linux-stable.git/drivers/tty, branch v4.9.103

serial: 8250: Don't service RX FIFO if interrupts are disabled

2018-05-25T14:13:15+00:00

[ Upstream commit 2e9fe539108320820016f78ca7704a7342788380 ]

Currently, data in RX FIFO is read based on UART_LSR register state even
if RDI and RLSI interrupts are disabled in UART_IER register.
This is because when IRQ handler is called due to TX FIFO empty event,
RX FIFO is serviced based on UART_LSR register status instead of
UART_IIR status. This defeats the purpose of disabling UART RX
FIFO interrupts during throttling(see, omap_8250_throttle()) as IRQ
handler continues to drain UART RX FIFO resulting in overflow of buffer
at tty layer.
Fix this by making sure that driver drains UART RX FIFO only when
UART_IIR_RDI is set along with UART_LSR_BI or UART_LSR_DR bits.

Signed-off-by: Vignesh R 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

serial: arc_uart: Fix out-of-bounds access through DT alias

2018-05-25T14:13:14+00:00

[ Upstream commit f9f5786987e81d166c60833edcb7d1836aa16944 ]

The arc_uart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a
legitimate DTB.

Fixes: ea28fd56fcde69af ("serial/arc-uart: switch to devicetree based probing")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

serial: fsl_lpuart: Fix out-of-bounds access through DT alias

2018-05-25T14:13:14+00:00

[ Upstream commit ffab87fdecc655cc676f8be8dd1a2c5e22bd6d47 ]

The lpuart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Fixes: c9e2e946fb0ba5d2 ("tty: serial: add Freescale lpuart driver support")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

serial: imx: Fix out-of-bounds access through serial port index

2018-05-25T14:13:14+00:00

[ Upstream commit 5673444821406dda5fc25e4b52aca419f8065a19 ]

The imx_ports[] array is indexed using a value derived from the
"serialN" alias in DT, or from platform data, which may lead to an
out-of-bounds access.

Fix this by adding a range check.

Fixes: ff05967a07225ab6 ("serial/imx: add of_alias_get_id() reference back")
Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Uwe Kleine-König 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

serial: mxs-auart: Fix out-of-bounds access through serial port index

2018-05-25T14:13:14+00:00

[ Upstream commit dd345a31bfdec350d2593e6de5964e55c7f19c76 ]

The auart_port[] array is indexed using a value derived from the
"serialN" alias in DT, or from platform data, which may lead to an
out-of-bounds access.

Fix this by adding a range check.

Fixes: 1ea6607d4cdc9179 ("serial: mxs-auart: Allow device tree probing")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

serial: samsung: Fix out-of-bounds access through serial port index

2018-05-25T14:13:14+00:00

[ Upstream commit 49ee23b71877831ac087d6083f6f397dc19c9664 ]

The s3c24xx_serial_ports[] array is indexed using a value derived from
the "serialN" alias in DT, or from an incrementing probe index, which
may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_SAMSUNG_UARTS), so this can even be triggered using
a legitimate DTB or legitimate board code.

Fixes: 13a9f6c64fdc55eb ("serial: samsung: Consider DT alias when probing ports")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

serial: xuartps: Fix out-of-bounds access through DT alias

2018-05-25T14:13:13+00:00

[ Upstream commit e7d75e18d0fc3f7193b65282b651f980c778d935 ]

The cdns_uart_port[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Fixes: 928e9263492069ee ("tty: xuartps: Initialize ports according to aliases")
Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Michal Simek 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

serial: sccnxp: Fix error handling in sccnxp_probe()

2018-05-19T08:27:00+00:00

commit c91261437985d481c472639d4397931d77f5d4e9 upstream.

sccnxp_probe() returns result of regulator_disable() that may lead
to returning zero, while device is not properly initialized.
Also the driver enables clocks, but it does not disable it.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

serial: imx: ensure UCR3 and UFCR are setup correctly

2018-05-09T07:50:19+00:00

commit 6df765dca378bddf994cfd2044acafa501bd800f upstream.

Commit e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and
RI irqs to be off") has a flaw: While UCR3 and UFCR were modified using
read-modify-write before it switched to write register values
independent of the previous state. That's a good idea in principle (and
that's why I did it) but needs more care.

This patch reinstates read-modify-write for UFCR and for UCR3 ensures
that RXDMUXSEL and ADNIMP are set for post imx1.

Fixes: e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off")
Signed-off-by: Uwe Kleine-König 
Acked-by: Mika Penttilä 
Tested-by: Mika Penttilä 
Acked-by: Steve Twiss 
Tested-by: Steve Twiss 
Cc: Chris Ruehl 
Signed-off-by: Greg Kroah-Hartman

earlycon: Use a pointer table to fix __earlycon_table stride

2018-05-01T22:13:09+00:00

commit dd709e72cb934eefd44de8d9969097173fbf45dc upstream.

Commit 99492c39f39f ("earlycon: Fix __earlycon_table stride") tried to fix
__earlycon_table stride by forcing the earlycon_id struct alignment to 32
and asking the linker to 32-byte align the __earlycon_table symbol.  This
fix was based on commit 07fca0e57fca92 ("tracing: Properly align linker
defined symbols") which tried a similar fix for the tracing subsystem.

However, this fix doesn't quite work because there is no guarantee that
gcc will place structures packed into an array format.  In fact, gcc 4.9
chooses to 64-byte align these structs by inserting additional padding
between the entries because it has no clue that they are supposed to be in
an array.  If we are unlucky, the linker will assign symbol
"__earlycon_table" to a 32-byte aligned address which does not correspond
to the 64-byte aligned contents of section "__earlycon_table".

To address this same problem, the fix to the tracing system was
subsequently re-implemented using a more robust table of pointers approach
by commits:
 3d56e331b653 ("tracing: Replace syscall_meta_data struct array with pointer array")
 654986462939 ("tracepoints: Fix section alignment using pointer array")
 e4a9ea5ee7c8 ("tracing: Replace trace_event struct array with pointer array")

Let's use this same "array of pointers to structs" approach for
EARLYCON_TABLE.

Fixes: 99492c39f39f ("earlycon: Fix __earlycon_table stride")
Signed-off-by: Daniel Kurtz 
Suggested-by: Aaron Durbin 
Reviewed-by: Rob Herring 
Tested-by: Guenter Roeck 
Reviewed-by: Guenter Roeck 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman