linux-stable.git/drivers/tty, branch v4.4.124

pty: cancel pty slave port buf's work in tty_release

2018-03-24T09:58:48+00:00

[ Upstream commit 2b022ab7542df60021ab57854b3faaaf42552eaf ]

In case that CONFIG_SLUB_DEBUG is on and pty is used, races between
release_one_tty and flush_to_ldisc work threads may happen and lead
to use-after-free condition on tty->link->port. Because SLUB_DEBUG
is turned on, freed tty->link->port is filled with POISON_FREE value.
So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc
could return without a problem by checking if tty is NULL.

CPU 0                                 CPU 1
-----                                 -----
release_tty                           pty_write
   cancel_work_sync(tty)                 to = tty->link
   tty_kref_put(tty->link)               tty_schedule_flip(to->port)
      << workqueue >>                 ...
      release_one_tty                 ...
         pty_cleanup                  ...
            kfree(tty->link->port)       << workqueue >>
                                         flush_to_ldisc
                                            tty = READ_ONCE(port->itty)
                                            tty is 0x6b6b6b6b6b6b6b6b
                                            !!PANIC!! access tty->ldisc

 Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93
 pgd = ffffffc0eb1c3000
 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000
 ------------[ cut here ]------------
 Kernel BUG at ffffff800851154c [verbose debug info unavailable]
 Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP
 CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G        W 3.18.31-g0a58eeb #1
 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT)
 Workqueue: events_unbound flush_to_ldisc
 task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000
 PC is at ldsem_down_read_trylock+0x0/0x4c
 LR is at tty_ldisc_ref+0x24/0x4c
 pc : [] lr : [] pstate: 80400145
 sp : ffffffc0ed627cd0
 x29: ffffffc0ed627cd0 x28: 0000000000000000
 x27: ffffff8009e05000 x26: ffffffc0d382cfa0
 x25: 0000000000000000 x24: ffffff800a012f08
 x23: 0000000000000000 x22: ffffffc0703fbc88
 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93
 x19: 0000000000000000 x18: 0000000000000001
 x17: 00e80000f80d6f53 x16: 0000000000000001
 x15: 0000007f7d826fff x14: 00000000000000a0
 x13: 0000000000000000 x12: 0000000000000109
 x11: 0000000000000000 x10: 0000000000000000
 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580
 x7 : 0000000000000000 x6 : ffffff800a42e000
 x5 : 00000000000003fc x4 : 0000000003bd1201
 x3 : 0000000000000001 x2 : 0000000000000001
 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93

Signed-off-by: Sahara 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Add Brainboxes UC-260 4 port serial device

2018-03-18T10:17:53+00:00

commit 9f2068f35729948bde84d87a40d135015911345d upstream.

Add PCI ids for two variants of Brainboxes UC-260 quad port
PCI serial cards.

Suggested-by: Andy Shevchenko 
Signed-off-by: Nikola Ciprich 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty/serial: atmel: add new version check for usart

2018-03-18T10:17:53+00:00

commit fd63a8903a2c40425a9811c3371dd4d0f42c0ad3 upstream.

On our at91sam9260 based board the usart0 and usart1 ports report
their versions (ATMEL_US_VERSION) as 0x10302. This version is not
included in the current checks in the driver.

Signed-off-by: Jonas Danielsson 
Acked-by: Richard Genoud 
Acked-by: Nicolas Ferre 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: prevent lockup on full TTY buffers

2018-03-18T10:17:53+00:00

commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream.

When the TTY buffers fill up to the configured maximum, a system lockup
occurs:

[  598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks:
[  598.825796]  0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1
[  598.832577]  (detected by 3, t=62517 jiffies, g=296, c=295, q=126)
[  598.838755] Task dump for CPU 0:
[  598.841977] swapper/0       R  running task        0     0      0 0x00000022
[  598.849023] Call trace:
[  598.851476]  __switch_to+0x98/0xb0
[  598.854870]            (null)

This can be prevented by doing a dummy read of the RX data register.

This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0;
reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms
as well.

Reported-by: Yoshihiro Shimoda 
Signed-off-by: Ulrich Hecht 
Reviewed-by: Geert Uytterhoeven 
Cc: stable 
Tested-by: Nguyen Viet Dung 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_mid: fix broken DMA dependency

2018-02-25T10:03:49+00:00

commit 0ff4230584320b2153752ba54e2e8edbd6addf2c upstream.

In order to enable HSU DMA PCI driver, the HSU DMA Engine
must be enabled. This add a check for that.

Reported-by: kbuild test robot 
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

tty: cyclades: cyz_interrupt is only used for PCI

2018-02-25T10:03:48+00:00

commit 05ead49691d245f67bdd1b30cab5d9af522ac884 upstream.

When CONFIG_PCI is not set, enabling CONFIG_CYZ_INTR has no
practical effect other than generating a warning about an
unused function:

drivers/tty/cyclades.c:1184:20: warning: 'cyz_interrupt' defined but not used [-Wunused-function]
 static irqreturn_t cyz_interrupt(int irq, void *dev_id)

This adds a dependency to avoid that warning.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

tty: hvc_xen: hide xen_console_remove when unused

2018-02-25T10:03:46+00:00

commit e36ae3439936e13c33f5841c7c2c1a9875acbb6d upstream.

xencons_disconnect_backend() is only called from xen_console_remove(),
which is conditionally compiled, so we get a harmless warning when
CONFIG_HVC_XEN_FRONTEND is unset:

hvc/hvc_xen.c:350:12: error: 'xen_console_remove' defined but not used [-Werror=unused-function]

This moves the function down into the same #ifdef section to silence
the warning.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS

2018-02-03T16:04:30+00:00

commit 38b1f0fb42f772b8c9aac53593883a18ff5eb9d7 upstream.

The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS
lines, so only allow such wakeup method when the system actually has
RTS/CTS support.

Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD")
Signed-off-by: Fabio Estevam 
Reviewed-by: Martin Kaiser 
Acked-by: Fugang Duan 
Signed-off-by: Greg Kroah-Hartman

sysrq: Fix warning in sysrq generated crash.

2018-01-17T08:35:28+00:00

commit 984cf355aeaa8f2eda3861b50d0e8d3e3f77e83b upstream.

Commit 984d74a72076a1 ("sysrq: rcu-ify __handle_sysrq") replaced
spin_lock_irqsave() calls with rcu_read_lock() calls in sysrq. Since
rcu_read_lock() does not disable preemption, faulthandler_disabled() in
__do_page_fault() in x86/fault.c returns false. When the code later calls
might_sleep() in the pagefault handler, we get the following warning:

BUG: sleeping function called from invalid context at ../arch/x86/mm/fault.c:1187
in_atomic(): 0, irqs_disabled(): 0, pid: 4706, name: bash
Preemption disabled at:[] printk+0x48/0x4a

To fix this, we release the RCU read lock before we crash.

Tested this patch on linux 3.18 by booting off one of our boards.

Fixes: 984d74a72076a1 ("sysrq: rcu-ify __handle_sysrq")

Signed-off-by: Ani Sinha 
Reviewed-by: Rik van Riel 
Signed-off-by: Paul E. McKenney 
Signed-off-by: Davidlohr Bueso 
Signed-off-by: Greg Kroah-Hartman

n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)

2018-01-02T19:33:28+00:00

commit 966031f340185eddd05affcf72b740549f056348 upstream.

We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty:
Add EXTPROC support for LINEMODE") and the intent was to allow it to
override some (all?) ICANON behavior.  Quoting from that original commit
message:

         There is a new bit in the termios local flag word, EXTPROC.
         When this bit is set, several aspects of the terminal driver
         are disabled.  Input line editing, character echo, and mapping
         of signals are all disabled.  This allows the telnetd to turn
         off these functions when in linemode, but still keep track of
         what state the user wants the terminal to be in.

but the problem turns out that "several aspects of the terminal driver
are disabled" is a bit ambiguous, and you can really confuse the n_tty
layer by setting EXTPROC and then causing some of the ICANON invariants
to no longer be maintained.

This fixes at least one such case (TIOCINQ) becoming unhappy because of
the confusion over whether ICANON really means ICANON when EXTPROC is set.

This basically makes TIOCINQ match the case of read: if EXTPROC is set,
we ignore ICANON.  Also, make sure to reset the ICANON state ie EXTPROC
changes, not just if ICANON changes.

Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE")
Reported-by: Tetsuo Handa 
Reported-by: syzkaller 
Cc: Jiri Slaby 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman