linux-stable.git/drivers/tty, branch v4.9.282 Linux kernel stable tree vt_kdsetmode: extend console locking 2021-09-03T07:44:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-08-30T15:55:18+00:00 755a2f40dda2d6b2e3b8624cb052e68947ee4d1f commit 2287a51ba822384834dafc1c798453375d1107c7 upstream. As per the long-suffering comment. Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2287a51ba822384834dafc1c798453375d1107c7 upstream.

As per the long-suffering comment.

Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: Mask out floating 16/32-bit bus bits 2021-08-15T11:01:03+00:00 Maciej W. Rozycki macro@orcam.me.uk 2021-06-26T04:11:05+00:00 3504317f369a5350c7eb82d9475a6308259ea055 commit e5227c51090e165db4b48dcaa300605bfced7014 upstream. Make sure only actual 8 bits of the IIR register are used in determining the port type in `autoconfig'. The `serial_in' port accessor returns the `unsigned int' type, meaning that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types more than 8 bits of data are returned, of which the high order bits will often come from bus lines that are left floating in the data phase. For example with the MIPS Malta board's CBUS UART, where the registers are aligned on 8-byte boundaries and which uses 32-bit accesses, data as follows is returned: YAMON> dump -32 0xbf000900 0x40 BF000900: 1F000942 1F000942 1F000900 1F000900 ...B...B........ BF000910: 1F000901 1F000901 1F000900 1F000900 ................ BF000920: 1F000900 1F000900 1F000960 1F000960 ...........`...` BF000930: 1F000900 1F000900 1F0009FF 1F0009FF ................ YAMON> Evidently high-order 24 bits return values previously driven in the address phase (the 3 highest order address bits used with the command above are masked out in the simple virtual address mapping used here and come out at zeros on the external bus), a common scenario with bus lines left floating, due to bus capacitance. Consequently when the value of IIR, mapped at 0x1f000910, is retrieved in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted by 6 and then assigned to 8-bit `scratch' variable, the value calculated is 0x27, not one of 0, 1, 2, 3 expected in port type determination. Fix the issue then, by assigning the value returned from `serial_in' to `scratch' first, which masks out 24 high-order bits retrieved, and only then right-shift the resulting 8-bit data quantity, producing the value of 3 in this case, as expected. Fix the same issue in `serial_dl_read'. The problem first appeared with Linux 2.6.9-rc3 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in `serial_in' was updated with this case: + case UPIO_MEM32: + return readl(up->port.membase + offset); + which made it produce results outside the unsigned 8-bit range for the first time, though obviously it is system dependent what actual values appear in the high order bits retrieved and it may well have been zeros in the relevant positions with the system the change originally was intended for. It is at that point that code in `autoconf' should have been updated accordingly, but clearly it was overlooked. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e5227c51090e165db4b48dcaa300605bfced7014 upstream.

Make sure only actual 8 bits of the IIR register are used in determining
the port type in `autoconfig'.

The `serial_in' port accessor returns the `unsigned int' type, meaning
that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types
more than 8 bits of data are returned, of which the high order bits will
often come from bus lines that are left floating in the data phase.  For
example with the MIPS Malta board's CBUS UART, where the registers are
aligned on 8-byte boundaries and which uses 32-bit accesses, data as
follows is returned:

YAMON> dump -32 0xbf000900 0x40

BF000900: 1F000942 1F000942 1F000900 1F000900  ...B...B........
BF000910: 1F000901 1F000901 1F000900 1F000900  ................
BF000920: 1F000900 1F000900 1F000960 1F000960  ...........`...`
BF000930: 1F000900 1F000900 1F0009FF 1F0009FF  ................

YAMON>

Evidently high-order 24 bits return values previously driven in the
address phase (the 3 highest order address bits used with the command
above are masked out in the simple virtual address mapping used here and
come out at zeros on the external bus), a common scenario with bus lines
left floating, due to bus capacitance.

Consequently when the value of IIR, mapped at 0x1f000910, is retrieved
in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted
by 6 and then assigned to 8-bit `scratch' variable, the value calculated
is 0x27, not one of 0, 1, 2, 3 expected in port type determination.

Fix the issue then, by assigning the value returned from `serial_in' to
`scratch' first, which masks out 24 high-order bits retrieved, and only
then right-shift the resulting 8-bit data quantity, producing the value
of 3 in this case, as expected.  Fix the same issue in `serial_dl_read'.

