linux-stable.git/drivers/tty, branch v4.1.45

tty: fix __tty_insert_flip_char regression

2017-10-04T01:36:50+00:00

[ Upstream commit 8a5a90a2a477b86a3dc2eaa5a706db9bfdd647ca ]

Sergey noticed a small but fatal mistake in __tty_insert_flip_char,
leading to an oops in an interrupt handler when using any serial
port.

The problem is that I accidentally took the tty_buffer pointer
before calling __tty_buffer_request_room(), which replaces the
buffer. This moves the pointer lookup to the right place after
allocating the new buffer space.

Fixes: 979990c62848 ("tty: improve tty_insert_flip_char() fast path")
Reported-by: Sergey Senozhatsky 
Tested-by: Sergey Senozhatsky 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: improve tty_insert_flip_char() slow path

2017-10-04T01:36:50+00:00

[ Upstream commit 065ea0a7afd64d6cf3464bdd1d8cd227527e2045 ]

While working on improving the fast path of tty_insert_flip_char(),
I noticed that by calling tty_buffer_request_room(), we needlessly
move to the separate flag buffer mode for the tty, even when all
characters use TTY_NORMAL as the flag.

This changes the code to call __tty_buffer_request_room() with the
correct flag, which will then allocate a regular buffer when it rounds
out of space but no special flags have been used. I'm guessing that
this is the behavior that Peter Hurley intended when he introduced
the compacted flip buffers.

Fixes: acc0f67f307f ("tty: Halve flip buffer GFP_ATOMIC memory consumption")
Cc: Peter Hurley 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: improve tty_insert_flip_char() fast path

2017-10-04T01:36:50+00:00

[ Upstream commit 979990c6284814617d8f2179d197f72ff62b5d85 ]

kernelci.org reports a crazy stack usage for the VT code when CONFIG_KASAN
is enabled:

drivers/tty/vt/keyboard.c: In function 'kbd_keycode':
drivers/tty/vt/keyboard.c:1452:1: error: the frame size of 2240 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

The problem is that tty_insert_flip_char() gets inlined many times into
kbd_keycode(), and also into other functions, and each copy requires 128
bytes for stack redzone to check for a possible out-of-bounds access on
the 'ch' and 'flags' arguments that are passed into
tty_insert_flip_string_flags as a variable-length string.

This introduces a new __tty_insert_flip_char() function for the slow
path, which receives the two arguments by value. This completely avoids
the problem and the stack usage goes back down to around 100 bytes.

Without KASAN, this is also slightly better, as we don't have to
spill the arguments to the stack but can simply pass 'ch' and 'flag'
in registers, saving a few bytes in .text for each call site.

This should be backported to linux-4.0 or later, which first introduced
the stack sanitizer in the kernel.

Cc: stable@vger.kernel.org
Fixes: c420f167db8c ("kasan: enable stack instrumentation")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

vt: fix unchecked __put_user() in tioclinux ioctls

2017-07-31T17:37:55+00:00

[ Upstream commit 6987dc8a70976561d22450b5858fc9767788cc1c ]

Only read access is checked before this call.

Actually, at the moment this is not an issue, as every in-tree arch does
the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU
to tell them apart, but this wasn't the case in the past and may happen
again on some odd arch in the future.

If anyone cares about 3.7 and earlier, this is a security hole (untested)
on real 80386 CPUs.

Signed-off-by: Adam Borowski 
CC: stable@vger.kernel.org # v3.7-
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'

2017-06-26T02:02:21+00:00

[ Upstream commit be40597a1bc173bf9dadccdf5388b956f620ae8f ]

UARTn_FRAME_PARITY_ODD is 0x0300
UARTn_FRAME_PARITY_EVEN is 0x0200
So if the UART is configured for EVEN parity, it would be reported as ODD.
Fix it by correctly testing if the 2 bits are set.

Fixes: 3afbd89c9639 ("serial/efm32: add new driver")
Signed-off-by: Christophe JAILLET 
Acked-by: Uwe Kleine-König 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: 8250_omap: Fix probe and remove for PM runtime

2017-06-13T13:29:20+00:00

[ Upstream commit 4e0f5cc65098ea32a1e77baae74215b9bd5276b1 ]

Otherwise the interconnect related code implementing PM runtime will
produce these errors on a failed probe:

omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1
omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver?

Note that we now also need to check for priv in omap8250_runtime_suspend()
as it has not yet been registered if probe fails. And we need to use
pm_runtime_put_sync() to properly idle the device like we already do
in omap8250_remove().

Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: nozomi: avoid a harmless gcc warning

2017-06-13T13:29:17+00:00

[ Upstream commit a4f642a8a3c2838ad09fe8313d45db46600e1478 ]

The nozomi wireless data driver has its own helper function to
transfer data from a FIFO, doing an extra byte swap on big-endian
architectures, presumably to bring the data back into byte-serial
order after readw() or readl() perform their implicit byteswap.

This helper function is used in the receive_data() function to
first read the length into a 32-bit variable, which causes
a compile-time warning:

drivers/tty/nozomi.c: In function 'receive_data':
drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized]

The problem is that gcc is unsure whether the data was actually
read or not. We know that it is at this point, so we can replace
it with a single readl() to shut up that warning.

I am leaving the byteswap in there, to preserve the existing
behavior, even though this seems fishy: Reading the length of
the data into a cpu-endian variable should normally not use
a second byteswap on big-endian systems, unless the hardware
is aware of the CPU endianess.

There appears to be a lot more confusion about endianess in this
driver, so it probably has not worked on big-endian systems in
a long time, if ever, and I have no way to test it. It's well
possible that this driver has not been used by anyone in a while,
the last patch that looks like it was tested on the hardware is
from 2008.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done

2017-06-13T13:29:17+00:00

[ Upstream commit b389f173aaa1204d6dc1f299082a162eb0491545 ]

When using RS485 in half duplex, RX should be enabled when TX is
finished, and stopped when TX starts.

Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half
duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
was used. So, collisions could happened.

But disabling RX in atmel_start_tx() uncovered another bug:
RX was enabled again in the wrong place (in atmel_tx_dma) instead of
being enabled when TX is finished (in atmel_complete_tx_dma), so the
transmission simply stopped.

This bug was not triggered before commit 0058f0871efe7b01c6
("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
never disabled before.

Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.

Cc: stable@vger.kernel.org
Reported-by: Gil Weber 
Fixes: 0058f0871efe7b01c6
Tested-by: Gil Weber 
Signed-off-by: Richard Genoud 
Acked-by: Alexandre Belloni 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: core: fix crash in uart_suspend_port

2017-06-08T10:12:47+00:00

[ Upstream commit 88e2582e90bb89fe895ff0dceeb5d5ab65d07997 ]

With serdev we might end up with serial ports that have no cdev exported
to userspace, as they are used as the bus interface to other devices. In
that case serial_match_port() won't be able to find a matching tty_dev.

Skip the irq wakeup enabling in that case, as serdev will make sure to
keep the port active, as long as there are devices depending on it.

Fixes: 8ee3fde04758 (tty_port: register tty ports with serdev bus)
Signed-off-by: Lucas Stach 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: Fix GPF in flush_to_ldisc()

2017-06-08T10:12:47+00:00

[ Upstream commit 9ce119f318ba1a07c29149301f1544b6c4bea52a ]

A line discipline which does not define a receive_buf() method can
can cause a GPF if data is ever received [1]. Oddly, this was known
to the author of n_tracesink in 2011, but never fixed.

[1] GPF report
    BUG: unable to handle kernel NULL pointer dereference at           (null)
    IP: [<          (null)>]           (null)
    PGD 3752d067 PUD 37a7b067 PMD 0
    Oops: 0010 [#1] SMP KASAN
    Modules linked in:
    CPU: 2 PID: 148 Comm: kworker/u10:2 Not tainted 4.4.0-rc2+ #51
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: events_unbound flush_to_ldisc
    task: ffff88006da94440 ti: ffff88006db60000 task.ti: ffff88006db60000
    RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
    RSP: 0018:ffff88006db67b50  EFLAGS: 00010246
    RAX: 0000000000000102 RBX: ffff88003ab32f88 RCX: 0000000000000102
    RDX: 0000000000000000 RSI: ffff88003ab330a6 RDI: ffff88003aabd388
    RBP: ffff88006db67c48 R08: ffff88003ab32f9c R09: ffff88003ab31fb0
    R10: ffff88003ab32fa8 R11: 0000000000000000 R12: dffffc0000000000
    R13: ffff88006db67c20 R14: ffffffff863df820 R15: ffff88003ab31fb8
    FS:  0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 0000000000000000 CR3: 0000000037938000 CR4: 00000000000006e0
    Stack:
     ffffffff829f46f1 ffff88006da94bf8 ffff88006da94bf8 0000000000000000
     ffff88003ab31fb0 ffff88003aabd438 ffff88003ab31ff8 ffff88006430fd90
     ffff88003ab32f9c ffffed0007557a87 1ffff1000db6cf78 ffff88003ab32078
    Call Trace:
     [] process_one_work+0x8f1/0x17a0 kernel/workqueue.c:2030
     [] worker_thread+0xd4/0x1180 kernel/workqueue.c:2162
     [] kthread+0x1cf/0x270 drivers/block/aoe/aoecmd.c:1302
     [] ret_from_fork+0x3f/0x70 arch/x86/entry/entry_64.S:468
    Code:  Bad RIP value.
    RIP  [<          (null)>]           (null)
     RSP 
    CR2: 0000000000000000
    ---[ end trace a587f8947e54d6ea ]---

Reported-by: Dmitry Vyukov 
Cc: 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin