linux-stable.git/drivers/tty, branch v5.4.201 Linux kernel stable tree serial: 8250: Store to lsr_save_flags after lsr read 2022-06-22T12:11:23+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-05-20T10:35:41+00:00 64d2df6480036ea28633fc545521fb6b24725b43 commit be03b0651ffd8bab69dfd574c6818b446c0753ce upstream. Not all LSR register flags are preserved across reads. Therefore, LSR readers must store the non-preserved bits into lsr_save_flags. This fix was initially mixed into feature commit f6f586102add ("serial: 8250: Handle UART without interrupt on TEMT using em485"). However, that feature change had a flaw and it was reverted to make room for simpler approach providing the same feature. The embedded fix got reverted with the feature change. Re-add the lsr_save_flags fix and properly mark it's a fix. Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Cc: stable <stable@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be03b0651ffd8bab69dfd574c6818b446c0753ce upstream.

Not all LSR register flags are preserved across reads. Therefore, LSR
readers must store the non-preserved bits into lsr_save_flags.

This fix was initially mixed into feature commit f6f586102add ("serial:
8250: Handle UART without interrupt on TEMT using em485"). However,
that feature change had a flaw and it was reverted to make room for
simpler approach providing the same feature. The embedded fix got
reverted with the feature change.

Re-add the lsr_save_flags fix and properly mark it's a fix.

Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc
Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250")
Cc: stable <stable@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: goldfish: Fix free_irq() on remove 2022-06-22T12:11:22+00:00 Vincent Whitchurch vincent.whitchurch@axis.com 2022-06-09T14:17:04+00:00 f7183c76d500324b8b5bd0af5e663cfa57b7b836 [ Upstream commit 499e13aac6c762e1e828172b0f0f5275651d6512 ] Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ... Fixes: 465893e18878e119 ("tty: goldfish: support platform_device with id -1") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220609141704.1080024-1-vincent.whitchurch@axis.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 499e13aac6c762e1e828172b0f0f5275651d6512 ]

Pass the correct dev_id to free_irq() to fix this splat when the driver
is unbound:

 WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq
 Trying to free already-free IRQ 65
 Call Trace:
  warn_slowpath_fmt
  free_irq
  goldfish_tty_remove
  platform_remove
  device_remove
  device_release_driver_internal
  device_driver_detach
  unbind_store
  drv_attr_store
  ...

Fixes: 465893e18878e119 ("tty: goldfish: support platform_device with id -1")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220609141704.1080024-1-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: msm_serial: disable interrupts in __msm_console_write() 2022-06-14T16:12:00+00:00 John Ogness john.ogness@linutronix.de 2022-05-06T21:33:24+00:00 19f4b51b836d44bbeeab605a6c65fb479a79f0f3 [ Upstream commit aabdbb1b7a5819e18c403334a31fb0cc2c06ad41 ] __msm_console_write() assumes that interrupts are disabled, but with threaded console printers it is possible that the write() callback of the console is called with interrupts enabled. Explicitly disable interrupts using local_irq_save() to preserve the assumed context. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit aabdbb1b7a5819e18c403334a31fb0cc2c06ad41 ]

__msm_console_write() assumes that interrupts are disabled, but
with threaded console printers it is possible that the write()
callback of the console is called with interrupts enabled.

Explicitly disable interrupts using local_irq_save() to preserve
the assumed context.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers: tty: serial: Fix deadlock in sa1100_set_termios() 2022-06-14T16:11:59+00:00 Duoming Zhou duoming@zju.edu.cn 2022-04-17T11:16:26+00:00 09a5958a2452ad22d0cb638711ef34ea1863a829 [ Upstream commit 62b2caef400c1738b6d22f636c628d9f85cd4c4c ] There is a deadlock in sa1100_set_termios(), which is shown below: (Thread 1) | (Thread 2) | sa1100_enable_ms() sa1100_set_termios() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | sa1100_timeout() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold sport->port.lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need sport->port.lock in position (2) of thread 2. As a result, sa1100_set_termios() will block forever. This patch moves del_timer_sync() before spin_lock_irqsave() in order to prevent the deadlock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417111626.7802-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 62b2caef400c1738b6d22f636c628d9f85cd4c4c ]

There is a deadlock in sa1100_set_termios(), which is shown
below:

   (Thread 1)              |      (Thread 2)
                           | sa1100_enable_ms()
sa1100_set_termios()       |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | sa1100_timeout()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold sport->port.lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need sport->port.lock in position (2) of thread 2. As a result,
sa1100_set_termios() will block forever.

This patch moves del_timer_sync() before spin_lock_irqsave()
in order to prevent the deadlock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417111626.7802-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: Fix a possible resource leak in icom_probe 2022-06-14T16:11:59+00:00 Huang Guobin huangguobin4@huawei.com 2022-03-31T09:10:05+00:00 8c014373f178a4f13a08e045ef63bdb23f62e892 [ Upstream commit ee157a79e7c82b01ae4c25de0ac75899801f322c ] When pci_read_config_dword failed, call pci_release_regions() and pci_disable_device() to recycle the resource previously allocated. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Link: https://lore.kernel.org/r/20220331091005.3290753-1-huangguobin4@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ee157a79e7c82b01ae4c25de0ac75899801f322c ]

When pci_read_config_dword failed, call pci_release_regions() and
pci_disable_device() to recycle the resource previously allocated.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Link: https://lore.kernel.org/r/20220331091005.3290753-1-huangguobin4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: synclink_gt: Fix null-pointer-dereference in slgt_clean() 2022-06-14T16:11:59+00:00 Zheyu Ma zheyuma97@gmail.com 2022-04-10T11:48:14+00:00 f6e07eb7ebec53ffe81fc2489589320fbe4a6b75 [ Upstream commit 689ca31c542687709ba21ec2195c1fbce34fd029 ] When the driver fails at alloc_hdlcdev(), and then we remove the driver module, we will get the following splat: [ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI [ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17] [ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0 [ 25.077709] Call Trace: [ 25.077924] <TASK> [ 25.078108] unregister_hdlc_device+0x16/0x30 [ 25.078481] slgt_cleanup+0x157/0x9f0 [synclink_gt] Fix this by checking whether the 'info->netdev' is a null pointer first. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220410114814.3920474-1-zheyuma97@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 689ca31c542687709ba21ec2195c1fbce34fd029 ]

When the driver fails at alloc_hdlcdev(), and then we remove the driver
module, we will get the following splat:

[   25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI
[   25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17]
[   25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0
[   25.077709] Call Trace:
[   25.077924]  <TASK>
[   25.078108]  unregister_hdlc_device+0x16/0x30
[   25.078481]  slgt_cleanup+0x157/0x9f0 [synclink_gt]

Fix this by checking whether the 'info->netdev' is a null pointer first.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220410114814.3920474-1-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: stm32-usart: Correct CSIZE, bits, and parity 2022-06-14T16:11:54+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-05-19T08:18:07+00:00 c3a16e7c862420e7aa1cc3c545693d13c426ee72 [ Upstream commit 1deeda8d2877c18bc2b9eeee10dd6d2628852848 ] Add CSIZE sanitization for unsupported CSIZE configurations. In addition, if parity is asked for but CSx was unsupported, the sensible result is CS8+parity which requires setting USART_CR1_M0 like with 9 bits. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c8a9d043947b (serial: stm32: fix word length configuration) Cc: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1deeda8d2877c18bc2b9eeee10dd6d2628852848 ]

Add CSIZE sanitization for unsupported CSIZE configurations. In
addition, if parity is asked for but CSx was unsupported, the sensible
result is CS8+parity which requires setting USART_CR1_M0 like with 9
bits.

Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c8a9d043947b (serial: stm32: fix word length configuration)
Cc: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 2022-06-14T16:11:53+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-05-19T08:18:06+00:00 29d963635ee6ed14f186d7b65e8ee2fc708b518e [ Upstream commit 52bb1cb7118564166b04d52387bd8403632f5190 ] Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has to have parity, thus add PARENB. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.) Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 52bb1cb7118564166b04d52387bd8403632f5190 ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or
CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has
to have parity, thus add PARENB.

Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.)
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: sifive: Sanitize CSIZE and c_iflag 2022-06-14T16:11:53+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-05-19T08:18:05+00:00 5c01c19f64c7731391307cb31e19b7b50e68527f [ Upstream commit c069d2756c01ed36121fae6a42c14fdf1325c71d ] Only CS8 is supported but CSIZE was not sanitized to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Similarly, INPCK, PARMRK, and BRKINT are reported textually unsupported but were not cleared in termios c_iflag which is the machine-readable format. Fixes: 45c054d0815b (tty: serial: add driver for the SiFive UART) Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c069d2756c01ed36121fae6a42c14fdf1325c71d ]

Only CS8 is supported but CSIZE was not sanitized to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Similarly, INPCK, PARMRK, and BRKINT are reported textually unsupported
but were not cleared in termios c_iflag which is the machine-readable
format.

Fixes: 45c054d0815b (tty: serial: add driver for the SiFive UART)
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: sh-sci: Don't allow CS5-6 2022-06-14T16:11:53+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-05-19T08:18:04+00:00 841cab744cc0dbef471905b8229bda460e89cffe [ Upstream commit 9b87162de8be26bf3156460b37deee6399fd0fcb ] Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9b87162de8be26bf3156460b37deee6399fd0fcb ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized from
CS5 or CS6 to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>