linux-stable.git/drivers/tty, branch v4.9.162

serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling

2019-03-05T16:57:05+00:00

[ Upstream commit 815d835b7ba46685c316b000013367dacb2b461b ]

Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4.

Signed-off-by: Tomonori Sakita 
Signed-off-by: Atsushi Nemoto 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: fix race between flush_to_ldisc and tty_open

2019-02-12T18:45:02+00:00

commit fedb5760648a291e949f2380d383b5b2d2749b5e upstream.

There still is a race window after the commit b027e2298bd588
("tty: fix data race between tty_init_dev and flush of buf"),
and we encountered this crash issue if receive_buf call comes
before tty initialization completes in tty_open and
tty->driver_data may be NULL.

CPU0                                    CPU1
----                                    ----
                                  tty_open
                                   tty_init_dev
                                     tty_ldisc_unlock
                                       schedule
flush_to_ldisc
 receive_buf
  tty_port_default_receive_buf
   tty_ldisc_receive_buf
    n_tty_receive_buf_common
      __receive_buf
       uart_flush_chars
        uart_start
        /*tty->driver_data is NULL*/
                                   tty->ops->open
                                   /*init tty->driver_data*/

it can be fixed by extending ldisc semaphore lock in tty_init_dev
to driver_data initialized completely after tty->ops->open(), but
this will lead to get lock on one function and unlock in some other
function, and hard to maintain, so fix this race only by checking
tty->driver_data when receiving, and return if tty->driver_data
is NULL, and n_tty_receive_buf_common maybe calls uart_unthrottle,
so add the same check.

Because the tty layer knows nothing about the driver associated with the
device, the tty layer can not do anything here, it is up to the tty
driver itself to check for this type of race.  Fix up the serial driver
to correctly check to see if it is finished binding with the device when
being called, and if not, abort the tty calls.

[Description and problem report and testing from Li RongQing, I rewrote
the patch to be in the serial layer, not in the tty core - gregkh]

Reported-by: Li RongQing 
Tested-by: Li RongQing 
Signed-off-by: Wang Li 
Signed-off-by: Zhang Yu 
Signed-off-by: Li RongQing 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty: serial: samsung: Properly set flags in autoCTS mode

2019-02-12T18:44:55+00:00

[ Upstream commit 31e933645742ee6719d37573a27cce0761dcf92b ]

Commit 391f93f2ec9f ("serial: core: Rework hw-assited flow control support")
has changed the way the autoCTS mode is handled.

According to that change, serial drivers which enable H/W autoCTS mode must
set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling
TX. This patch adds proper handling of UPSTAT_AUTOCTS flag.

Signed-off-by: Beomho Seo 
[mszyprow: rephrased commit message]
Signed-off-by: Marek Szyprowski 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: fsl_lpuart: clear parity enable bit when disable parity

2019-02-12T18:44:51+00:00

[ Upstream commit 397bd9211fe014b347ca8f95a8f4e1017bac1aeb ]

Current driver only enable parity enable bit and never clear it
when user set the termios. The fix clear the parity enable bit when
PARENB flag is not set in termios->c_cflag.

Cc: Lukas Wunner 
Signed-off-by: Andy Duan 
Reviewed-by: Fabio Estevam 
Acked-by: Uwe Kleine-König 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

vt: invoke notifier on screen size change

2019-01-31T07:12:36+00:00

commit 0c9b1965faddad7534b6974b5b36c4ad37998f8e upstream.

User space using poll() on /dev/vcs devices are not awaken when a
screen size change occurs. Let's fix that.

Signed-off-by: Nicolas Pitre 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty/n_hdlc: fix __might_sleep warning

2019-01-31T07:12:35+00:00

commit fc01d8c61ce02c034e67378cd3e645734bc18c8c upstream.

Fix __might_sleep warning[1] in tty/n_hdlc.c read due to copy_to_user
call while current is TASK_INTERRUPTIBLE.  This is a false positive
since the code path does not depend on current state remaining
TASK_INTERRUPTIBLE.  The loop breaks out and sets TASK_RUNNING after
calling copy_to_user.

This patch supresses the warning by setting TASK_RUNNING before calling
copy_to_user.

[1] https://syzkaller.appspot.com/bug?id=17d5de7f1fcab794cb8c40032f893f52de899324

Signed-off-by: Paul Fulghum 
Reported-by: syzbot 
Cc: Tetsuo Handa 
Cc: Alan Cox 
Cc: stable 
Acked-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

uart: Fix crash in uart_write and uart_put_char

2019-01-31T07:12:35+00:00

commit aff9cf5955185d1f183227e46c5f8673fa483813 upstream.

We were experiencing a crash similar to the one reported as part of
commit:a5ba1d95e46e ("uart: fix race between uart_put_char() and
uart_shutdown()") in our testbed as well. We continue to observe the same
crash after integrating the commit a5ba1d95e46e ("uart: fix race between
uart_put_char() and uart_shutdown()")

On reviewing the change, the port lock should be taken prior to checking for
if (!circ->buf) in fn. __uart_put_char and other fns. that update the buffer
uart_state->xmit.

Traceback:

[11/27/2018 06:24:32.4870] Unable to handle kernel NULL pointer dereference
                           at virtual address 0000003b

[11/27/2018 06:24:32.4950] PC is at memcpy+0x48/0x180
[11/27/2018 06:24:32.4950] LR is at uart_write+0x74/0x120
[11/27/2018 06:24:32.4950] pc : []
                           lr : [] pstate: 000001c5
[11/27/2018 06:24:32.4950] sp : ffffffc076433d30
[11/27/2018 06:24:32.4950] x29: ffffffc076433d30 x28: 0000000000000140
[11/27/2018 06:24:32.4950] x27: ffffffc0009b9d5e x26: ffffffc07ce36580
[11/27/2018 06:24:32.4950] x25: 0000000000000000 x24: 0000000000000140
[11/27/2018 06:24:32.4950] x23: ffffffc000891200 x22: ffffffc01fc34000
[11/27/2018 06:24:32.4950] x21: 0000000000000fff x20: 0000000000000076
[11/27/2018 06:24:32.4950] x19: 0000000000000076 x18: 0000000000000000
[11/27/2018 06:24:32.4950] x17: 000000000047cf08 x16: ffffffc000099e68
[11/27/2018 06:24:32.4950] x15: 0000000000000018 x14: 776d726966205948
[11/27/2018 06:24:32.4950] x13: 50203a6c6974755f x12: 74647075205d3333
[11/27/2018 06:24:32.4950] x11: 3a35323a36203831 x10: 30322f37322f3131
[11/27/2018 06:24:32.4950] x9 : 5b205d303638342e x8 : 746164206f742070
[11/27/2018 06:24:32.4950] x7 : 7520736920657261 x6 : 000000000000003b
[11/27/2018 06:24:32.4950] x5 : 000000000000817a x4 : 0000000000000008
[11/27/2018 06:24:32.4950] x3 : 2f37322f31312a5b x2 : 000000000000006e
[11/27/2018 06:24:32.4950] x1 : ffffffc0009b9cf0 x0 : 000000000000003b

[11/27/2018 06:24:32.4950] CPU2: stopping
[11/27/2018 06:24:32.4950] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P      D    O    4.1.51 #3
[11/27/2018 06:24:32.4950] Hardware name: Broadcom-v8A (DT)
[11/27/2018 06:24:32.4950] Call trace:
[11/27/2018 06:24:32.4950] [] dump_backtrace+0x0/0x150
[11/27/2018 06:24:32.4950] [] show_stack+0x14/0x20
[11/27/2018 06:24:32.4950] [] dump_stack+0x90/0xb0
[11/27/2018 06:24:32.4950] [] handle_IPI+0x18c/0x1a0
[11/27/2018 06:24:32.4950] [] gic_handle_irq+0x88/0x90

Fixes: a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()")
Cc: stable 
Signed-off-by: Samir Virmani 
Acked-by: Tycho Andersen 
Signed-off-by: Greg Kroah-Hartman

tty: Handle problem if line discipline does not have receive_buf

2019-01-31T07:12:35+00:00

commit 27cfb3a53be46a54ec5e0bd04e51995b74c90343 upstream.

Some tty line disciplines do not have a receive buf callback, so
properly check for that before calling it.  If they do not have this
callback, just eat the character quietly, as we can't fail this call.

Reported-by: Jann Horn 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty/serial: do not free trasnmit buffer page under port lock

2019-01-26T08:38:34+00:00

[ Upstream commit d72402145ace0697a6a9e8e75a3de5bf3375f78d ]

LKP has hit yet another circular locking dependency between uart
console drivers and debugobjects [1]:

     CPU0                                    CPU1

                                            rhltable_init()
                                             __init_work()
                                              debug_object_init
     uart_shutdown()                          /* db->lock */
      /* uart_port->lock */                    debug_print_object()
       free_page()                              printk()
                                                 call_console_drivers()
        debug_check_no_obj_freed()                /* uart_port->lock */
         /* db->lock */
          debug_print_object()

So there are two dependency chains:
	uart_port->lock -> db->lock
And
	db->lock -> uart_port->lock

This particular circular locking dependency can be addressed in several
ways:

a) One way would be to move debug_print_object() out of db->lock scope
   and, thus, break the db->lock -> uart_port->lock chain.
b) Another one would be to free() transmit buffer page out of db->lock
   in UART code; which is what this patch does.

