linux-stable.git/drivers/tty, branch v5.10.83 Linux kernel stable tree tty: hvc: replace BUG_ON() with negative return value 2021-12-01T08:19:10+00:00 Juergen Gross jgross@suse.com 2021-07-07T09:10:45+00:00 a94e4a7b77edb1ae20f41c7c53677a9c6cee1fd8 commit e679004dec37566f658a255157d3aed9d762a2b7 upstream. Xen frontends shouldn't BUG() in case of illegal data received from their backends. So replace the BUG_ON()s when reading illegal data from the ring page with negative return values. Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210707091045.460-1-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e679004dec37566f658a255157d3aed9d762a2b7 upstream.

Xen frontends shouldn't BUG() in case of illegal data received from
their backends. So replace the BUG_ON()s when reading illegal data from
the ring page with negative return values.

Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210707091045.460-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc 2021-11-26T09:39:10+00:00 Guanghui Feng guanghuifeng@linux.alibaba.com 2021-10-11T14:08:24+00:00 77e9fed33056f2a88eba9dd4d2d5412f0c7d1f41 [ Upstream commit 3968ddcf05fb4b9409cd1859feb06a5b0550a1c1 ] When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup, which look like this one: Workqueue: events_unbound flush_to_ldisc Call trace: dump_backtrace+0x0/0x1ec show_stack+0x24/0x30 dump_stack+0xd0/0x128 panic+0x15c/0x374 watchdog_timer_fn+0x2b8/0x304 __run_hrtimer+0x88/0x2c0 __hrtimer_run_queues+0xa4/0x120 hrtimer_interrupt+0xfc/0x270 arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x94/0x220 __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x84/0xfc el1_irq+0xc8/0x180 slip_unesc+0x80/0x214 [slip] tty_ldisc_receive_buf+0x64/0x80 tty_port_default_receive_buf+0x50/0x90 flush_to_ldisc+0xbc/0x110 process_one_work+0x1d4/0x4b0 worker_thread+0x180/0x430 kthread+0x11c/0x120 In the testcase pty04, The first process call the write syscall to send data to the pty master. At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is no more data left. When the sender and workqueue running in different core, the sender sends data fastly in full time which will result in workqueue doing work in loop for a long time and occuring softlockup in flush_to_ldisc with kernel configured without preempt. So I add need_resched check and cond_resched in the flush_to_ldisc loop to avoid it. Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com> Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3968ddcf05fb4b9409cd1859feb06a5b0550a1c1 ]

When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:

  Workqueue: events_unbound flush_to_ldisc
  Call trace:
   dump_backtrace+0x0/0x1ec
   show_stack+0x24/0x30
   dump_stack+0xd0/0x128
   panic+0x15c/0x374
   watchdog_timer_fn+0x2b8/0x304
   __run_hrtimer+0x88/0x2c0
   __hrtimer_run_queues+0xa4/0x120
   hrtimer_interrupt+0xfc/0x270
   arch_timer_handler_phys+0x40/0x50
   handle_percpu_devid_irq+0x94/0x220
   __handle_domain_irq+0x88/0xf0
   gic_handle_irq+0x84/0xfc
   el1_irq+0xc8/0x180
   slip_unesc+0x80/0x214 [slip]
   tty_ldisc_receive_buf+0x64/0x80
   tty_port_default_receive_buf+0x50/0x90
   flush_to_ldisc+0xbc/0x110
   process_one_work+0x1d4/0x4b0
   worker_thread+0x180/0x430
   kthread+0x11c/0x120

In the testcase pty04, The first process call the write syscall to send
data to the pty master. At the same time, the workqueue will do the
flush_to_ldisc to pop data in a loop until there is no more data left.
When the sender and workqueue running in different core, the sender sends
data fastly in full time which will result in workqueue doing work in loop
for a long time and occuring softlockup in flush_to_ldisc with kernel
configured without preempt. So I add need_resched check and cond_resched
in the flush_to_ldisc loop to avoid it.

Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: xilinx_uartps: Fix race condition causing stuck TX 2021-11-18T13:04:20+00:00 Anssi Hannula anssi.hannula@bitwise.fi 2021-10-26T10:27:41+00:00 f2886010a8d1a87e4c667f0670839a374ec34a71 [ Upstream commit 88b20f84f0fe47409342669caf3e58a3fc64c316 ] xilinx_uartps .start_tx() clears TXEMPTY when enabling TXEMPTY to avoid any previous TXEVENT event asserting the UART interrupt. This clear operation is done immediately after filling the TX FIFO. However, if the bytes inserted by cdns_uart_handle_tx() are consumed by the UART before the TXEMPTY is cleared, the clear operation eats the new TXEMPTY event as well, causing cdns_uart_isr() to never receive the TXEMPTY event. If there are bytes still queued in circbuf, TX will get stuck as they will never get transferred to FIFO (unless new bytes are queued to circbuf in which case .start_tx() is called again). While the racy missed TXEMPTY occurs fairly often with short data sequences (e.g. write 1 byte), in those cases circbuf is usually empty so no action on TXEMPTY would have been needed anyway. On the other hand, longer data sequences make the race much more unlikely as UART takes longer to consume the TX FIFO. Therefore it is rare for this race to cause visible issues in general. Fix the race by clearing the TXEMPTY bit in ISR *before* filling the FIFO. The TXEMPTY bit in ISR will only get asserted at the exact moment the TX FIFO *becomes* empty, so clearing the bit before filling FIFO does not cause an extra immediate assertion even if the FIFO is initially empty. This is hard to reproduce directly on a normal system, but inserting e.g. udelay(200) after cdns_uart_handle_tx(port), setting 4000000 baud, and then running "dd if=/dev/zero bs=128 of=/dev/ttyPS0 count=50" reliably reproduces the issue on my ZynqMP test system unless this fix is applied. Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20211026102741.2910441-1-anssi.hannula@bitwise.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 88b20f84f0fe47409342669caf3e58a3fc64c316 ]

xilinx_uartps .start_tx() clears TXEMPTY when enabling TXEMPTY to avoid
any previous TXEVENT event asserting the UART interrupt. This clear
operation is done immediately after filling the TX FIFO.

However, if the bytes inserted by cdns_uart_handle_tx() are consumed by
the UART before the TXEMPTY is cleared, the clear operation eats the new
TXEMPTY event as well, causing cdns_uart_isr() to never receive the
TXEMPTY event. If there are bytes still queued in circbuf, TX will get
stuck as they will never get transferred to FIFO (unless new bytes are
queued to circbuf in which case .start_tx() is called again).

While the racy missed TXEMPTY occurs fairly often with short data
sequences (e.g. write 1 byte), in those cases circbuf is usually empty
so no action on TXEMPTY would have been needed anyway. On the other
hand, longer data sequences make the race much more unlikely as UART
takes longer to consume the TX FIFO. Therefore it is rare for this race
to cause visible issues in general.

Fix the race by clearing the TXEMPTY bit in ISR *before* filling the
FIFO.

The TXEMPTY bit in ISR will only get asserted at the exact moment the
TX FIFO *becomes* empty, so clearing the bit before filling FIFO does
not cause an extra immediate assertion even if the FIFO is initially
empty.

This is hard to reproduce directly on a normal system, but inserting
e.g. udelay(200) after cdns_uart_handle_tx(port), setting 4000000 baud,
and then running "dd if=/dev/zero bs=128 of=/dev/ttyPS0 count=50"
reliably reproduces the issue on my ZynqMP test system unless this fix
is applied.

Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20211026102741.2910441-1-anssi.hannula@bitwise.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: imx: fix detach/attach of serial console 2021-11-18T13:04:19+00:00 Stefan Agner stefan@agner.ch 2021-10-20T19:26:42+00:00 068dfa570d8c36da0f1493d97695a04e8e84d8bd [ Upstream commit 6d0d1b5a1b4870911beb89544ec1a9751c42fec7 ] If the device used as a serial console gets detached/attached at runtime, register_console() will try to call imx_uart_setup_console(), but this is not possible since it is marked as __init. For instance # cat /sys/devices/virtual/tty/console/active tty1 ttymxc0 # echo -n N > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console # echo -n Y > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console [ 73.166649] 8<--- cut here --- [ 73.167005] Unable to handle kernel paging request at virtual address c154d928 [ 73.167601] pgd = 55433e84 [ 73.167875] [c154d928] *pgd=8141941e(bad) [ 73.168304] Internal error: Oops: 8000000d [#1] SMP ARM [ 73.168429] Modules linked in: [ 73.168522] CPU: 0 PID: 536 Comm: sh Not tainted 5.15.0-rc6-00056-g3968ddcf05fb #3 [ 73.168675] Hardware name: Freescale i.MX6 Ultralite (Device Tree) [ 73.168791] PC is at imx_uart_console_setup+0x0/0x238 [ 73.168927] LR is at try_enable_new_console+0x98/0x124 [ 73.169056] pc : [<c154d928>] lr : [<c0196f44>] psr: a0000013 [ 73.169178] sp : c2ef5e70 ip : 00000000 fp : 00000000 [ 73.169281] r10: 00000000 r9 : c02cf970 r8 : 00000000 [ 73.169389] r7 : 00000001 r6 : 00000001 r5 : c1760164 r4 : c1e0fb08 [ 73.169512] r3 : c154d928 r2 : 00000000 r1 : efffcbd1 r0 : c1760164 [ 73.169641] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 73.169782] Control: 10c5387d Table: 8345406a DAC: 00000051 [ 73.169895] Register r0 information: non-slab/vmalloc memory [ 73.170032] Register r1 information: non-slab/vmalloc memory [ 73.170158] Register r2 information: NULL pointer [ 73.170273] Register r3 information: non-slab/vmalloc memory [ 73.170397] Register r4 information: non-slab/vmalloc memory [ 73.170521] Register r5 information: non-slab/vmalloc memory [ 73.170647] Register r6 information: non-paged memory [ 73.170771] Register r7 information: non-paged memory [ 73.170892] Register r8 information: NULL pointer [ 73.171009] Register r9 information: non-slab/vmalloc memory [ 73.171142] Register r10 information: NULL pointer [ 73.171259] Register r11 information: NULL pointer [ 73.171375] Register r12 information: NULL pointer [ 73.171494] Process sh (pid: 536, stack limit = 0xcd1ba82f) [ 73.171621] Stack: (0xc2ef5e70 to 0xc2ef6000) [ 73.171731] 5e60: ???????? ???????? ???????? ???????? [ 73.171899] 5e80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172059] 5ea0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172217] 5ec0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172377] 5ee0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172537] 5f00: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172698] 5f20: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172856] 5f40: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173016] 5f60: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173177] 5f80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173336] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173496] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173654] 5fe0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173826] [<c0196f44>] (try_enable_new_console) from [<c01984a8>] (register_console+0x10c/0x2ec) [ 73.174053] [<c01984a8>] (register_console) from [<c06e2c90>] (console_store+0x14c/0x168) [ 73.174262] [<c06e2c90>] (console_store) from [<c0383718>] (kernfs_fop_write_iter+0x110/0x1cc) [ 73.174470] [<c0383718>] (kernfs_fop_write_iter) from [<c02cf5f4>] (vfs_write+0x31c/0x548) [ 73.174679] [<c02cf5f4>] (vfs_write) from [<c02cf970>] (ksys_write+0x60/0xec) [ 73.174863] [<c02cf970>] (ksys_write) from [<c0100080>] (ret_fast_syscall+0x0/0x1c) [ 73.175052] Exception stack(0xc2ef5fa8 to 0xc2ef5ff0) [ 73.175167] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? [ 73.175327] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.175486] 5fe0: ???????? ???????? ???????? ???????? [ 73.175608] Code: 00000000 00000000 00000000 00000000 (00000000) [ 73.175744] ---[ end trace 9b75121265109bf1 ]--- A similar issue could be triggered by unbinding/binding the serial console device [*]. Drop __init so that imx_uart_setup_console() can be safely called at runtime. [*] https://lore.kernel.org/all/20181114174940.7865-3-stefan@agner.ch/ Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20211020192643.476895-2-francesco.dolcini@toradex.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6d0d1b5a1b4870911beb89544ec1a9751c42fec7 ]

If the device used as a serial console gets detached/attached at runtime,
register_console() will try to call imx_uart_setup_console(), but this
is not possible since it is marked as __init.

For instance

  # cat /sys/devices/virtual/tty/console/active
  tty1 ttymxc0
  # echo -n N > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console
  # echo -n Y > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console

