linux-stable.git/drivers/tty, branch v4.1.44 Linux kernel stable tree vt: fix unchecked __put_user() in tioclinux ioctls 2017-07-31T17:37:55+00:00 Adam Borowski kilobyte@angband.pl 2017-06-03T07:35:06+00:00 e3400a3cdb16b3dc70a5a4b4ca86322ebc3634ac [ Upstream commit 6987dc8a70976561d22450b5858fc9767788cc1c ] Only read access is checked before this call. Actually, at the moment this is not an issue, as every in-tree arch does the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU to tell them apart, but this wasn't the case in the past and may happen again on some odd arch in the future. If anyone cares about 3.7 and earlier, this is a security hole (untested) on real 80386 CPUs. Signed-off-by: Adam Borowski <kilobyte@angband.pl> CC: stable@vger.kernel.org # v3.7- Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit 6987dc8a70976561d22450b5858fc9767788cc1c ]

Only read access is checked before this call.

Actually, at the moment this is not an issue, as every in-tree arch does
the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU
to tell them apart, but this wasn't the case in the past and may happen
again on some odd arch in the future.

If anyone cares about 3.7 and earlier, this is a security hole (untested)
on real 80386 CPUs.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
CC: stable@vger.kernel.org # v3.7-
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
serial: efm32: Fix parity management in 'efm32_uart_console_get_options()' 2017-06-26T02:02:21+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2017-05-12T14:35:45+00:00 daccc774edf2011ce0dfd6083b71f6eb87535d48 [ Upstream commit be40597a1bc173bf9dadccdf5388b956f620ae8f ] UARTn_FRAME_PARITY_ODD is 0x0300 UARTn_FRAME_PARITY_EVEN is 0x0200 So if the UART is configured for EVEN parity, it would be reported as ODD. Fix it by correctly testing if the 2 bits are set. Fixes: 3afbd89c9639 ("serial/efm32: add new driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit be40597a1bc173bf9dadccdf5388b956f620ae8f ]

UARTn_FRAME_PARITY_ODD is 0x0300
UARTn_FRAME_PARITY_EVEN is 0x0200
So if the UART is configured for EVEN parity, it would be reported as ODD.
Fix it by correctly testing if the 2 bits are set.

Fixes: 3afbd89c9639 ("serial/efm32: add new driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
serial: 8250_omap: Fix probe and remove for PM runtime 2017-06-13T13:29:20+00:00 Tony Lindgren tony@atomide.com 2017-01-20T20:22:31+00:00 ddfc6a095d10d9ff391d50c8935baf56749b4e6c [ Upstream commit 4e0f5cc65098ea32a1e77baae74215b9bd5276b1 ] Otherwise the interconnect related code implementing PM runtime will produce these errors on a failed probe: omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1 omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver? Note that we now also need to check for priv in omap8250_runtime_suspend() as it has not yet been registered if probe fails. And we need to use pm_runtime_put_sync() to properly idle the device like we already do in omap8250_remove(). Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit 4e0f5cc65098ea32a1e77baae74215b9bd5276b1 ]

Otherwise the interconnect related code implementing PM runtime will
produce these errors on a failed probe:

omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1
omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver?

Note that we now also need to check for priv in omap8250_runtime_suspend()
as it has not yet been registered if probe fails. And we need to use
pm_runtime_put_sync() to properly idle the device like we already do
in omap8250_remove().

Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
tty: nozomi: avoid a harmless gcc warning 2017-06-13T13:29:17+00:00 Arnd Bergmann arnd@arndb.de 2016-01-25T21:54:56+00:00 56c3cd0967478845b45068347d01fc115520ddd5 [ Upstream commit a4f642a8a3c2838ad09fe8313d45db46600e1478 ] The nozomi wireless data driver has its own helper function to transfer data from a FIFO, doing an extra byte swap on big-endian architectures, presumably to bring the data back into byte-serial order after readw() or readl() perform their implicit byteswap. This helper function is used in the receive_data() function to first read the length into a 32-bit variable, which causes a compile-time warning: drivers/tty/nozomi.c: In function 'receive_data': drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized] The problem is that gcc is unsure whether the data was actually read or not. We know that it is at this point, so we can replace it with a single readl() to shut up that warning. I am leaving the byteswap in there, to preserve the existing behavior, even though this seems fishy: Reading the length of the data into a cpu-endian variable should normally not use a second byteswap on big-endian systems, unless the hardware is aware of the CPU endianess. There appears to be a lot more confusion about endianess in this driver, so it probably has not worked on big-endian systems in a long time, if ever, and I have no way to test it. It's well possible that this driver has not been used by anyone in a while, the last patch that looks like it was tested on the hardware is from 2008. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit a4f642a8a3c2838ad09fe8313d45db46600e1478 ]

The nozomi wireless data driver has its own helper function to
transfer data from a FIFO, doing an extra byte swap on big-endian
architectures, presumably to bring the data back into byte-serial
order after readw() or readl() perform their implicit byteswap.

This helper function is used in the receive_data() function to
first read the length into a 32-bit variable, which causes
a compile-time warning:

drivers/tty/nozomi.c: In function 'receive_data':
drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized]

The problem is that gcc is unsure whether the data was actually
read or not. We know that it is at this point, so we can replace
it with a single readl() to shut up that warning.

I am leaving the byteswap in there, to preserve the existing
behavior, even though this seems fishy: Reading the length of
the data into a cpu-endian variable should normally not use
a second byteswap on big-endian systems, unless the hardware
is aware of the CPU endianess.

There appears to be a lot more confusion about endianess in this
driver, so it probably has not worked on big-endian systems in
a long time, if ever, and I have no way to test it. It's well
possible that this driver has not been used by anyone in a while,
the last patch that looks like it was tested on the hardware is
from 2008.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done 2017-06-13T13:29:17+00:00 Richard Genoud richard.genoud@gmail.com 2016-12-06T12:05:33+00:00 5ce729a895b0c6cb21bc20e614d12a1b8ae850ab [ Upstream commit b389f173aaa1204d6dc1f299082a162eb0491545 ] When using RS485 in half duplex, RX should be enabled when TX is finished, and stopped when TX starts. Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA was used. So, collisions could happened. But disabling RX in atmel_start_tx() uncovered another bug: RX was enabled again in the wrong place (in atmel_tx_dma) instead of being enabled when TX is finished (in atmel_complete_tx_dma), so the transmission simply stopped. This bug was not triggered before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was never disabled before. Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem. Cc: stable@vger.kernel.org Reported-by: Gil Weber <webergil@gmail.com> Fixes: 0058f0871efe7b01c6 Tested-by: Gil Weber <webergil@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit b389f173aaa1204d6dc1f299082a162eb0491545 ]

When using RS485 in half duplex, RX should be enabled when TX is
finished, and stopped when TX starts.

Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half
duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
was used. So, collisions could happened.

But disabling RX in atmel_start_tx() uncovered another bug:
RX was enabled again in the wrong place (in atmel_tx_dma) instead of
being enabled when TX is finished (in atmel_complete_tx_dma), so the
transmission simply stopped.

This bug was not triggered before commit 0058f0871efe7b01c6
("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
never disabled before.

Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.

Cc: stable@vger.kernel.org
Reported-by: Gil Weber <webergil@gmail.com>
Fixes: 0058f0871efe7b01c6
Tested-by: Gil Weber <webergil@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
serial: core: fix crash in uart_suspend_port 2017-06-08T10:12:47+00:00 Lucas Stach l.stach@pengutronix.de 2017-05-11T10:56:14+00:00 682182e924eaa20d0b00b8e3297a50bf87855ddf [ Upstream commit 88e2582e90bb89fe895ff0dceeb5d5ab65d07997 ] With serdev we might end up with serial ports that have no cdev exported to userspace, as they are used as the bus interface to other devices. In that case serial_match_port() won't be able to find a matching tty_dev. Skip the irq wakeup enabling in that case, as serdev will make sure to keep the port active, as long as there are devices depending on it. Fixes: 8ee3fde04758 (tty_port: register tty ports with serdev bus) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit 88e2582e90bb89fe895ff0dceeb5d5ab65d07997 ]

With serdev we might end up with serial ports that have no cdev exported
to userspace, as they are used as the bus interface to other devices. In
that case serial_match_port() won't be able to find a matching tty_dev.

Skip the irq wakeup enabling in that case, as serdev will make sure to
keep the port active, as long as there are devices depending on it.

Fixes: 8ee3fde04758 (tty_port: register tty ports with serdev bus)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
tty: Fix GPF in flush_to_ldisc() 2017-06-08T10:12:47+00:00 Peter Hurley peter@hurleysoftware.com 2015-11-27T19:25:08+00:00 b614900e06509cba6a33b563b95c121f615c8863 [ Upstream commit 9ce119f318ba1a07c29149301f1544b6c4bea52a ] A line discipline which does not define a receive_buf() method can can cause a GPF if data is ever received [1]. Oddly, this was known to the author of n_tracesink in 2011, but never fixed. [1] GPF report BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 3752d067 PUD 37a7b067 PMD 0 Oops: 0010 [#1] SMP KASAN Modules linked in: CPU: 2 PID: 148 Comm: kworker/u10:2 Not tainted 4.4.0-rc2+ #51 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events_unbound flush_to_ldisc task: ffff88006da94440 ti: ffff88006db60000 task.ti: ffff88006db60000 RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff88006db67b50 EFLAGS: 00010246 RAX: 0000000000000102 RBX: ffff88003ab32f88 RCX: 0000000000000102 RDX: 0000000000000000 RSI: ffff88003ab330a6 RDI: ffff88003aabd388 RBP: ffff88006db67c48 R08: ffff88003ab32f9c R09: ffff88003ab31fb0 R10: ffff88003ab32fa8 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff88006db67c20 R14: ffffffff863df820 R15: ffff88003ab31fb8 FS: 0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000037938000 CR4: 00000000000006e0 Stack: ffffffff829f46f1 ffff88006da94bf8 ffff88006da94bf8 0000000000000000 ffff88003ab31fb0 ffff88003aabd438 ffff88003ab31ff8 ffff88006430fd90 ffff88003ab32f9c ffffed0007557a87 1ffff1000db6cf78 ffff88003ab32078 Call Trace: [<ffffffff8127cf91>] process_one_work+0x8f1/0x17a0 kernel/workqueue.c:2030 [<ffffffff8127df14>] worker_thread+0xd4/0x1180 kernel/workqueue.c:2162 [<ffffffff8128faaf>] kthread+0x1cf/0x270 drivers/block/aoe/aoecmd.c:1302 [<ffffffff852a7c2f>] ret_from_fork+0x3f/0x70 arch/x86/entry/entry_64.S:468 Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff88006db67b50> CR2: 0000000000000000 ---[ end trace a587f8947e54d6ea ]--- Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit 9ce119f318ba1a07c29149301f1544b6c4bea52a ]

A line discipline which does not define a receive_buf() method can
can cause a GPF if data is ever received [1]. Oddly, this was known
to the author of n_tracesink in 2011, but never fixed.

[1] GPF report
    BUG: unable to handle kernel NULL pointer dereference at           (null)
    IP: [<          (null)>]           (null)
    PGD 3752d067 PUD 37a7b067 PMD 0
    Oops: 0010 [#1] SMP KASAN
    Modules linked in:
    CPU: 2 PID: 148 Comm: kworker/u10:2 Not tainted 4.4.0-rc2+ #51
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: events_unbound flush_to_ldisc
    task: ffff88006da94440 ti: ffff88006db60000 task.ti: ffff88006db60000
    RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
    RSP: 0018:ffff88006db67b50  EFLAGS: 00010246
    RAX: 0000000000000102 RBX: ffff88003ab32f88 RCX: 0000000000000102
    RDX: 0000000000000000 RSI: ffff88003ab330a6 RDI: ffff88003aabd388
    RBP: ffff88006db67c48 R08: ffff88003ab32f9c R09: ffff88003ab31fb0
    R10: ffff88003ab32fa8 R11: 0000000000000000 R12: dffffc0000000000
    R13: ffff88006db67c20 R14: ffffffff863df820 R15: ffff88003ab31fb8
    FS:  0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 0000000000000000 CR3: 0000000037938000 CR4: 00000000000006e0
    Stack:
     ffffffff829f46f1 ffff88006da94bf8 ffff88006da94bf8 0000000000000000
     ffff88003ab31fb0 ffff88003aabd438 ffff88003ab31ff8 ffff88006430fd90
     ffff88003ab32f9c ffffed0007557a87 1ffff1000db6cf78 ffff88003ab32078
    Call Trace:
     [<ffffffff8127cf91>] process_one_work+0x8f1/0x17a0 kernel/workqueue.c:2030
     [<ffffffff8127df14>] worker_thread+0xd4/0x1180 kernel/workqueue.c:2162
     [<ffffffff8128faaf>] kthread+0x1cf/0x270 drivers/block/aoe/aoecmd.c:1302
     [<ffffffff852a7c2f>] ret_from_fork+0x3f/0x70 arch/x86/entry/entry_64.S:468
    Code:  Bad RIP value.
    RIP  [<          (null)>]           (null)
     RSP <ffff88006db67b50>
    CR2: 0000000000000000
    ---[ end trace a587f8947e54d6ea ]---

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
tty: fix data race in flush_to_ldisc 2017-06-08T10:12:47+00:00 Dmitry Vyukov dvyukov@google.com 2015-09-17T15:17:08+00:00 2e279b7d786ccbe8aa4345c1ec43bafab179b409 [ Upstream commit 7098296a362a96051fa120abf48f0095818b99cd ] flush_to_ldisc reads port->itty and checks that it is not NULL, concurrently release_tty sets port->itty to NULL. It is possible that flush_to_ldisc loads port->itty once, ensures that it is not NULL, but then reloads it again and uses. The second load can already return NULL, which will cause a crash. Use READ_ONCE to read port->itty. The data race was found with KernelThreadSanitizer (KTSAN). Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit 7098296a362a96051fa120abf48f0095818b99cd ]

flush_to_ldisc reads port->itty and checks that it is not NULL,
concurrently release_tty sets port->itty to NULL. It is possible
that flush_to_ldisc loads port->itty once, ensures that it is
not NULL, but then reloads it again and uses. The second load
can already return NULL, which will cause a crash.

Use READ_ONCE to read port->itty.

The data race was found with KernelThreadSanitizer (KTSAN).

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
serial: ifx6x60: fix use-after-free on module unload 2017-06-08T10:12:47+00:00 Johan Hovold johan@kernel.org 2017-04-26T10:24:21+00:00 3e984ccc90f828efb6606b12c7097c958de0393d [ Upstream commit 1e948479b3d63e3ac0ecca13cbf4921c7d17c168 ] Make sure to deregister the SPI driver before releasing the tty driver to avoid use-after-free in the SPI remove callback where the tty devices are deregistered. Fixes: 72d4724ea54c ("serial: ifx6x60: Add modem power off function in the platform reboot process") Cc: stable <stable@vger.kernel.org> # 3.8 Cc: Jun Chen <jun.d.chen@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit 1e948479b3d63e3ac0ecca13cbf4921c7d17c168 ]

Make sure to deregister the SPI driver before releasing the tty driver
to avoid use-after-free in the SPI remove callback where the tty
devices are deregistered.

Fixes: 72d4724ea54c ("serial: ifx6x60: Add modem power off function in the platform reboot process")
Cc: stable <stable@vger.kernel.org>     # 3.8
Cc: Jun Chen <jun.d.chen@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
serial: ifx6x60: Remove dangerous spi_driver casts 2017-06-08T10:12:47+00:00 Geert Uytterhoeven geert@linux-m68k.org 2015-04-23T14:15:39+00:00 191c13c554e5af263e090148288e1b310986455d [ Upstream commit 9a499db0325b8a8e2368f21fef66705b120f38ba ] Casting spi_driver pointers to "void *" when calling spi_{,un}register_driver() bypasses all type checking. Remove the superfluous casts to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> 
[ Upstream commit 9a499db0325b8a8e2368f21fef66705b120f38ba ]

Casting spi_driver pointers to "void *" when calling
spi_{,un}register_driver() bypasses all type checking.

Remove the superfluous casts to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>