It makes sense to apply a) and b) independently: there are too many things
going on behind free(), none of which depend on uart_port->lock.

The patch fixes transmit buffer page free() in uart_shutdown() and,
additionally, in uart_port_startup() (as was suggested by Dmitry Safonov).

[1] https://lore.kernel.org/lkml/20181211091154.GL23332@shao2-debian/T/#u
Signed-off-by: Sergey Senozhatsky 
Reviewed-by: Petr Mladek 
Acked-by: Peter Zijlstra (Intel) 
Cc: Greg Kroah-Hartman 
Cc: Jiri Slaby 
Cc: Andrew Morton 
Cc: Waiman Long 
Cc: Dmitry Safonov 
Cc: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: set suppress_bind_attrs flag only if builtin

2019-01-26T08:38:32+00:00

[ Upstream commit 646097940ad35aa2c1f2012af932d55976a9f255 ]

When the test 'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled,
arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init).
devtmpfs gets killed because we try to remove a file and decrement the
wb reference count before the noop_backing_device_info gets initialized.

[    0.332075] Serial: AMBA PL011 UART driver
[    0.485276] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1
[    0.502382] console [ttyAMA0] enabled
[    0.515710] Unable to handle kernel paging request at virtual address 0000800074c12000
[    0.516053] Mem abort info:
[    0.516222]   ESR = 0x96000004
[    0.516417]   Exception class = DABT (current EL), IL = 32 bits
[    0.516641]   SET = 0, FnV = 0
[    0.516826]   EA = 0, S1PTW = 0
[    0.516984] Data abort info:
[    0.517149]   ISV = 0, ISS = 0x00000004
[    0.517339]   CM = 0, WnR = 0
[    0.517553] [0000800074c12000] user address but active_mm is swapper
[    0.517928] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    0.518305] Modules linked in:
[    0.518839] CPU: 0 PID: 13 Comm: kdevtmpfs Not tainted 4.19.0-rc5-next-20180928-00002-g2ba39ab0cd01-dirty #82
[    0.519307] Hardware name: linux,dummy-virt (DT)
[    0.519681] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    0.519959] pc : __destroy_inode+0x94/0x2a8
[    0.520212] lr : __destroy_inode+0x78/0x2a8
[    0.520401] sp : ffff0000098c3b20
[    0.520590] x29: ffff0000098c3b20 x28: 00000000087a3714
[    0.520904] x27: 0000000000002000 x26: 0000000000002000
[    0.521179] x25: ffff000009583000 x24: 0000000000000000
[    0.521467] x23: ffff80007bb52000 x22: ffff80007bbaa7c0
[    0.521737] x21: ffff0000093f9338 x20: 0000000000000000
[    0.522033] x19: ffff80007bbb05d8 x18: 0000000000000400
[    0.522376] x17: 0000000000000000 x16: 0000000000000000
[    0.522727] x15: 0000000000000400 x14: 0000000000000400
[    0.523068] x13: 0000000000000001 x12: 0000000000000001
[    0.523421] x11: 0000000000000000 x10: 0000000000000970
[    0.523749] x9 : ffff0000098c3a60 x8 : ffff80007bbab190
[    0.524017] x7 : ffff80007bbaa880 x6 : 0000000000000c88
[    0.524305] x5 : ffff0000093d96c8 x4 : 61c8864680b583eb
[    0.524567] x3 : ffff0000093d6180 x2 : ffffffffffffffff
[    0.524872] x1 : 0000800074c12000 x0 : 0000800074c12000
[    0.525207] Process kdevtmpfs (pid: 13, stack limit = 0x(____ptrval____))
[    0.525529] Call trace:
[    0.525806]  __destroy_inode+0x94/0x2a8
[    0.526108]  destroy_inode+0x34/0x88
[    0.526370]  evict+0x144/0x1c8
[    0.526636]  iput+0x184/0x230
[    0.526871]  dentry_unlink_inode+0x118/0x130
[    0.527152]  d_delete+0xd8/0xe0
[    0.527420]  vfs_unlink+0x240/0x270
[    0.527665]  handle_remove+0x1d8/0x330
[    0.527875]  devtmpfsd+0x138/0x1c8
[    0.528085]  kthread+0x14c/0x158
[    0.528291]  ret_from_fork+0x10/0x18
[    0.528720] Code: 92800002 aa1403e0 d538d081 8b010000 (c85f7c04)
[    0.529367] ---[ end trace 5a3dee47727f877c ]---

Rework to set suppress_bind_attrs flag to avoid removing the device when
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y. This applies for pic32_uart and
xilinx_uartps as well.

Co-developed-by: Arnd Bergmann 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Anders Roxell 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin