linux-stable.git/drivers/tty, branch v5.4.217 Linux kernel stable tree serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting 2022-09-28T09:04:08+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-09-01T14:39:34+00:00 9eb710d1843aeef8166a5a23bd7e374c584375ae commit 1d10cd4da593bc0196a239dcc54dac24b6b0a74e upstream. Tx'ing does not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: 2d908b38d409 ("serial: Add Tegra Combined UART driver") Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220901143934.8850-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1d10cd4da593bc0196a239dcc54dac24b6b0a74e upstream.

Tx'ing does not correctly account Tx'ed characters into icount.tx.
Using uart_xmit_advance() fixes the problem.

Fixes: 2d908b38d409 ("serial: Add Tegra Combined UART driver")
Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance()
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting 2022-09-28T09:04:08+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-09-01T14:39:33+00:00 6cc0434f9d44eae6e6b4d334a7837f9e883de97e commit 754f68044c7dd6c52534ba3e0f664830285c4b15 upstream. DMA complete & stop paths did not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 754f68044c7dd6c52534ba3e0f664830285c4b15 upstream.

DMA complete & stop paths did not correctly account Tx'ed characters
into icount.tx. Using uart_xmit_advance() fixes the problem.

Fixes: e9ea096dd225 ("serial: tegra: add serial driver")
Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance()
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: atmel: Preserve previous USART mode if RS485 disabled 2022-09-28T09:04:02+00:00 Sergiu Moga sergiu.moga@microchip.com 2022-08-24T14:29:03+00:00 da8ac086943eb93199e41530f1b89f180e0edf32 [ Upstream commit 692a8ebcfc24f4a5bea0eb2967e450f584193da6 ] Whenever the atmel_rs485_config() driver method would be called, the USART mode is reset to normal mode before even checking if RS485 flag is set, thus resulting in losing the previous USART mode in the case where the checking fails. Some tools, such as `linux-serial-test`, lead to the driver calling this method when doing the setup of the serial port: after setting the port mode (Hardware Flow Control, Normal Mode, RS485 Mode, etc.), `linux-serial-test` tries to enable/disable RS485 depending on the commandline arguments that were passed. Example of how this issue could reveal itself: When doing a serial communication with Hardware Flow Control through `linux-serial-test`, the tool would lead to the driver roughly doing the following: - set the corresponding bit to 1 (ATMEL_US_USMODE_HWHS bit in the ATMEL_US_MR register) through the atmel_set_termios() to enable Hardware Flow Control - disable RS485 through the atmel_config_rs485() method Thus, when the latter is called, the mode will be reset and the previously set bit is unset, leaving USART in normal mode instead of the expected Hardware Flow Control mode. This fix ensures that this reset is only done if the checking for RS485 succeeds and that the previous mode is preserved otherwise. Fixes: e8faff7330a35 ("ARM: 6092/1: atmel_serial: support for RS485 communications") Cc: stable <stable@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Link: https://lore.kernel.org/r/20220824142902.502596-1-sergiu.moga@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 692a8ebcfc24f4a5bea0eb2967e450f584193da6 ]

Whenever the atmel_rs485_config() driver method would be called,
the USART mode is reset to normal mode before even checking if
RS485 flag is set, thus resulting in losing the previous USART
mode in the case where the checking fails.

Some tools, such as `linux-serial-test`, lead to the driver calling
this method when doing the setup of the serial port: after setting the
port mode (Hardware Flow Control, Normal Mode, RS485 Mode, etc.),
`linux-serial-test` tries to enable/disable RS485 depending on
the commandline arguments that were passed.

Example of how this issue could reveal itself:
When doing a serial communication with Hardware Flow Control through
`linux-serial-test`, the tool would lead to the driver roughly doing
the following:
- set the corresponding bit to 1 (ATMEL_US_USMODE_HWHS bit in the
ATMEL_US_MR register) through the atmel_set_termios() to enable
Hardware Flow Control
- disable RS485 through the atmel_config_rs485() method
Thus, when the latter is called, the mode will be reset and the
previously set bit is unset, leaving USART in normal mode instead of
the expected Hardware Flow Control mode.

This fix ensures that this reset is only done if the checking for
RS485 succeeds and that the previous mode is preserved otherwise.

Fixes: e8faff7330a35 ("ARM: 6092/1: atmel_serial: support for RS485 communications")
Cc: stable <stable@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Link: https://lore.kernel.org/r/20220824142902.502596-1-sergiu.moga@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: atmel: remove redundant assignment in rs485_config 2022-09-28T09:04:02+00:00 Lino Sanfilippo LinoSanfilippo@gmx.de 2022-04-10T10:46:42+00:00 e56a402819974b8f4b9e79fb3bd7a6b82f2c0fe9 [ Upstream commit 60efd0513916f195dd85bfbf21653f74f9ab019c ] In uart_set_rs485_config() the serial core already assigns the passed serial_rs485 struct to the uart port. So remove the assignment from the drivers rs485_config() function to avoid redundancy. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20220410104642.32195-10-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 692a8ebcfc24 ("tty: serial: atmel: Preserve previous USART mode if RS485 disabled") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 60efd0513916f195dd85bfbf21653f74f9ab019c ]

In uart_set_rs485_config() the serial core already assigns the passed
serial_rs485 struct to the uart port.

