linux-stable.git/drivers/tty, branch v3.2.40

8250: use correct value for PORT_BRCM_TRUMANAGE

2013-03-06T03:24:25+00:00

When backporting commit ebebd49a8eab ('8250/16?50: Add support for
Broadcom TruManage redirected serial port') I took the next
available port type number for PORT_BRCM_TRUMANAGE (22).

However, the 8250 port type numbers are exposed to userland through
the TIOC{G,S}SERIAL ioctls and so must remain stable.  Redefine
PORT_BRCM_TRUMANAGE as 25, matching mainline as of commit
85f024401bf807.

This leaves port types 22-24 within the valid range for 8250 but not
implemented there.  Change serial8250_verify_port() to specifically
reject these and change serial8250_type() to return "unknown" for them
(though I'm not sure why it would ever see them).

Signed-off-by: Ben Hutchings

fb: Yet another band-aid for fixing lockdep mess

2013-03-06T03:23:52+00:00

commit e93a9a868792ad71cdd09d75e5a02d8067473c4e upstream.

I've still got lockdep warnings even after Alan's patch, and it seems that
yet more band aids are required to paper over similar paths for
unbind_con_driver() and unregister_con_driver().  After this hack, lockdep
warnings are finally gone.

Signed-off-by: Takashi Iwai 
Cc: Alan Cox 
Cc: Florian Tobias Schandinat 
Cc: Jiri Kosina 
Tested-by: Sedat Dilek 
Signed-off-by: Andrew Morton 
Signed-off-by: Dave Airlie 
Signed-off-by: Ben Hutchings

fb: rework locking to fix lock ordering on takeover

2013-03-06T03:23:52+00:00

commit 50e244cc793d511b86adea24972f3a7264cae114 upstream.

Adjust the console layer to allow a take over call where the caller
already holds the locks.  Make the fb layer lock in order.

This is partly a band aid, the fb layer is terminally confused about the
locking rules it uses for its notifiers it seems.

[akpm@linux-foundation.org: remove stray non-ascii char, tidy comment]
[akpm@linux-foundation.org: export do_take_over_console()]
[airlied: cleanup another non-ascii char]
Signed-off-by: Alan Cox 
Cc: Florian Tobias Schandinat 
Cc: Stephen Rothwell 
Cc: Jiri Kosina 
Tested-by: Sedat Dilek 
Reviewed-by: Daniel Vetter 
Signed-off-by: Andrew Morton 
Signed-off-by: Dave Airlie 
Signed-off-by: Ben Hutchings

vgacon/vt: clear buffer attributes when we load a 512 character font (v2)

2013-03-06T03:23:50+00:00

commit 2a2483072393b27f4336ab068a1f48ca19ff1c1e upstream.

When we switch from 256->512 byte font rendering mode, it means the
current contents of the screen is being reinterpreted. The bit that holds
the high bit of the 9-bit font, may have been previously set, and thus
the new font misrenders.

The problem case we see is grub2 writes spaces with the bit set, so it
ends up with data like 0x820, which gets reinterpreted into 0x120 char
which the font translates into G with a circumflex. This flashes up on
screen at boot and is quite ugly.

A current side effect of this patch though is that any rendering on the
screen changes color to a slightly darker color, but at least the screen
no longer corrupts.

v2: as suggested by hpa, always clear the attribute space, whether we
are are going to or from 512 chars.

Signed-off-by: Dave Airlie 
Signed-off-by: Ben Hutchings

tty: set_termios/set_termiox should not return -EINTR

2013-03-06T03:23:49+00:00

commit 183d95cdd834381c594d3aa801c1f9f9c0c54fa9 upstream.

See https://bugzilla.redhat.com/show_bug.cgi?id=904907
read command causes bash to abort with double free or corruption (out).

A simple test-case from Roman:

	// Compile the reproducer and send sigchld ti that process.
	// EINTR occurs even if SA_RESTART flag is set.

	void handler(int sig)
	{
	}

	main()
	{
	  struct sigaction act;
	  act.sa_handler = handler;
	  act.sa_flags = SA_RESTART;
	  sigaction (SIGCHLD, &act, 0);
	  struct termio ttp;
	  ioctl(0, TCGETA, &ttp);
	  while(1)
	  {
	    if (ioctl(0, TCSETAW, ttp) < 0)
	      {
		if (errno == EINTR)
		{
		  fprintf(stderr, "BUG!"); return(1);
		}
	      }
	  }
	}

Change set_termios/set_termiox to return -ERESTARTSYS to fix this
particular problem.

I didn't dare to change other EINTR's in drivers/tty/, but they look
equally wrong.

Reported-by: Roman Rakus 
Reported-by: Lingzhu Xiang 
Signed-off-by: Oleg Nesterov 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

8250/16?50: Add support for Broadcom TruManage redirected serial port

2013-02-06T04:33:36+00:00

commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream.

Add support for the UART device present in Broadcom TruManage capable
NetXtreme chips (ie: 5761m 5762, and 5725).

This implementation has a hidden transmit FIFO, so running in single-byte
interrupt mode results in too many interrupts.  The UART_CAP_HFIFO
capability was added to track this.  It continues to reload the THR as long
as the THRE and TSRE bits are set in the LSR up to a specified limit (1024
is used here).

Signed-off-by: Stephen Hurd 
Signed-off-by: Michael Chan 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2:
 - Adjust filenames
 - Adjust context
 - First available port type number is 22 not 24
 - s/uart_8250_port/uart_port/
 - Use serial_in() not serial_port_in()]
Signed-off-by: Ben Hutchings

tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler

2013-02-06T04:33:34+00:00

commit 68e56cb3a068f9c30971c6117fbbd1e32918e49e upstream.

Signed-off-by: Maxime Ripard 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

serial:ifx6x60:Delete SPI timer when shut down port

2013-02-06T04:33:34+00:00

commit 014b9b4ce84281ccb3d723c792bed19815f3571a upstream.

When shut down SPI port, it's possible that MRDY has been asserted and a SPI
timer was activated waiting for SRDY assert, in the case, it needs to delete
this timer.

Signed-off-by: Chen Jun 
Signed-off-by: channing 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: pl011: handle corruption at high clock speeds

2012-10-17T02:49:02+00:00

commit c5dd553b9fd069892c9e2de734f4f604e280fa7a upstream.

This works around a few glitches in the ST version of the PL011
serial driver when using very high baud rates, as we do in the
Ux500: 3, 3.25, 4 and 4.05 Mbps.

Problem Observed/rootcause:

When using high baud-rates, and the baudrate*8 is getting close to
the provided clock frequency (so a division factor close to 1), when
using bursts of characters (so they are abutted), then it seems as if
there is not enough time to detect the beginning of the start-bit which
is a timing reference for the entire character, and thus the sampling
moment of character bits is moving towards the end of each bit, instead
of the middle.

Fix:
Increase slightly the RX baud rate of the UART above the theoretical
baudrate by 5%. This will definitely give more margin time to the
UART_RX to correctly sample the data at the middle of the bit period.

Also fix the ages old copy-paste error in the very stressed comment,
it's referencing the registers used in the PL010 driver rather than
the PL011 ones.

Signed-off-by: Guillaume Jaunet 
Signed-off-by: Christophe Arnal 
Signed-off-by: Matthias Locher 
Signed-off-by: Rajanikanth HV 
Cc: Bibek Basu 
Cc: Par-Gunnar Hjalmdahl 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: set correct baud_base for EXSYS EX-41092 Dual 16950

2012-10-17T02:49:01+00:00

commit 26e8220adb0aec43b7acafa0f1431760eee28522 upstream.

Apparently the same card model has two IDs, so this patch
complements the commit 39aced68d664291db3324d0fcf0985ab5626aac2
adding the missing one.

Signed-off-by: Flavio Leitner 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings