linux-stable.git/drivers/tty, branch v5.1.9

TTY: serial_core, add ->install

2019-06-11T10:19:23+00:00

commit 4cdd17ba1dff20ffc99fdbd2e6f0201fc7fe67df upstream.

We need to compute the uart state only on the first open. This is
usually what is done in the ->install hook. serial_core used to do this
in ->open on every open. So move it to ->install.

As a side effect, it ensures the state is set properly in the window
after tty_init_dev is called, but before uart_open. This fixes a bunch
of races between tty_open and flush_to_ldisc we were dealing with
recently.

One of such bugs was attempted to fix in commit fedb5760648a (serial:
fix race between flush_to_ldisc and tty_open), but it only took care of
a couple of functions (uart_start and uart_unthrottle).  I was able to
reproduce the crash on a SLE system, but in uart_write_room which is
also called from flush_to_ldisc via process_echoes. I was *unable* to
reproduce the bug locally. It is due to having this patch in my queue
since 2012!

 general protection fault: 0000 [#1] SMP KASAN PTI
 CPU: 1 PID: 5 Comm: kworker/u4:0 Tainted: G             L 4.12.14-396-default #1 SLE15-SP1 (unreleased)
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
 Workqueue: events_unbound flush_to_ldisc
 task: ffff8800427d8040 task.stack: ffff8800427f0000
 RIP: 0010:uart_write_room+0xc4/0x590
 RSP: 0018:ffff8800427f7088 EFLAGS: 00010202
 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: 000000000000002f RSI: 00000000000000ee RDI: ffff88003888bd90
 RBP: ffffffffb9545850 R08: 0000000000000001 R09: 0000000000000400
 R10: ffff8800427d825c R11: 000000000000006e R12: 1ffff100084fee12
 R13: ffffc900004c5000 R14: ffff88003888bb28 R15: 0000000000000178
 FS:  0000000000000000(0000) GS:ffff880043300000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000561da0794148 CR3: 000000000ebf4000 CR4: 00000000000006e0
 Call Trace:
  tty_write_room+0x6d/0xc0
  __process_echoes+0x55/0x870
  n_tty_receive_buf_common+0x105e/0x26d0
  tty_ldisc_receive_buf+0xb7/0x1c0
  tty_port_default_receive_buf+0x107/0x180
  flush_to_ldisc+0x35d/0x5c0
...

0 in rbx means tty->driver_data is NULL in uart_write_room. 0x178 is
tried to be dereferenced (0x178 >> 3 is 0x2f in rdx) at
uart_write_room+0xc4. 0x178 is exactly (struct uart_state *)NULL->refcount
used in uart_port_lock from uart_write_room.

So revert the upstream commit here as my local patch should fix the
whole family.

Signed-off-by: Jiri Slaby 
Cc: Li RongQing 
Cc: Wang Li 
Cc: Zhang Yu 
Cc: Greg Kroah-Hartman 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: disable DMA for uart_console

2019-06-09T07:16:15+00:00

commit 099506cbbc79c0bd52b19cb6b930f256dabc3950 upstream.

As noted in commit 84b40e3b57ee ("serial: 8250: omap: Disable DMA for
console UART"), UART console lines use low-level PIO only access functions
which will conflict with use of the line when DMA is enabled, e.g. when
the console line is also used for systemd messages. So disable DMA
support for UART console lines.

Reported-by: Michael Rodin 
Link: https://patchwork.kernel.org/patch/10929511/
Tested-by: Eugeniu Rosca 
Reviewed-by: Simon Horman 
Reviewed-by: Wolfram Sang 
Reviewed-by: Geert Uytterhoeven 
Cc: stable@vger.kernel.org
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

vt/fbcon: deinitialize resources in visual_init() after failed memory allocation

2019-06-09T07:16:15+00:00

commit a1ad1cc9704f64c169261a76e1aee1cf1ae51832 upstream.

After memory allocation failure vc_allocate() doesn't clean up data
which has been initialized in visual_init(). In case of fbcon this
leads to divide-by-0 in fbcon_init() on next open of the same tty.

memory allocation in vc_allocate() may fail here:
1097:     vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL);

on next open() fbcon_init() skips vc_font.data initialization:
1088:     if (!p->fontdata) {

division by zero in fbcon_init() happens here:
1149:     new_cols /= vc->vc_font.width;

Additional check is needed in fbcon_deinit() to prevent
usage of uninitialized vc_screenbuf:

1251:        if (vc->vc_hi_font_mask && vc->vc_screenbuf)
1252:                set_vc_hi_font(vc, false);

Crash:

 #6 [ffffc90001eafa60] divide_error at ffffffff81a00be4
    [exception RIP: fbcon_init+463]
    RIP: ffffffff814b860f  RSP: ffffc90001eafb18  RFLAGS: 00010246
...
 #7 [ffffc90001eafb60] visual_init at ffffffff8154c36e
 #8 [ffffc90001eafb80] vc_allocate at ffffffff8154f53c
 #9 [ffffc90001eafbc8] con_install at ffffffff8154f624
...