The problem first appeared with Linux 2.6.9-rc3 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in
`serial_in' was updated with this case:

+	case UPIO_MEM32:
+		return readl(up->port.membase + offset);
+

which made it produce results outside the unsigned 8-bit range for the
first time, though obviously it is system dependent what actual values
appear in the high order bits retrieved and it may well have been zeros
in the relevant positions with the system the change originally was
intended for.  It is at that point that code in `autoconf' should have
been updated accordingly, but clearly it was overlooked.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: 8250: serial_cs: Fix a memory leak in error handling path 2021-07-20T14:21:11+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2021-05-25T19:44:04+00:00 331f5923fce4f45b8170ccf06c529e8eb28f37bc [ Upstream commit fad92b11047a748c996ebd6cfb164a63814eeb2e ] In the probe function, if the final 'serial_config()' fails, 'info' is leaking. Add a resource handling path to free this memory. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/dc25f96b7faebf42e60fe8d02963c941cf4d8124.1621971720.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fad92b11047a748c996ebd6cfb164a63814eeb2e ]

In the probe function, if the final 'serial_config()' fails, 'info' is
leaking.

Add a resource handling path to free this memory.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/dc25f96b7faebf42e60fe8d02963c941cf4d8124.1621971720.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero 2021-07-20T14:21:11+00:00 Sherry Sun sherry.sun@nxp.com 2021-04-27T02:12:26+00:00 154dee4027a64becde30af3724335b9912ab6a9a [ Upstream commit fcb10ee27fb91b25b68d7745db9817ecea9f1038 ] We should be very careful about the register values that will be used for division or modulo operations, althrough the possibility that the UARTBAUD register value is zero is very low, but we had better to deal with the "bad data" of hardware in advance to avoid division or modulo by zero leading to undefined kernel behavior. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20210427021226.27468-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fcb10ee27fb91b25b68d7745db9817ecea9f1038 ]

We should be very careful about the register values that will be used
for division or modulo operations, althrough the possibility that the
UARTBAUD register value is zero is very low, but we had better to deal
with the "bad data" of hardware in advance to avoid division or modulo
by zero leading to undefined kernel behavior.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20210427021226.27468-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: nozomi: Fix the error handling path of 'nozomi_card_init()' 2021-07-20T14:21:04+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2021-05-25T18:51:57+00:00 00e453af94ccca3dbdbdacc6280dc3e6ad03f93e [ Upstream commit 6ae7d0f5a92b9619f6e3c307ce56b2cefff3f0e9 ] The error handling path is broken and we may un-register things that have never been registered. Update the loops index accordingly. Fixes: 9842c38e9176 ("kfifo: fix warn_unused_result") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/e28c2e92c7475da25b03d022ea2d6dcf1ba807a2.1621968629.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6ae7d0f5a92b9619f6e3c307ce56b2cefff3f0e9 ]

The error handling path is broken and we may un-register things that have
never been registered.

Update the loops index accordingly.

Fixes: 9842c38e9176 ("kfifo: fix warn_unused_result")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e28c2e92c7475da25b03d022ea2d6dcf1ba807a2.1621968629.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: nozomi: Fix a resource leak in an error handling function 2021-07-20T14:21:03+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2021-05-09T17:22:33+00:00 157fec4acc1baaeec92470b471ab8d30e568ade1 [ Upstream commit 31a9a318255960d32ae183e95d0999daf2418608 ] A 'request_irq()' call is not balanced by a corresponding 'free_irq()' in the error handling path, as already done in the remove function. Add it. Fixes: 9842c38e9176 ("kfifo: fix warn_unused_result") Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/4f0d2b3038e82f081d370ccb0cade3ad88463fe7.1620580838.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 31a9a318255960d32ae183e95d0999daf2418608 ]

A 'request_irq()' call is not balanced by a corresponding 'free_irq()' in
the error handling path, as already done in the remove function.

Add it.

Fixes: 9842c38e9176 ("kfifo: fix warn_unused_result")
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4f0d2b3038e82f081d370ccb0cade3ad88463fe7.1620580838.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial_cs: remove wrong GLOBETROTTER.cis entry 2021-07-20T14:20:57+00:00 Ondrej Zary linux@zary.sk 2021-06-11T20:19:39+00:00 5069d075b8c4243ef58b51aaa3c09ead52d653db commit 11b1d881a90fc184cc7d06e9804eb288c24a2a0d upstream. The GLOBETROTTER.cis entry in serial_cs matches more devices than intended and breaks them. Remove it. Example: # pccardctl info PRODID_1="Option International " PRODID_2="GSM-Ready 56K/ISDN " PRODID_3="021 " PRODID_4="A " MANFID=0013,0000 FUNCID=0 result: pcmcia 0.0: Direct firmware load for cis/GLOBETROTTER.cis failed with error -2 The GLOBETROTTER.cis is nowhere to be found. There's GLOBETROTTER.cis.ihex at https://netdev.vger.kernel.narkive.com/h4inqdxM/patch-axnet-cs-fix-phy-id-detection-for-bogus-asix-chip#post41 It's from completely diffetent card: vers_1 4.1, "Option International", "GSM/GPRS GlobeTrotter", "001", "A" Signed-off-by: Ondrej Zary <linux@zary.sk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210611201940.23898-1-linux@zary.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 11b1d881a90fc184cc7d06e9804eb288c24a2a0d upstream.

The GLOBETROTTER.cis entry in serial_cs matches more devices than
intended and breaks them. Remove it.

Example: # pccardctl info
PRODID_1="Option International
"
PRODID_2="GSM-Ready 56K/ISDN
"
PRODID_3="021
"
PRODID_4="A
"
MANFID=0013,0000
FUNCID=0

result:
pcmcia 0.0: Direct firmware load for cis/GLOBETROTTER.cis failed with error -2

The GLOBETROTTER.cis is nowhere to be found. There's GLOBETROTTER.cis.ihex at
https://netdev.vger.kernel.narkive.com/h4inqdxM/patch-axnet-cs-fix-phy-id-detection-for-bogus-asix-chip#post41
It's from completely diffetent card:
vers_1 4.1, "Option International", "GSM/GPRS GlobeTrotter", "001", "A"

Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210611201940.23898-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial_cs: Add Option International GSM-Ready 56K/ISDN modem 2021-07-20T14:20:57+00:00 Ondrej Zary linux@zary.sk 2021-06-11T20:19:40+00:00 46f0339b74c4b5bf3d2bff4574192d58a9d4ac2b commit d495dd743d5ecd47288156e25c4d9163294a0992 upstream. Add support for Option International GSM-Ready 56K/ISDN PCMCIA modem card. Signed-off-by: Ondrej Zary <linux@zary.sk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210611201940.23898-2-linux@zary.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d495dd743d5ecd47288156e25c4d9163294a0992 upstream.

Add support for Option International GSM-Ready 56K/ISDN PCMCIA modem
card.

Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210611201940.23898-2-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: sh-sci: Stop dmaengine transfer in sci_stop_tx() 2021-07-20T14:20:57+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2021-06-10T11:08:06+00:00 768d6db02336fcf9573923fcb7f1cf70405c6e55 commit 08a84410a04f05c7c1b8e833f552416d8eb9f6fe upstream. Stop dmaengine transfer in sci_stop_tx(). Otherwise, the following message is possible output when system enters suspend and while transferring data, because clearing TIE bit in SCSCR is not able to stop any dmaengine transfer. sh-sci e6550000.serial: ttySC1: Unable to drain transmitter Note that this driver has already used some #ifdef in the .c file so that this patch also uses #ifdef to fix the issue. Otherwise, build errors happens if the CONFIG_SERIAL_SH_SCI_DMA is disabled. Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.") Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210610110806.277932-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 08a84410a04f05c7c1b8e833f552416d8eb9f6fe upstream.

Stop dmaengine transfer in sci_stop_tx(). Otherwise, the following
message is possible output when system enters suspend and while
transferring data, because clearing TIE bit in SCSCR is not able to
stop any dmaengine transfer.

    sh-sci e6550000.serial: ttySC1: Unable to drain transmitter

Note that this driver has already used some #ifdef in the .c file
so that this patch also uses #ifdef to fix the issue. Otherwise,
build errors happens if the CONFIG_SERIAL_SH_SCI_DMA is disabled.

Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210610110806.277932-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: max310x: unregister uart driver in case of failure and abort 2021-06-03T06:23:31+00:00 Atul Gopinathan atulgopinathan@gmail.com 2021-05-03T11:56:38+00:00 27d75d2e636f26ab027f728d538430f608c66b7c [ Upstream commit 3890e3dea315f1a257d1b940a2a4e2fa16a7b095 ] The macro "spi_register_driver" invokes the function "__spi_register_driver()" which has a return type of int and can fail, returning a negative value in such a case. This is currently ignored and the init() function yields success even if the spi driver failed to register. Fix this by collecting the return value of "__spi_register_driver()" and also unregister the uart driver in case of failure. Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com> Link: https://lore.kernel.org/r/20210503115736.2104747-12-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3890e3dea315f1a257d1b940a2a4e2fa16a7b095 ]

The macro "spi_register_driver" invokes the function
"__spi_register_driver()" which has a return type of int and can fail,
returning a negative value in such a case. This is currently ignored and
the init() function yields success even if the spi driver failed to
register.

Fix this by collecting the return value of "__spi_register_driver()" and
also unregister the uart driver in case of failure.

Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>