking dependency detected
  | 5.9.0-rc7 #1 Not tainted
  | ------------------------------------------------------
  | systemd-journal/138 is trying to acquire lock:
  | ffffab133ad950c0 (console_owner){-.-.}-{0:0}, at: console_lock_spinning_enable+0x34/0x70
  |
  | but task is already holding lock:
  | ffff0001fd47b098 (&port_lock_key){-.-.}-{2:2}, at: pl011_int+0x40/0x488
  |
  | which lock already depends on the new lock.

  [...]

  |  Possible unsafe locking scenario:
  |
  |        CPU0                    CPU1
  |        ----                    ----
  |   lock(&port_lock_key);
  |                                lock(console_owner);
  |                                lock(&port_lock_key);
  |   lock(console_owner);
  |
  |  *** DEADLOCK ***

The issue being that CPU0 takes 'port_lock' on the irq path in pl011_int()
before taking 'console_owner' on the printk() path, whereas CPU1 takes
the two locks in the opposite order on the printk() path due to setting
the "console_owner" prior to calling into into the actual console driver.

Fix this in the same way as the msm-serial driver by dropping 'port_lock'
before handling the sysrq.

Cc:  # 4.19+
Cc: Russell King 
Cc: Greg Kroah-Hartman 
Cc: Jiri Slaby 
Link: https://lore.kernel.org/r/20200811101313.GA6970@willie-the-truck
Signed-off-by: Peter Zijlstra 
Tested-by: Will Deacon 
Signed-off-by: Will Deacon 
Link: https://lore.kernel.org/r/20200930120432.16551-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman

serial: qcom_geni_serial: To correct QUP Version detection logic

2020-11-01T11:01:06+00:00

commit c9ca43d42ed8d5fd635d327a664ed1d8579eb2af upstream.

For QUP IP versions 2.5 and above the oversampling rate is
halved from 32 to 16.

Commit ce734600545f ("tty: serial: qcom_geni_serial: Update
the oversampling rate") is pushed to handle this scenario.
But the existing logic is failing to classify QUP Version 3.0
into the correct group ( 2.5 and above).

As result Serial Engine clocks are not configured properly for
baud rate and garbage data is sampled to FIFOs from the line.

So, fix the logic to detect QUP with versions 2.5 and above.

Fixes: ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate")
Cc: stable 
Signed-off-by: Paras Sharma 
Reviewed-by: Akash Asthana 
Link: https://lore.kernel.org/r/1601445926-23673-1-git-send-email-parashar@codeaurora.org
Signed-off-by: Greg Kroah-Hartman