So remove the assignment from the drivers rs485_config() function to avoid
redundancy.

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20220410104642.32195-10-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 692a8ebcfc24 ("tty: serial: atmel: Preserve previous USART mode if RS485 disabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending data 2022-09-28T09:04:02+00:00 Codrin.Ciubotariu@microchip.com Codrin.Ciubotariu@microchip.com 2020-01-07T11:17:47+00:00 85a64208b319183cf565fda94a3db427f6eb1d54 [ Upstream commit 477b8383100023ea0769979cff67e9be3a720397 ] At this moment, TXEMPTY is checked before sending data on RS485 and ISO7816 modes. However, TXEMPTY is risen when FIFO (if used) or the Transmit Shift Register are empty, even though TXRDY might be up and controller is able to receive data. Since the controller sends data only when TXEMPTY is ready, on RS485, when DMA is not used, the RTS pin is driven low after each byte. With this patch, the characters will be transmitted when TXRDY is up and so, RTS pin will remain high between bytes. The performance improvement on RS485 is about 8% with a baudrate of 300. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/20200107111656.26308-1-codrin.ciubotariu@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 692a8ebcfc24 ("tty: serial: atmel: Preserve previous USART mode if RS485 disabled") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 477b8383100023ea0769979cff67e9be3a720397 ]

At this moment, TXEMPTY is checked before sending data on RS485 and ISO7816
modes. However, TXEMPTY is risen when FIFO (if used) or the Transmit Shift
Register are empty, even though TXRDY might be up and controller is able to
receive data. Since the controller sends data only when TXEMPTY is ready,
on RS485, when DMA is not used, the RTS pin is driven low after each byte.
With this patch, the characters will be transmitted when TXRDY is up and
so, RTS pin will remain high between bytes.
The performance improvement on RS485 is about 8% with a baudrate of 300.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/20200107111656.26308-1-codrin.ciubotariu@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 692a8ebcfc24 ("tty: serial: atmel: Preserve previous USART mode if RS485 disabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete 2022-09-15T10:04:51+00:00 Sherry Sun sherry.sun@nxp.com 2022-08-21T10:15:27+00:00 a6b7e8d975308371b21425faefcfbd14d267d353 commit d5a2e0834364377a5d5a2fff1890a0b3f0bafd1f upstream. When the user initializes the uart port, and waits for the transmit engine to complete in lpuart32_set_termios(), if the UART TX fifo has dirty data and the UARTMODIR enable the flow control, the TX fifo may never be empty. So here we should disable the flow control first to make sure the transmit engin can complete. Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d5a2e0834364377a5d5a2fff1890a0b3f0bafd1f upstream.

When the user initializes the uart port, and waits for the transmit
engine to complete in lpuart32_set_termios(), if the UART TX fifo has
dirty data and the UARTMODIR enable the flow control, the TX fifo may
never be empty. So here we should disable the flow control first to make
sure the transmit engin can complete.

Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vt: Clear selection before changing the font 2022-09-15T10:04:51+00:00 Helge Deller deller@gmx.de 2022-07-30T18:50:18+00:00 1cf1930369c9dc428d827b60260c53271bff3285 commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream. When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called. Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Tested-by: Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream.

When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().

Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.

Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Tested-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: fsl_lpuart: RS485 RTS polariy is inverse 2022-09-15T10:04:50+00:00 Shenwei Wang shenwei.wang@nxp.com 2022-08-05T14:45:29+00:00 a65a2a33c6d088e881408eb6b473ef5235942e8b commit 846651eca073e2e02e37490a4a52752415d84781 upstream. The setting of RS485 RTS polarity is inverse in the current driver. When the property of 'rs485-rts-active-low' is enabled in the dts node, the RTS signal should be LOW during sending. Otherwise, if there is no such a property, the RTS should be HIGH during sending. Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485") Cc: stable <stable@kernel.org> Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 846651eca073e2e02e37490a4a52752415d84781 upstream.

The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: Fix refcount leak bug in ucc_uart.c 2022-08-25T09:18:36+00:00 Liang He windhl@126.com 2022-06-18T06:08:50+00:00 ca3fc1c38e4253bc019881301a28ea60b8b0bca3 [ Upstream commit d24d7bb2cd947676f9b71fb944d045e09b8b282f ] In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d24d7bb2cd947676f9b71fb944d045e09b8b282f ]

In soc_info(), of_find_node_by_type() will return a node pointer
with refcount incremented. We should use of_node_put() when it is
not used anymore.

Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: n_gsm: fix missing corner cases in gsmld_poll() 2022-08-25T09:18:03+00:00 Daniel Starke daniel.starke@siemens.com 2022-07-07T11:32:23+00:00 44913ccfa1d58259688ea9b65877c3894fd9c671 [ Upstream commit 7e5b4322cde067e1d0f1bf8f490e93f664a7c843 ] gsmld_poll() currently fails to handle the following corner cases correctly: - remote party closed the associated tty Add the missing checks and map those to EPOLLHUP. Reorder the checks to group them by their reaction. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220707113223.3685-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7e5b4322cde067e1d0f1bf8f490e93f664a7c843 ]

gsmld_poll() currently fails to handle the following corner cases correctly:
- remote party closed the associated tty

Add the missing checks and map those to EPOLLHUP.
Reorder the checks to group them by their reaction.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220707113223.3685-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>