linux-stable.git/drivers/tty, branch v4.4.248

tty: Fix ->session locking

2020-12-11T12:36:45+00:00

commit c8bcd9c5be24fb9e6132e97da5a35e55a83e36b9 upstream.

Currently, locking of ->session is very inconsistent; most places
protect it using the legacy tty mutex, but disassociate_ctty(),
__do_SAK(), tiocspgrp() and tiocgsid() don't.
Two of the writers hold the ctrl_lock (because they already need it for
->pgrp), but __proc_set_tty() doesn't do that yet.

On a PREEMPT=y system, an unprivileged user can theoretically abuse
this broken locking to read 4 bytes of freed memory via TIOCGSID if
tiocgsid() is preempted long enough at the right point. (Other things
might also go wrong, especially if root-only ioctls are involved; I'm
not sure about that.)

Change the locking on ->session such that:

 - tty_lock() is held by all writers: By making disassociate_ctty()
   hold it. This should be fine because the same lock can already be
   taken through the call to tty_vhangup_session().
   The tricky part is that we need to shorten the area covered by
   siglock to be able to take tty_lock() without ugly retry logic; as
   far as I can tell, this should be fine, since nothing in the
   signal_struct is touched in the `if (tty)` branch.
 - ctrl_lock is held by all writers: By changing __proc_set_tty() to
   hold the lock a little longer.
 - All readers that aren't holding tty_lock() hold ctrl_lock: By
   adding locking to tiocgsid() and __do_SAK(), and expanding the area
   covered by ctrl_lock in tiocspgrp().

Cc: stable@kernel.org
Signed-off-by: Jann Horn 
Reviewed-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

tty: Fix ->pgrp locking in tiocspgrp()

2020-12-11T12:36:44+00:00

commit 54ffccbf053b5b6ca4f6e45094b942fab92a25fc upstream.

tiocspgrp() takes two tty_struct pointers: One to the tty that userspace
passed to ioctl() (`tty`) and one to the TTY being changed (`real_tty`).
These pointers are different when ioctl() is called with a master fd.

To properly lock real_tty->pgrp, we must take real_tty->ctrl_lock.

This bug makes it possible for racing ioctl(TIOCSPGRP, ...) calls on
both sides of a PTY pair to corrupt the refcount of `struct pid`,
leading to use-after-free errors.

Fixes: 47f86834bbd4 ("redo locking of tty->pgrp")
CC: stable@kernel.org
Signed-off-by: Jann Horn 
Reviewed-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

tty: serial: imx: keep console clocks always on

2020-11-24T11:48:12+00:00

commit e67c139c488e84e7eae6c333231e791f0e89b3fb upstream.

For below code, there has chance to cause deadlock in SMP system:
Thread 1:
clk_enable_lock();
pr_info("debug message");
clk_enable_unlock();

Thread 2:
imx_uart_console_write()
	clk_enable()
		clk_enable_lock();

Thread 1:
Acuired clk enable_lock -> printk -> console_trylock_spinning
Thread 2:
console_unlock() -> imx_uart_console_write -> clk_disable -> Acquite clk enable_lock

So the patch is to keep console port clocks always on like
other console drivers.

Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check")
Acked-by: Uwe Kleine-König 
Signed-off-by: Fugang Duan 
Link: https://lore.kernel.org/r/20201111025136.29818-1-fugang.duan@nxp.com
Cc: stable 
[fix up build warning - gregkh]
Signed-off-by: Greg Kroah-Hartman

serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init

2020-11-10T09:22:20+00:00

commit 0c5fc92622ed5531ff324b20f014e9e3092f0187 upstream.

Add the missing platform_driver_unregister() before return
from serial_txx9_init in the error handling case when failed
to register serial_txx9_pci_driver with macro ENABLE_SERIAL_TXX9_PCI
defined.

Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/")
Signed-off-by: Qinglang Miao 
Link: https://lore.kernel.org/r/20201103084942.109076-1-miaoqinglang@huawei.com
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_mtk: Fix uart_get_baud_rate warning

2020-11-10T09:22:20+00:00

commit 912ab37c798770f21b182d656937072b58553378 upstream.

Mediatek 8250 port supports speed higher than uartclk / 16. If the baud
rates in both the new and the old termios setting are higher than
uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered.
Passing NULL as the old termios so uart_get_baud_rate() will use
uartclk / 16 - 1 as the new baud rate which will be replaced by the
original baud rate later by tty_termios_encode_baud_rate() in
mtk8250_set_termios().

Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping")
Signed-off-by: Claire Chang 
Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

vt: Disable KD_FONT_OP_COPY

2020-11-10T09:22:20+00:00

commit 3c4e0dff2095c579b142d5a0693257f1c58b4804 upstream.

It's buggy:

On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ).  The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
>  for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use  KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.

Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
  and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
  not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016

Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken

https://github.com/systemd/systemd/pull/3651

So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.

Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.

Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:

	/* copy font from active VT, where the font was uploaded to */
	cfo.op = KD_FONT_OP_COPY;
	cfo.height = vcs.v_active-1; /* tty1 == index 0 */
	(void) ioctl(vcfd, KDFONTOP, &cfo);

Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.

v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.

Acked-by: Peilin Ye 
Reported-by: Minh Yuan 
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH 
Cc: Peilin Ye 
Cc: Tetsuo Handa 
Signed-off-by: Daniel Vetter 
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman

tty: make FONTX ioctl use the tty pointer they were actually passed

2020-11-10T09:22:17+00:00

commit 90bfdeef83f1d6c696039b6a917190dcbbad3220 upstream.

Some of the font tty ioctl's always used the current foreground VC for
their operations.  Don't do that then.

This fixes a data race on fg_console.

Side note: both Michael Ellerman and Jiri Slaby point out that all these
ioctls are deprecated, and should probably have been removed long ago,
and everything seems to be using the KDFONTOP ioctl instead.

In fact, Michael points out that it looks like busybox's loadfont
program seems to have switched over to using KDFONTOP exactly _because_
of this bug (ahem.. 12 years ago ;-).

Reported-by: Minh Yuan 
Acked-by: Michael Ellerman 
Acked-by: Jiri Slaby 
Cc: Greg KH 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

vt: keyboard, extend func_buf_lock to readers

2020-11-10T09:22:16+00:00

commit 82e61c3909db51d91b9d3e2071557b6435018b80 upstream.

Both read-side users of func_table/func_buf need locking. Without that,
one can easily confuse the code by repeatedly setting altering strings
like:
while (1)
	for (a = 0; a < 2; a++) {
		struct kbsentry kbs = {};
		strcpy((char *)kbs.kb_string, a ? ".\n" : "88888\n");
		ioctl(fd, KDSKBSENT, &kbs);
	}

When that program runs, one can get unexpected output by holding F1
(note the unxpected period on the last line):
.
88888
.8888

So protect all accesses to 'func_table' (and func_buf) by preexisting
'func_buf_lock'.

It is easy in 'k_fn' handler as 'puts_queue' is expected not to sleep.
On the other hand, KDGKBSENT needs a local (atomic) copy of the string
because copy_to_user can sleep. Use already allocated, but unused
'kbs->kb_string' for that purpose.

Note that the program above needs at least CAP_SYS_TTY_CONFIG.

This depends on the previous patch and on the func_buf_lock lock added
in commit 46ca3f735f34 (tty/vt: fix write/write race in ioctl(KDSKBSENT)
handler) in 5.2.

Likely fixes CVE-2020-25656.

Cc: 
Reported-by: Minh Yuan 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20201019085517.10176-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

vt: keyboard, simplify vt_kdgkbsent

2020-11-10T09:22:16+00:00

commit 6ca03f90527e499dd5e32d6522909e2ad390896b upstream.

Use 'strlen' of the string, add one for NUL terminator and simply do
'copy_to_user' instead of the explicit 'for' loop. This makes the
KDGKBSENT case more compact.

The only thing we need to take care about is NULL 'func_table[i]'. Use
an empty string in that case.

The original check for overflow could never trigger as the func_buf
strings are always shorter or equal to 'struct kbsentry's.

Cc: 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20201019085517.10176-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: ipwireless: fix error handling

2020-10-29T08:03:10+00:00

[ Upstream commit db332356222d9429731ab9395c89cca403828460 ]

ipwireless_send_packet() can only return 0 on success and -ENOMEM on
error, the caller should check non zero for error condition

Signed-off-by: Tong Zhang 
Acked-by: David Sterba 
Link: https://lore.kernel.org/r/20200821161942.36589-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin