linux-stable.git/drivers/tty, branch v5.4.237

tty: serial: fsl_lpuart: disable the CTS when send break signal

2023-03-11T15:44:14+00:00

[ Upstream commit c4c81db5cf8bc53d6160c3abf26d382c841aa434 ]

LPUART IP has a bug that it treats the CTS as higher priority than the
break signal, which cause the break signal sending through UARTCTRL_SBK
may impacted by the CTS input if the HW flow control is enabled.

Add this workaround patch to fix the IP bug, we can disable CTS before
asserting SBK to avoid any interference from CTS, and re-enable it when
break off.

Such as for the bluetooth chip power save feature, host can let the BT
chip get into sleep state by sending a UART break signal, and wake it up
by turning off the UART break. If the BT chip enters the sleep mode
successfully, it will pull up the CTS line, if the BT chip is woken up,
it will pull down the CTS line. If without this workaround patch, the
UART TX pin cannot send the break signal successfully as it affected by
the BT CTS pin. After adding this patch, the BT power save feature can
work well.

Signed-off-by: Sherry Sun 
Link: https://lore.kernel.org/r/20221214031137.28815-2-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: fix out-of-bounds access in tty_driver_lookup_tty()

2023-03-11T15:44:14+00:00

[ Upstream commit db4df8e9d79e7d37732c1a1b560958e8dadfefa1 ]

When specifying an invalid console= device like console=tty3270,
tty_driver_lookup_tty() returns the tty struct without checking
whether index is a valid number.

To reproduce:

qemu-system-x86_64 -enable-kvm -nographic -serial mon:stdio \
-kernel ../linux-build-x86/arch/x86/boot/bzImage \
-append "console=ttyS0 console=tty3270"

This crashes with:

[    0.770599] BUG: kernel NULL pointer dereference, address: 00000000000000ef
[    0.771265] #PF: supervisor read access in kernel mode
[    0.771773] #PF: error_code(0x0000) - not-present page
[    0.772609] Oops: 0000 [#1] PREEMPT SMP PTI
[    0.774878] RIP: 0010:tty_open+0x268/0x6f0
[    0.784013]  chrdev_open+0xbd/0x230
[    0.784444]  ? cdev_device_add+0x80/0x80
[    0.784920]  do_dentry_open+0x1e0/0x410
[    0.785389]  path_openat+0xca9/0x1050
[    0.785813]  do_filp_open+0xaa/0x150
[    0.786240]  file_open_name+0x133/0x1b0
[    0.786746]  filp_open+0x27/0x50
[    0.787244]  console_on_rootfs+0x14/0x4d
[    0.787800]  kernel_init_freeable+0x1e4/0x20d
[    0.788383]  ? rest_init+0xc0/0xc0
[    0.788881]  kernel_init+0x11/0x120
[    0.789356]  ret_from_fork+0x22/0x30

Signed-off-by: Sven Schnelle 
Reviewed-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20221209112737.3222509-2-svens@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

vc_screen: modify vcs_size() handling in vcs_read()

2023-03-11T15:44:12+00:00

[ Upstream commit 46d733d0efc79bc8430d63b57ab88011806d5180 ]

Restore the vcs_size() handling in vcs_read() to what
it had been in previous version.

Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Suggested-by: Jiri Slaby 
Signed-off-by: George Kennedy 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()

2023-03-11T15:43:42+00:00

[ Upstream commit b13fecb1c3a603c4b8e99b306fecf4f668c11b32 ]

This converts all the existing DECLARE_TASKLET() (and ...DISABLED)
macros with DECLARE_TASKLET_OLD() in preparation for refactoring the
tasklet callback type. All existing DECLARE_TASKLET() users had a "0"
data argument, it has been removed here as well.

Reviewed-by: Greg Kroah-Hartman 
Acked-by: Thomas Gleixner 
Signed-off-by: Kees Cook 
Stable-dep-of: 1fdeb8b9f29d ("wifi: iwl3945: Add missing check for create_singlethread_workqueue")
Signed-off-by: Sasha Levin

vc_screen: don't clobber return value in vcs_read

2023-03-03T10:41:48+00:00

commit ae3419fbac845b4d3f3a9fae4cc80c68d82cdf6e upstream.

Commit 226fae124b2d ("vc_screen: move load of struct vc_data pointer in
vcs_read() to avoid UAF") moved the call to vcs_vc() into the loop.

While doing this it also moved the unconditional assignment of

	ret = -ENXIO;

This unconditional assignment was valid outside the loop but within it
it clobbers the actual value of ret.

To avoid this only assign "ret = -ENXIO" when actually needed.

[ Also, the 'goto unlock_out" needs to be just a "break", so that it
  does the right thing when it exits on later iterations when partial
  success has happened - Linus ]

Reported-by: Storm Dragon 
Link: https://lore.kernel.org/lkml/Y%2FKS6vdql2pIsCiI@hotmail.com/
Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Signed-off-by: Thomas Weißschuh 
Link: https://lore.kernel.org/lkml/64981d94-d00c-4b31-9063-43ad0a384bde@t-8ch.de/
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dma: Fix DMA Rx rearm race

2023-02-22T11:50:29+00:00

commit 57e9af7831dcf211c5c689c2a6f209f4abdf0bce upstream.

As DMA Rx can be completed from two places, it is possible that DMA Rx
completes before DMA completion callback had a chance to complete it.
Once the previous DMA Rx has been completed, a new one can be started
on the next UART interrupt. The following race is possible
(uart_unlock_and_check_sysrq_irqrestore() replaced with
spin_unlock_irqrestore() for simplicity/clarity):

CPU0					CPU1
					dma_rx_complete()
serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma_flush()
      __dma_rx_complete()
        dma->rx_running = 0
        // Complete DMA Rx
  spin_unlock_irqrestore(&port->lock)

serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma()
      dma->rx_running = 1
      // Setup a new DMA Rx
  spin_unlock_irqrestore(&port->lock)

					  spin_lock_irqsave(&port->lock)
					  // sees dma->rx_running = 1
					  __dma_rx_complete()
					    dma->rx_running = 0
					    // Incorrectly complete
					    // running DMA Rx

This race seems somewhat theoretical to occur for real but handle it
correctly regardless. Check what is the DMA status before complething
anything in __dma_rx_complete().

Reported-by: Gilles BULOZ 
Tested-by: Gilles BULOZ 
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dma: Fix DMA Rx completion race

2023-02-22T11:50:29+00:00

commit 31352811e13dc2313f101b890fd4b1ce760b5fe7 upstream.

__dma_rx_complete() is called from two places:
  - Through the DMA completion callback dma_rx_complete()
  - From serial8250_rx_dma_flush() after IIR_RLSI or IIR_RX_TIMEOUT
The former does not hold port's lock during __dma_rx_complete() which
allows these two to race and potentially insert the same data twice.

Extend port's lock coverage in dma_rx_complete() to prevent the race
and check if the DMA Rx is still pending completion before calling
into __dma_rx_complete().

Reported-by: Gilles BULOZ 
Tested-by: Gilles BULOZ 
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20230130114841.25749-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF

2023-02-22T11:50:26+00:00

[ Upstream commit 226fae124b2dac217ea5436060d623ff3385bc34 ]

After a call to console_unlock() in vcs_read() the vc_data struct can be
freed by vc_deallocate(). Because of that, the struct vc_data pointer
load must be done at the top of while loop in vcs_read() to avoid a UAF
when vcs_size() is called.

Syzkaller reported a UAF in vcs_size().

BUG: KASAN: use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215)
Read of size 4 at addr ffff8881137479a8 by task 4a005ed81e27e65/1537

CPU: 0 PID: 1537 Comm: 4a005ed81e27e65 Not tainted 6.2.0-rc5 #1
Hardware name: Red Hat KVM, BIOS 1.15.0-2.module
Call Trace:
  
__asan_report_load4_noabort (mm/kasan/report_generic.c:350)
vcs_size (drivers/tty/vt/vc_screen.c:215)
vcs_read (drivers/tty/vt/vc_screen.c:415)
vfs_read (fs/read_write.c:468 fs/read_write.c:450)
...
  

Allocated by task 1191:
...
kmalloc_trace (mm/slab_common.c:1069)
vc_allocate (./include/linux/slab.h:580 ./include/linux/slab.h:720
     drivers/tty/vt/vt.c:1128 drivers/tty/vt/vt.c:1108)
con_install (drivers/tty/vt/vt.c:3383)
tty_init_dev (drivers/tty/tty_io.c:1301 drivers/tty/tty_io.c:1413
     drivers/tty/tty_io.c:1390)
tty_open (drivers/tty/tty_io.c:2080 drivers/tty/tty_io.c:2126)
chrdev_open (fs/char_dev.c:415)
do_dentry_open (fs/open.c:883)
vfs_open (fs/open.c:1014)
...

Freed by task 1548:
...
kfree (mm/slab_common.c:1021)
vc_port_destruct (drivers/tty/vt/vt.c:1094)
tty_port_destructor (drivers/tty/tty_port.c:296)
tty_port_put (drivers/tty/tty_port.c:312)
vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2))
vt_ioctl (drivers/tty/vt/vt_ioctl.c:903)
tty_ioctl (drivers/tty/tty_io.c:2776)
...

The buggy address belongs to the object at ffff888113747800
  which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 424 bytes inside of
  1024-byte region [ffff888113747800, ffff888113747c00)

The buggy address belongs to the physical page:
page:00000000b3fe6c7c refcount:1 mapcount:0 mapping:0000000000000000
     index:0x0 pfn:0x113740
head:00000000b3fe6c7c order:3 compound_mapcount:0 subpages_mapcount:0
     compound_pincount:0
anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0010200 ffff888100042dc0 0000000000000000 dead000000000001
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff888113747880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888113747900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff888113747980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                   ^
  ffff888113747a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888113747a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint

Fixes: ac751efa6a0d ("console: rename acquire/release_console_sem() to console_lock/unlock()")
Reported-by: syzkaller 
Suggested-by: Jiri Slaby 
Signed-off-by: George Kennedy 
Link: https://lore.kernel.org/r/1674577014-12374-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: atmel: fix incorrect baudrate setup

2023-01-24T06:18:01+00:00

commit 5bfdd3c654bd879bff50c2e85e42f85ae698b42f upstream.

Commit ba47f97a18f2 ("serial: core: remove baud_rates when serial console
setup") changed uart_set_options to select the correct baudrate
configuration based on the absolute error between requested baudrate and
available standard baudrate settings.
Prior to that commit the baudrate was selected based on which predefined
standard baudrate did not exceed the requested baudrate.
This change of selection logic was never reflected in the atmel serial
driver. Thus the comment left in the atmel serial driver is no longer
accurate.
Additionally the manual rounding up described in that comment and applied
via (quot - 1) requests an incorrect baudrate. Since uart_set_options uses
tty_termios_encode_baud_rate to determine the appropriate baudrate flags
this can cause baudrate selection to fail entirely because
tty_termios_encode_baud_rate will only select a baudrate if relative error
between requested and selected baudrate does not exceed +/-2%.
Fix that by requesting actual, exact baudrate used by the serial.

Fixes: ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup")
Cc: stable 
Signed-off-by: Tobias Schramm 
Acked-by: Richard Genoud 
Link: https://lore.kernel.org/r/20230109072940.202936-1-t.schramm@manjaro.org
Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: Pass correct sg to dma_unmap_sg()

2023-01-24T06:18:01+00:00

commit e8914b52e5b024e4af3d810a935fe0805eee8a36 upstream.

A local variable sg is used to store scatterlist pointer in
pch_dma_tx_complete(). The for loop doing Tx byte accounting before
dma_unmap_sg() alters sg in its increment statement. Therefore, the
pointer passed into dma_unmap_sg() won't match to the one given to
dma_map_sg().

To fix the problem, use priv->sg_tx_p directly in dma_unmap_sg()
instead of the local variable.

Fixes: da3564ee027e ("pch_uart: add multi-scatter processing")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20230103093435.4396-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman