linux-stable.git/drivers/tty, branch v4.14.321 Linux kernel stable tree serial: lantiq: add missing interrupt ack 2023-06-28T08:14:18+00:00 Bernhard Seibold mail@bernhard-seibold.de 2023-06-02T13:30:29+00:00 81f0ee3479721d284e6b52e4bf3b47c3c771d2df commit 306320034e8fbe7ee1cc4f5269c55658b4612048 upstream. Currently, the error interrupt is never acknowledged, so once active it will stay active indefinitely, causing the handler to be called in an infinite loop. Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.") Cc: <stable@vger.kernel.org> Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 306320034e8fbe7ee1cc4f5269c55658b4612048 upstream.

Currently, the error interrupt is never acknowledged, so once active it
will stay active indefinitely, causing the handler to be called in an
infinite loop.

Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of UARTCTRL_SBK 2023-06-09T08:22:54+00:00 Sherry Sun sherry.sun@nxp.com 2023-05-19T09:47:51+00:00 22fb46cc1cd902363e38739c1fd25b436490ce43 commit 2474e05467c00f7d51af3039b664de6886325257 upstream. LPUART IP now has two known bugs, one is that CTS has higher priority than the break signal, which causes the break signal sending through UARTCTRL_SBK may impacted by the CTS input if the HW flow control is enabled. It exists on all platforms we support in this driver. So we add a workaround patch for this issue: commit c4c81db5cf8b ("tty: serial: fsl_lpuart: disable the CTS when send break signal"). Another IP bug is i.MX8QM LPUART may have an additional break character being sent after SBK was cleared. It may need to add some delay between clearing SBK and re-enabling CTS to ensure that the SBK latch are completely cleared. But we found that during the delay period before CTS is enabled, there is still a risk that Bluetooth data in TX FIFO may be sent out during this period because of break off and CTS disabled(even if BT sets CTS line deasserted, data is still sent to BT). Due to this risk, we have to drop the CTS-disabling workaround for SBK bugs, use TXINV seems to be a better way to replace SBK feature and avoid above risk. Also need to disable the transmitter to prevent any data from being sent out during break, then invert the TX line to send break. Then disable the TXINV when turn off break and re-enable transmitter. Fixes: c4c81db5cf8b ("tty: serial: fsl_lpuart: disable the CTS when send break signal") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230519094751.28948-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2474e05467c00f7d51af3039b664de6886325257 upstream.

LPUART IP now has two known bugs, one is that CTS has higher priority
than the break signal, which causes the break signal sending through
UARTCTRL_SBK may impacted by the CTS input if the HW flow control is
enabled. It exists on all platforms we support in this driver.
So we add a workaround patch for this issue: commit c4c81db5cf8b
("tty: serial: fsl_lpuart: disable the CTS when send break signal").

Another IP bug is i.MX8QM LPUART may have an additional break character
being sent after SBK was cleared. It may need to add some delay between
clearing SBK and re-enabling CTS to ensure that the SBK latch are
completely cleared.

But we found that during the delay period before CTS is enabled, there
is still a risk that Bluetooth data in TX FIFO may be sent out during
this period because of break off and CTS disabled(even if BT sets CTS
line deasserted, data is still sent to BT).

Due to this risk, we have to drop the CTS-disabling workaround for SBK
bugs, use TXINV seems to be a better way to replace SBK feature and
avoid above risk. Also need to disable the transmitter to prevent any
data from being sent out during break, then invert the TX line to send
break. Then disable the TXINV when turn off break and re-enable
transmitter.

Fixes: c4c81db5cf8b ("tty: serial: fsl_lpuart: disable the CTS when send break signal")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230519094751.28948-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: Add support for Advantech PCI-1611U card 2023-05-30T11:38:37+00:00 Vitaliy Tomin tomin@iszf.irk.ru 2023-04-23T03:45:12+00:00 d8c1f79b1c742250f3e3d352a720cb64f8675153 commit d2b00516de0e1d696724247098f6733a6ea53908 upstream. Add support for Advantech PCI-1611U card Advantech provides opensource drivers for this and many others card based on legacy copy of 8250_pci driver called adv950 https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ It is hard to maintain to run as out of tree module on newer kernels. Just adding PCI ID to kernel 8250_pci works perfect. Signed-off-by: Vitaliy Tomin <tomin@iszf.irk.ru> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230423034512.2671157-1-tomin@iszf.irk.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d2b00516de0e1d696724247098f6733a6ea53908 upstream.

Add support for Advantech PCI-1611U card

Advantech provides opensource drivers for this and many others card
based on legacy copy of 8250_pci driver called adv950

https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ

It is hard to maintain to run as out of tree module on newer kernels.
Just adding PCI ID to kernel 8250_pci works perfect.

Signed-off-by: Vitaliy Tomin <tomin@iszf.irk.ru>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230423034512.2671157-1-tomin@iszf.irk.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: Reinit port->pm on port specific driver unbind 2023-05-30T11:38:35+00:00 Tony Lindgren tony@atomide.com 2023-04-18T10:14:06+00:00 490bf37eaabb0a857ed1ae8e75d8854e41662f1c [ Upstream commit 04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ] When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix the issue by calling serial8250_set_defaults() in serial8250_unregister_port(). This will set the port back to using the serial8250 default functions, and sets the port->pm to point to serial8250_pm. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ]

When we unbind a serial port hardware specific 8250 driver, the generic
serial8250 driver takes over the port. After that we see an oops about 10
seconds later. This can produce the following at least on some TI SoCs:

Unhandled fault: imprecise external abort (0x1406)
Internal error: : 1406 [#1] SMP ARM

Turns out that we may still have the serial port hardware specific driver
port->pm in use, and serial8250_pm() tries to call it after the port
specific driver is gone:

serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base]
uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base]
uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c
__tty_hangup.part.0 from disassociate_ctty+0x154/0x20c
disassociate_ctty from do_exit+0x744/0xaac
do_exit from do_group_exit+0x40/0x8c
do_group_exit from __wake_up_parent+0x0/0x1c

Let's fix the issue by calling serial8250_set_defaults() in
serial8250_unregister_port(). This will set the port back to using
the serial8250 default functions, and sets the port->pm to point to
serial8250_pm.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250: Fix serial8250_tx_empty() race with DMA Tx 2023-05-17T09:11:51+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2023-05-11T12:32:44+00:00 249a0c02aa068f83a0d513556c9ff9883ea225ee There's a potential race before THRE/TEMT deasserts when DMA Tx is starting up (or the next batch of continuous Tx is being submitted). This can lead to misdetecting Tx empty condition. It is entirely normal for THRE/TEMT to be set for some time after the DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely not empty at that point, it seems incorrect for serial8250_tx_empty() claim Tx is empty. Fix the race by also checking in serial8250_tx_empty() whether there's DMA Tx active. Note: This fix only addresses in-kernel race mainly to make using TCSADRAIN/FLUSH robust. Userspace can still cause other races but they seem userspace concurrency control problems. Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f) Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.

It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.

Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.

Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.

Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH 2023-05-17T09:11:51+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2023-05-11T12:32:43+00:00 93577c9365cc39b21a442c925365b4b751160877 If userspace races tcsetattr() with a write, the drained condition might not be guaranteed by the kernel. There is a race window after checking Tx is empty before tty_set_termios() takes termios_rwsem for write. During that race window, more characters can be queued by a racing writer. Any ongoing transmission might produce garbage during HW's ->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be preventing such a character corruption. If those flags are set, take tty's write lock to stop any writer before performing the lower layer Tx empty check and wait for the pending characters to be sent (if any). The initial wait for all-writers-done must be placed outside of tty's write lock to avoid deadlock which makes it impossible to use tty_wait_until_sent(). The write lock is retried if a racing write is detected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2) Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.

Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).

The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: Add missing wakeup event reporting 2023-05-17T09:11:44+00:00 Florian Fainelli f.fainelli@gmail.com 2023-04-14T17:02:39+00:00 edfe57aedff4ecf3606533aabf8ecf7676c3c5d9 [ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ] An 8250 UART configured as a wake-up source would not have reported itself through sysfs as being the source of wake-up, correct that. Fixes: b3b708fa2780 ("wake up from a serial port") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ]

An 8250 UART configured as a wake-up source would not have reported
itself through sysfs as being the source of wake-up, correct that.

Fixes: b3b708fa2780 ("wake up from a serial port")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: serial: fsl_lpuart: adjust buffer length to the intended size 2023-05-17T09:11:44+00:00 Shenwei Wang shenwei.wang@nxp.com 2023-04-10T19:55:55+00:00 a4c11d573e77c26765eeb27709c89835546c0d8b [ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ] Based on the fls function definition provided below, we should not subtract 1 to obtain the correct buffer length: fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20230410195555.1003900-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ]

Based on the fls function definition provided below, we should not
subtract 1 to obtain the correct buffer length:

fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.

Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230410195555.1003900-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: serial: sh-sci: Fix Rx on RZ/G2L SCI 2023-04-20T10:02:11+00:00 Biju Das biju.das.jz@bp.renesas.com 2023-03-21T11:47:50+00:00 174d8d609e61ccfd80a76a0b621eeb1e326f3bf2 commit f92ed0cd9328aed918ebb0ebb64d259eccbcc6e7 upstream. SCI IP on RZ/G2L alike SoCs do not need regshift compared to other SCI IPs on the SH platform. Currently, it does regshift and configuring Rx wrongly. Drop adding regshift for RZ/G2L alike SoCs. Fixes: dfc80387aefb ("serial: sh-sci: Compute the regshift value for SCI ports") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230321114753.75038-3-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f92ed0cd9328aed918ebb0ebb64d259eccbcc6e7 upstream.

SCI IP on RZ/G2L alike SoCs do not need regshift compared to other SCI
IPs on the SH platform. Currently, it does regshift and configuring Rx
wrongly. Drop adding regshift for RZ/G2L alike SoCs.

Fixes: dfc80387aefb ("serial: sh-sci: Compute the regshift value for SCI ports")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230321114753.75038-3-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hvc/xen: prevent concurrent accesses to the shared ring 2023-04-05T09:14:16+00:00 Roger Pau Monne roger.pau@citrix.com 2022-11-30T15:09:11+00:00 38d976de63159c44f077215c344e363243caac69 [ Upstream commit 6214894f49a967c749ee6c07cb00f9cede748df4 ] The hvc machinery registers both a console and a tty device based on the hv ops provided by the specific implementation. Those two interfaces however have different locks, and there's no single locks that's shared between the tty and the console implementations, hence the driver needs to protect itself against concurrent accesses. Otherwise concurrent calls using the split interfaces are likely to corrupt the ring indexes, leaving the console unusable. Introduce a lock to xencons_info to serialize accesses to the shared ring. This is only required when using the shared memory console, concurrent accesses to the hypercall based console implementation are not an issue. Note the conditional logic in domU_read_console() is slightly modified so the notify_daemon() call can be done outside of the locked region: it's an hypercall and there's no need for it to be done with the lock held. Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6214894f49a967c749ee6c07cb00f9cede748df4 ]

The hvc machinery registers both a console and a tty device based on
the hv ops provided by the specific implementation.  Those two
interfaces however have different locks, and there's no single locks
that's shared between the tty and the console implementations, hence
the driver needs to protect itself against concurrent accesses.
Otherwise concurrent calls using the split interfaces are likely to
corrupt the ring indexes, leaving the console unusable.

Introduce a lock to xencons_info to serialize accesses to the shared
ring.  This is only required when using the shared memory console,
concurrent accesses to the hypercall based console implementation are
not an issue.

Note the conditional logic in domU_read_console() is slightly modified
so the notify_daemon() call can be done outside of the locked region:
it's an hypercall and there's no need for it to be done with the lock
held.

Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>