[   73.166649] 8<--- cut here ---
[   73.167005] Unable to handle kernel paging request at virtual address c154d928
[   73.167601] pgd = 55433e84
[   73.167875] [c154d928] *pgd=8141941e(bad)
[   73.168304] Internal error: Oops: 8000000d [#1] SMP ARM
[   73.168429] Modules linked in:
[   73.168522] CPU: 0 PID: 536 Comm: sh Not tainted 5.15.0-rc6-00056-g3968ddcf05fb #3
[   73.168675] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[   73.168791] PC is at imx_uart_console_setup+0x0/0x238
[   73.168927] LR is at try_enable_new_console+0x98/0x124
[   73.169056] pc : [<c154d928>]    lr : [<c0196f44>]    psr: a0000013
[   73.169178] sp : c2ef5e70  ip : 00000000  fp : 00000000
[   73.169281] r10: 00000000  r9 : c02cf970  r8 : 00000000
[   73.169389] r7 : 00000001  r6 : 00000001  r5 : c1760164  r4 : c1e0fb08
[   73.169512] r3 : c154d928  r2 : 00000000  r1 : efffcbd1  r0 : c1760164
[   73.169641] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   73.169782] Control: 10c5387d  Table: 8345406a  DAC: 00000051
[   73.169895] Register r0 information: non-slab/vmalloc memory
[   73.170032] Register r1 information: non-slab/vmalloc memory
[   73.170158] Register r2 information: NULL pointer
[   73.170273] Register r3 information: non-slab/vmalloc memory
[   73.170397] Register r4 information: non-slab/vmalloc memory
[   73.170521] Register r5 information: non-slab/vmalloc memory
[   73.170647] Register r6 information: non-paged memory
[   73.170771] Register r7 information: non-paged memory
[   73.170892] Register r8 information: NULL pointer
[   73.171009] Register r9 information: non-slab/vmalloc memory
[   73.171142] Register r10 information: NULL pointer
[   73.171259] Register r11 information: NULL pointer
[   73.171375] Register r12 information: NULL pointer
[   73.171494] Process sh (pid: 536, stack limit = 0xcd1ba82f)
[   73.171621] Stack: (0xc2ef5e70 to 0xc2ef6000)
[   73.171731] 5e60:                                     ???????? ???????? ???????? ????????
[   73.171899] 5e80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.172059] 5ea0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.172217] 5ec0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.172377] 5ee0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.172537] 5f00: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.172698] 5f20: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.172856] 5f40: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.173016] 5f60: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.173177] 5f80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.173336] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.173496] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.173654] 5fe0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.173826] [<c0196f44>] (try_enable_new_console) from [<c01984a8>] (register_console+0x10c/0x2ec)
[   73.174053] [<c01984a8>] (register_console) from [<c06e2c90>] (console_store+0x14c/0x168)
[   73.174262] [<c06e2c90>] (console_store) from [<c0383718>] (kernfs_fop_write_iter+0x110/0x1cc)
[   73.174470] [<c0383718>] (kernfs_fop_write_iter) from [<c02cf5f4>] (vfs_write+0x31c/0x548)
[   73.174679] [<c02cf5f4>] (vfs_write) from [<c02cf970>] (ksys_write+0x60/0xec)
[   73.174863] [<c02cf970>] (ksys_write) from [<c0100080>] (ret_fast_syscall+0x0/0x1c)
[   73.175052] Exception stack(0xc2ef5fa8 to 0xc2ef5ff0)
[   73.175167] 5fa0:                   ???????? ???????? ???????? ???????? ???????? ????????
[   73.175327] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[   73.175486] 5fe0: ???????? ???????? ???????? ????????
[   73.175608] Code: 00000000 00000000 00000000 00000000 (00000000)
[   73.175744] ---[ end trace 9b75121265109bf1 ]---

A similar issue could be triggered by unbinding/binding the serial
console device [*].

Drop __init so that imx_uart_setup_console() can be safely called at
runtime.

[*] https://lore.kernel.org/all/20181114174940.7865-3-stefan@agner.ch/

Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20211020192643.476895-2-francesco.dolcini@toradex.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250_dw: Drop wrong use of ACPI_PTR() 2021-11-18T13:04:17+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2021-10-05T13:45:16+00:00 92a80e1ca20ea9f6099f967494cca0cb57b952a9 [ Upstream commit ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ] ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of adding ifdeffery here and there, drop ACPI_PTR(). Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support") Reported-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211005134516.23218-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ]

ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.

Instead of adding ifdeffery here and there, drop ACPI_PTR().

Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211005134516.23218-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250: fix racy uartclk update 2021-11-18T13:03:51+00:00 Johan Hovold johan@kernel.org 2021-10-15T11:14:20+00:00 edc546625456da4cc1968086b5a76143fbb0c75d commit 211cde4f5817dc88ef7f8f2fa286e57fbf14c8ee upstream. Commit 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method") added a hack to support SoCs where the UART reference clock can change behind the back of the driver but failed to add the proper locking. First, make sure to take a reference to the tty struct to avoid dereferencing a NULL pointer if the clock change races with a hangup. Second, the termios semaphore must be held during the update to prevent a racing termios change. Fixes: 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method") Fixes: c8dff3aa8241 ("serial: 8250: Skip uninitialized TTY port baud rate update") Cc: stable@vger.kernel.org # 5.9 Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Tested-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211015111422.1027-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 211cde4f5817dc88ef7f8f2fa286e57fbf14c8ee upstream.

Commit 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method")
added a hack to support SoCs where the UART reference clock can
change behind the back of the driver but failed to add the proper
locking.

First, make sure to take a reference to the tty struct to avoid
dereferencing a NULL pointer if the clock change races with a hangup.

Second, the termios semaphore must be held during the update to prevent
a racing termios change.

Fixes: 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method")
Fixes: c8dff3aa8241 ("serial: 8250: Skip uninitialized TTY port baud rate update")
Cc: stable@vger.kernel.org      # 5.9
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211015111422.1027-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: core: Fix initializing and restoring termios speed 2021-11-18T13:03:49+00:00 Pali Rohár pali@kernel.org 2021-10-02T13:09:00+00:00 47462c5e600fbaffd755cd13dedd80d04e41ff83 commit 027b57170bf8bb6999a28e4a5f3d78bf1db0f90c upstream. Since commit edc6afc54968 ("tty: switch to ktermios and new framework") termios speed is no longer stored only in c_cflag member but also in new additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag then termios speed is stored only in these new members. Therefore to correctly restore termios speed it is required to store also ispeed and ospeed members, not only cflag member. In case only cflag member with BOTHER flag is restored then functions tty_termios_baud_rate() and tty_termios_input_baud_rate() returns baudrate stored in c_ospeed / c_ispeed member, which is zero as it was not restored too. If reported baudrate is invalid (e.g. zero) then serial core functions report fallback baudrate value 9600. So it means that in this case original baudrate is lost and kernel changes it to value 9600. Simple reproducer of this issue is to boot kernel with following command line argument: "console=ttyXXX,86400" (where ttyXXX is the device name). For speed 86400 there is no Bnnn constant and therefore kernel has to represent this speed via BOTHER c_cflag. Which means that speed is stored only in c_ospeed and c_ispeed members, not in c_cflag anymore. If bootloader correctly configures serial device to speed 86400 then kernel prints boot log to early console at speed speed 86400 without any issue. But after kernel starts initializing real console device ttyXXX then speed is changed to fallback value 9600 because information about speed was lost. This patch fixes above issue by storing and restoring also ispeed and ospeed members, which are required for BOTHER flag. Fixes: edc6afc54968 ("[PATCH] tty: switch to ktermios and new framework") Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211002130900.9518-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 027b57170bf8bb6999a28e4a5f3d78bf1db0f90c upstream.

Since commit edc6afc54968 ("tty: switch to ktermios and new framework")
termios speed is no longer stored only in c_cflag member but also in new
additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag
then termios speed is stored only in these new members.

Therefore to correctly restore termios speed it is required to store also
ispeed and ospeed members, not only cflag member.

In case only cflag member with BOTHER flag is restored then functions
tty_termios_baud_rate() and tty_termios_input_baud_rate() returns baudrate
stored in c_ospeed / c_ispeed member, which is zero as it was not restored
too. If reported baudrate is invalid (e.g. zero) then serial core functions
report fallback baudrate value 9600. So it means that in this case original
baudrate is lost and kernel changes it to value 9600.

Simple reproducer of this issue is to boot kernel with following command
line argument: "console=ttyXXX,86400" (where ttyXXX is the device name).
For speed 86400 there is no Bnnn constant and therefore kernel has to
represent this speed via BOTHER c_cflag. Which means that speed is stored
only in c_ospeed and c_ispeed members, not in c_cflag anymore.

If bootloader correctly configures serial device to speed 86400 then kernel
prints boot log to early console at speed speed 86400 without any issue.
But after kernel starts initializing real console device ttyXXX then speed
is changed to fallback value 9600 because information about speed was lost.

This patch fixes above issue by storing and restoring also ispeed and
ospeed members, which are required for BOTHER flag.

Fixes: edc6afc54968 ("[PATCH] tty: switch to ktermios and new framework")
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211002130900.9518-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: Fix out-of-bound vmalloc access in imageblit 2021-10-06T13:55:45+00:00 Igor Matheus Andrade Torrente igormtorrente@gmail.com 2021-06-28T13:45:09+00:00 d570c48dd37dbe8fc6875d4461d01a9554ae2560 [ Upstream commit 3b0c406124719b625b1aba431659f5cdc24a982c ] This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will "fix and fill" the fb_var_screeninfo independently. Cc: stable <stable@vger.kernel.org> # after 5.15-rc2 is out, give it time to bake Reported-and-tested-by: syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com> Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3b0c406124719b625b1aba431659f5cdc24a982c ]

This issue happens when a userspace program does an ioctl
FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct
containing only the fields xres, yres, and bits_per_pixel
with values.

If this struct is the same as the previous ioctl, the
vc_resize() detects it and doesn't call the resize_screen(),
leaving the fb_var_screeninfo incomplete. And this leads to
the updatescrollmode() calculates a wrong value to
fbcon_display->vrows, which makes the real_y() return a
wrong value of y, and that value, eventually, causes
the imageblit to access an out-of-bound address value.

To solve this issue I made the resize_screen() be called
even if the screen does not need any resizing, so it will
"fix and fill" the fb_var_screeninfo independently.

Cc: stable <stable@vger.kernel.org> # after 5.15-rc2 is out, give it time to bake
Reported-and-tested-by: syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: synclink_gt: rename a conflicting function name 2021-09-30T08:11:03+00:00 Randy Dunlap rdunlap@infradead.org 2021-09-02T00:38:06+00:00 4ea4925c70fd55511e39cda5f3e9b47628435dfc [ Upstream commit 06e49073dfba24df4b1073a068631b13a0039c34 ] 'set_signals()' in synclink_gt.c conflicts with an exported symbol in arch/um/, so change set_signals() to set_gtsignals(). Keep the function names similar by also changing get_signals() to get_gtsignals(). ../drivers/tty/synclink_gt.c:442:13: error: conflicting types for ‘set_signals’ static void set_signals(struct slgt_info *info); ^~~~~~~~~~~ In file included from ../include/linux/irqflags.h:16:0, from ../include/linux/spinlock.h:58, from ../include/linux/mm_types.h:9, from ../include/linux/buildid.h:5, from ../include/linux/module.h:14, from ../drivers/tty/synclink_gt.c:46: ../arch/um/include/asm/irqflags.h:6:5: note: previous declaration of ‘set_signals’ was here int set_signals(int enable); ^~~~~~~~~~~ Fixes: 705b6c7b34f2 ("[PATCH] new driver synclink_gt") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210902003806.17054-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 06e49073dfba24df4b1073a068631b13a0039c34 ]

'set_signals()' in synclink_gt.c conflicts with an exported symbol
in arch/um/, so change set_signals() to set_gtsignals(). Keep
the function names similar by also changing get_signals() to
get_gtsignals().

../drivers/tty/synclink_gt.c:442:13: error: conflicting types for ‘set_signals’
 static void set_signals(struct slgt_info *info);
             ^~~~~~~~~~~
In file included from ../include/linux/irqflags.h:16:0,
                 from ../include/linux/spinlock.h:58,
                 from ../include/linux/mm_types.h:9,
                 from ../include/linux/buildid.h:5,
                 from ../include/linux/module.h:14,
                 from ../drivers/tty/synclink_gt.c:46:
../arch/um/include/asm/irqflags.h:6:5: note: previous declaration of ‘set_signals’ was here
 int set_signals(int enable);
     ^~~~~~~~~~~

Fixes: 705b6c7b34f2 ("[PATCH] new driver synclink_gt")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210902003806.17054-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: synclink_gt, drop unneeded forward declarations 2021-09-30T08:11:03+00:00 Jiri Slaby jslaby@suse.cz 2021-03-02T06:22:09+00:00 56a8f0b18f46fe505f5175f71135192f67561f05 [ Upstream commit b9b90fe655c0bd816847ac1bcbf179cfa2981ecb ] Forward declarations make the code larger and rewrites harder. Harder as they are often omitted from global changes. Remove forward declarations which are not really needed, i.e. the definition of the function is before its first use. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-39-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b9b90fe655c0bd816847ac1bcbf179cfa2981ecb ]

Forward declarations make the code larger and rewrites harder. Harder as
they are often omitted from global changes. Remove forward declarations
which are not really needed, i.e. the definition of the function is
before its first use.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210302062214.29627-39-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>