Signed-off-by: Grzegorz Halat 
Reviewed-by: Oleksandr Natalenko 
Acked-by: Bartlomiej Zolnierkiewicz 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty: max310x: Fix external crystal register setup

2019-06-09T07:16:13+00:00

commit 5d24f455c182d5116dd5db8e1dc501115ecc9c2c upstream.

The datasheet states:

  Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
(crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
clocking
  Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
oscillator. When using an external clock source at XIN, CrystalEn must
be set low.

The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.

This was required to make the MAX3107 with an external crystal on our
board able to send or receive data.

Signed-off-by: Joe Burmeister 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty: serial: msm_serial: Fix XON/XOFF

2019-06-09T07:16:13+00:00

commit 61c0e37950b88bad590056286c1d766b1f167f4e upstream.

When the tty layer requests the uart to throttle, the current code
executing in msm_serial will trigger "Bad mode in Error Handler" and
generate an invalid stack frame in pstore before rebooting (that is if
pstore is indeed configured: otherwise the user shall just notice a
reboot with no further information dumped to the console).

This patch replaces the PIO byte accessor with the word accessor
already used in PIO mode.

Fixes: 68252424a7c7 ("tty: serial: msm: Support big-endian CPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Jorge Ramirez-Ortiz 
Reviewed-by: Bjorn Andersson 
Reviewed-by: Stephen Boyd 
Signed-off-by: Greg Kroah-Hartman

tty: ipwireless: fix missing checks for ioremap

2019-05-31T13:43:47+00:00

[ Upstream commit 1bbb1c318cd8a3a39e8c3e2e83d5e90542d6c3e3 ]

ipw->attr_memory and ipw->common_memory are assigned with the
return value of ioremap. ioremap may fail, but no checks
are enforced. The fix inserts the checks to avoid potential
NULL pointer dereferences.

Signed-off-by: Kangjie Lu 
Reviewed-by: David Sterba 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: Don't force RISCV SBI console as preferred console

2019-05-22T05:39:55+00:00

commit f91253a3d005796404ae0e578b3394459b5f9b71 upstream.

The Linux kernel will auto-disables all boot consoles whenever it
gets a preferred real console.

Currently on RISC-V systems, if we have a real console which is not
RISCV SBI console then boot consoles (such as earlycon=sbi) are not
auto-disabled when a real console (ttyS0 or ttySIF0) is available.
This results in duplicate prints at boot-time after kernel starts
using real console (i.e. ttyS0 or ttySIF0) if "earlycon=" kernel
parameter was passed by bootloader.

The reason for above issue is that RISCV SBI console always adds
itself as preferred console which is causing other real consoles
to be not used as preferred console.

Ideally "console=" kernel parameter passed by bootloaders should
be the one selecting a preferred real console.

This patch fixes above issue by not forcing RISCV SBI console as
preferred console.

Fixes: afa6b1ccfad5 ("tty: New RISC-V SBI console driver")
Cc: stable@vger.kernel.org
Signed-off-by: Anup Patel 
Reviewed-by: Atish Patra 
Signed-off-by: Palmer Dabbelt 
Signed-off-by: Greg Kroah-Hartman

tty/vt: fix write/write race in ioctl(KDSKBSENT) handler

2019-05-22T05:39:52+00:00

commit 46ca3f735f345c9d87383dd3a09fa5d43870770e upstream.

The bug manifests as an attempt to access deallocated memory:

