linux-stable.git/drivers/tty, branch v4.14.28 Linux kernel stable tree earlycon: add reg-offset to physical address before mapping 2018-03-19T07:42:47+00:00 Greentime Hu green.hu@gmail.com 2018-02-13T09:09:08+00:00 dbacf552cdbf935a40278e769b2bda4e8e87bdbb commit 1f66dd36bb18437397ea0d7882c52f7e3c476e15 upstream. It will get the wrong virtual address because port->mapbase is not added the correct reg-offset yet. We have to update it before earlycon_map() is called Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: stable@vger.kernel.org Fixes: 088da2a17619 ("of: earlycon: Initialize port fields from DT properties") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1f66dd36bb18437397ea0d7882c52f7e3c476e15 upstream.

It will get the wrong virtual address because port->mapbase is not added
the correct reg-offset yet. We have to update it before earlycon_map()
is called

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: stable@vger.kernel.org
Fixes: 088da2a17619 ("of: earlycon: Initialize port fields from DT properties")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: core: mark port as initialized in autoconfig 2018-03-19T07:42:46+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2018-02-03T11:27:23+00:00 0da58aed9edc8acf09ca3711597a5fff96632577 commit 714569064adee3c114a2a6490735b94abe269068 upstream. This is a followup on 44117a1d1732 ("serial: core: mark port as initialized after successful IRQ change"). Nikola has been using autoconfig via setserial and reported a crash similar to what I fixed in the earlier mentioned commit. Here I do the same fixup for the autoconfig. I wasn't sure that this is the right approach. Nikola confirmed that it fixes his crash. Fixes: b3b576461864 ("tty: serial_core: convert uart_open to use tty_port_open") Link: http://lkml.kernel.org/r/20180131072000.GD1853@localhost.localdomain Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 714569064adee3c114a2a6490735b94abe269068 upstream.

This is a followup on 44117a1d1732 ("serial: core: mark port as
initialized after successful IRQ change").
Nikola has been using autoconfig via setserial and reported a crash
similar to what I fixed in the earlier mentioned commit. Here I do the
same fixup for the autoconfig. I wasn't sure that this is the right
approach. Nikola confirmed that it fixes his crash.

Fixes: b3b576461864 ("tty: serial_core: convert uart_open to use tty_port_open")
Link: http://lkml.kernel.org/r/20180131072000.GD1853@localhost.localdomain
Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_pci: Add Brainboxes UC-260 4 port serial device 2018-03-19T07:42:46+00:00 Nikola Ciprich nikola.ciprich@linuxbox.cz 2018-02-13T14:04:46+00:00 099d055f8ab9e4e4431484b3a4b8ca8fc826293a commit 9f2068f35729948bde84d87a40d135015911345d upstream. Add PCI ids for two variants of Brainboxes UC-260 quad port PCI serial cards. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9f2068f35729948bde84d87a40d135015911345d upstream.

Add PCI ids for two variants of Brainboxes UC-260 quad port
PCI serial cards.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty/serial: atmel: add new version check for usart 2018-03-19T07:42:45+00:00 Jonas Danielsson jonas@orbital-systems.com 2018-01-29T11:39:15+00:00 3c8e0474f543dfa58a3f192ec6b7a7397306be4b commit fd63a8903a2c40425a9811c3371dd4d0f42c0ad3 upstream. On our at91sam9260 based board the usart0 and usart1 ports report their versions (ATMEL_US_VERSION) as 0x10302. This version is not included in the current checks in the driver. Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fd63a8903a2c40425a9811c3371dd4d0f42c0ad3 upstream.

On our at91sam9260 based board the usart0 and usart1 ports report
their versions (ATMEL_US_VERSION) as 0x10302. This version is not
included in the current checks in the driver.

Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: sh-sci: prevent lockup on full TTY buffers 2018-03-19T07:42:45+00:00 Ulrich Hecht ulrich.hecht+renesas@gmail.com 2018-02-15T12:02:27+00:00 a6a8916de0db0468dbc34b100a2065555f1078d3 commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream. When the TTY buffers fill up to the configured maximum, a system lockup occurs: [ 598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 598.825796] 0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1 [ 598.832577] (detected by 3, t=62517 jiffies, g=296, c=295, q=126) [ 598.838755] Task dump for CPU 0: [ 598.841977] swapper/0 R running task 0 0 0 0x00000022 [ 598.849023] Call trace: [ 598.851476] __switch_to+0x98/0xb0 [ 598.854870] (null) This can be prevented by doing a dummy read of the RX data register. This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0; reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms as well. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream.

When the TTY buffers fill up to the configured maximum, a system lockup
occurs:

[  598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks:
[  598.825796]  0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1
[  598.832577]  (detected by 3, t=62517 jiffies, g=296, c=295, q=126)
[  598.838755] Task dump for CPU 0:
[  598.841977] swapper/0       R  running task        0     0      0 0x00000022
[  598.849023] Call trace:
[  598.851476]  __switch_to+0x98/0xb0
[  598.854870]            (null)

This can be prevented by doing a dummy read of the RX data register.

This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0;
reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms
as well.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: core: mark port as initialized after successful IRQ change 2018-02-07T19:12:26+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2018-01-11T17:57:26+00:00 a252f37c5f8b998ccd419d1562a3c069890eb1d4 commit 44117a1d1732c513875d5a163f10d9adbe866c08 upstream. setserial changes the IRQ via uart_set_info(). It invokes uart_shutdown() which free the current used IRQ and clear TTY_PORT_INITIALIZED. It will then update the IRQ number and invoke uart_startup() before returning to the caller leaving TTY_PORT_INITIALIZED cleared. The next open will crash with | list_add double add: new=ffffffff839fcc98, prev=ffffffff839fcc98, next=ffffffff839fcc98. since the close from the IOCTL won't free the IRQ (and clean the list) due to the TTY_PORT_INITIALIZED check in uart_shutdown(). There is same pattern in uart_do_autoconfig() and I *think* it also needs to set TTY_PORT_INITIALIZED there. Is there a reason why uart_startup() does not set the flag by itself after the IRQ has been acquired (since it is cleared in uart_shutdown)? Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 44117a1d1732c513875d5a163f10d9adbe866c08 upstream.

setserial changes the IRQ via uart_set_info(). It invokes
uart_shutdown() which free the current used IRQ and clear
TTY_PORT_INITIALIZED. It will then update the IRQ number and invoke
uart_startup() before returning to the caller leaving
TTY_PORT_INITIALIZED cleared.

The next open will crash with
|  list_add double add: new=ffffffff839fcc98, prev=ffffffff839fcc98, next=ffffffff839fcc98.
since the close from the IOCTL won't free the IRQ (and clean the list)
due to the TTY_PORT_INITIALIZED check in uart_shutdown().

There is same pattern in uart_do_autoconfig() and I *think* it also
needs to set TTY_PORT_INITIALIZED there.
Is there a reason why uart_startup() does not set the flag by itself
after the IRQ has been acquired (since it is cleared in uart_shutdown)?

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS 2018-02-03T16:39:23+00:00 Fabio Estevam fabio.estevam@nxp.com 2018-01-04T17:58:34+00:00 e6e7d6baa61a57bf61d0d3647a5037ad1013f4db commit 38b1f0fb42f772b8c9aac53593883a18ff5eb9d7 upstream. The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS lines, so only allow such wakeup method when the system actually has RTS/CTS support. Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Martin Kaiser <martin@kaiser.cx> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 38b1f0fb42f772b8c9aac53593883a18ff5eb9d7 upstream.

The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS
lines, so only allow such wakeup method when the system actually has
RTS/CTS support.

Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_uniphier: fix error return code in uniphier_uart_probe() 2018-02-03T16:39:23+00:00 Wei Yongjun weiyongjun1@huawei.com 2018-01-04T07:42:15+00:00 24293a3970e11889cc123d3f0cf9bb9bbb2cf34f commit 7defa77d2baca4d6eb85234f10f38ab618332e75 upstream. Fix to return a negative error code from the port register error handling case instead of 0, as done elsewhere in this function. Fixes: 39be40ce066d ("serial: 8250_uniphier: fix serial port index in private data") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7defa77d2baca4d6eb85234f10f38ab618332e75 upstream.

Fix to return a negative error code from the port register error
handling case instead of 0, as done elsewhere in this function.

Fixes: 39be40ce066d ("serial: 8250_uniphier: fix serial port index in private data")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_of: fix return code when probe function fails to get reset 2018-02-03T16:39:22+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2017-12-27T05:21:05+00:00 aa33208b5a6f0014d9b7d966f61bd6c4f8cd9729 commit b9820a31691b771db37afe2054dd3d3a680c1eed upstream. The error pointer from devm_reset_control_get_optional_shared() is not propagated. One of the most common problem scenarios is it returns -EPROBE_DEFER when the reset controller has not probed yet. In this case, the probe of the reset consumer should be deferred. Fixes: e2860e1f62f2 ("serial: 8250_of: Add reset support") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b9820a31691b771db37afe2054dd3d3a680c1eed upstream.

The error pointer from devm_reset_control_get_optional_shared() is
not propagated.

One of the most common problem scenarios is it returns -EPROBE_DEFER
when the reset controller has not probed yet.  In this case, the
probe of the reset consumer should be deferred.

Fixes: e2860e1f62f2 ("serial: 8250_of: Add reset support")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: fix data race between tty_init_dev and flush of buf 2018-02-03T16:39:19+00:00 Gaurav Kohli gkohli@codeaurora.org 2018-01-23T07:46:34+00:00 3c538ad935465d7ba4bf0b5747fadcfdf05311c9 commit b027e2298bd588d6fa36ed2eda97447fb3eac078 upstream. There can be a race, if receive_buf call comes before tty initialization completes in n_tty_open and tty->disc_data may be NULL. CPU0 CPU1 ---- ---- 000|n_tty_receive_buf_common() n_tty_open() -001|n_tty_receive_buf2() tty_ldisc_open.isra.3() -002|tty_ldisc_receive_buf(inline) tty_ldisc_setup() Using ldisc semaphore lock in tty_init_dev till disc_data initializes completely. Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b027e2298bd588d6fa36ed2eda97447fb3eac078 upstream.

There can be a race, if receive_buf call comes before
tty initialization completes in n_tty_open and tty->disc_data
may be NULL.

CPU0					CPU1
----					----
 000|n_tty_receive_buf_common()   	n_tty_open()
-001|n_tty_receive_buf2()		tty_ldisc_open.isra.3()
-002|tty_ldisc_receive_buf(inline)	tty_ldisc_setup()

Using ldisc semaphore lock in tty_init_dev till disc_data
initializes completely.

Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>