    BUG: unable to handle kernel paging request at ffff9c8735448000
    #PF error: [PROT] [WRITE]
    PGD 288a05067 P4D 288a05067 PUD 288a07067 PMD 7f60c2063 PTE 80000007f5448161
    Oops: 0003 [#1] PREEMPT SMP
    CPU: 6 PID: 388 Comm: loadkeys Tainted: G         C        5.0.0-rc6-00153-g5ded5871030e #91
    Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M-D3H, BIOS F12 11/14/2013
    RIP: 0010:__memmove+0x81/0x1a0
    Code: 4c 89 4f 10 4c 89 47 18 48 8d 7f 20 73 d4 48 83 c2 20 e9 a2 00 00 00 66 90 48 89 d1 4c 8b 5c 16 f8 4c 8d 54 17 f8 48 c1 e9 03  48 a5 4d 89 1a e9 0c 01 00 00 0f 1f 40 00 48 89 d1 4c 8b 1e 49
    RSP: 0018:ffffa1b9002d7d08 EFLAGS: 00010203
    RAX: ffff9c873541af43 RBX: ffff9c873541af43 RCX: 00000c6f105cd6bf
    RDX: 0000637882e986b6 RSI: ffff9c8735447ffb RDI: ffff9c8735447ffb
    RBP: ffff9c8739cd3800 R08: ffff9c873b802f00 R09: 00000000fffff73b
    R10: ffffffffb82b35f1 R11: 00505b1b004d5b1b R12: 0000000000000000
    R13: ffff9c873541af3d R14: 000000000000000b R15: 000000000000000c
    FS:  00007f450c390580(0000) GS:ffff9c873f180000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffff9c8735448000 CR3: 00000007e213c002 CR4: 00000000000606e0
    Call Trace:
     vt_do_kdgkb_ioctl+0x34d/0x440
     vt_ioctl+0xba3/0x1190
     ? __bpf_prog_run32+0x39/0x60
     ? mem_cgroup_commit_charge+0x7b/0x4e0
     tty_ioctl+0x23f/0x920
     ? preempt_count_sub+0x98/0xe0
     ? __seccomp_filter+0x67/0x600
     do_vfs_ioctl+0xa2/0x6a0
     ? syscall_trace_enter+0x192/0x2d0
     ksys_ioctl+0x3a/0x70
     __x64_sys_ioctl+0x16/0x20
     do_syscall_64+0x54/0xe0
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

The bug manifests on systemd systems with multiple vtcon devices:
  # cat /sys/devices/virtual/vtconsole/vtcon0/name
  (S) dummy device
  # cat /sys/devices/virtual/vtconsole/vtcon1/name
  (M) frame buffer device

There systemd runs 'loadkeys' tool in tapallel for each vtcon
instance. This causes two parallel ioctl(KDSKBSENT) calls to
race into adding the same entry into 'func_table' array at:

    drivers/tty/vt/keyboard.c:vt_do_kdgkb_ioctl()

The function has no locking around writes to 'func_table'.

The simplest reproducer is to have initrams with the following
init on a 8-CPU machine x86_64:

    #!/bin/sh

    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &

    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    loadkeys -q windowkeys ru4 &
    wait

The change adds lock on write path only. Reads are still racy.

CC: Greg Kroah-Hartman 
CC: Jiri Slaby 
Link: https://lkml.org/lkml/2019/2/17/256
Signed-off-by: Sergei Trofimovich 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

tty: vt.c: Fix TIOCL_BLANKSCREEN console blanking if blankinterval == 0

2019-05-22T05:39:52+00:00

commit 75ddbc1fb11efac87b611d48e9802f6fe2bb2163 upstream.

Previously, in the userspace, it was possible to use the "setterm" command
from util-linux to blank the VT console by default, using the following
command.

According to the man page,

> The force option keeps the screen blank even if a key is pressed.

It was implemented by calling TIOCL_BLANKSCREEN.

	case BLANKSCREEN:
		ioctlarg = TIOCL_BLANKSCREEN;
		if (ioctl(STDIN_FILENO, TIOCLINUX, &ioctlarg))
			warn(_("cannot force blank"));
		break;

However, after Linux 4.12, this command ceased to work anymore, which is
unexpected. By inspecting the kernel source, it shows that the issue was
triggered by the side-effect from commit a4199f5eb809 ("tty: Disable
default console blanking interval").

The console blanking is implemented by function do_blank_screen() in vt.c:
"blank_state" will be initialized to "blank_normal_wait" in con_init() if
AND ONLY IF ("blankinterval" > 0). If "blankinterval" is 0, "blank_state"
will be "blank_off" (== 0), and a call to do_blank_screen() will always
abort, even if a forced blanking is required from the user by calling
TIOCL_BLANKSCREEN, the console won't be blanked.

This behavior is unexpected from a user's point-of-view, since it's not
mentioned in any documentation. The setterm man page suggests it will
always work, and the kernel comments in uapi/linux/tiocl.h says

> /* keep screen blank even if a key is pressed */
> #define TIOCL_BLANKSCREEN 14

To fix it, we simply remove the "blank_state != blank_off" check, as
pointed out by Nicolas Pitre, this check doesn't logically make sense
and it's safe to remove.

Suggested-by: Nicolas Pitre 
Fixes: a4199f5eb809 ("tty: Disable default console blanking interval")
Signed-off-by: Yifeng Li 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

sc16is7xx: put err_spi and err_i2c into correct #ifdef

2019-04-19T12:09:23+00:00

err_spi is only called within SERIAL_SC16IS7XX_SPI
while err_i2c is called inside SERIAL_SC16IS7XX_I2C.
So we need to put err_spi and err_i2c into each #ifdef
accordingly.

This change fixes ("sc16is7xx: move label 'err_spi'
to correct section").

Signed-off-by: Guoqing Jiang 
Signed-off-by: Greg Kroah-Hartman