linux-stable.git/drivers/tty, branch v3.12.69

tty: audit: Fix audit source

2016-11-28T21:22:57+00:00

commit 6b2a3d628aa752f0ab825fc6d4d07b09e274d1c1 upstream.

The data to audit/record is in the 'from' buffer (ie., the input
read buffer).

Fixes: 72586c6061ab ("n_tty: Fix auditing support for cannonical mode")
Cc: Miloslav Trmač 
Signed-off-by: Peter Hurley 
Acked-by: Laura Abbott 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

tty: vt, fix bogus division in csi_J

2016-11-24T15:23:37+00:00

commit 42acfc6615f47e465731c263bee0c799edb098f2 upstream.

In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is
divided by 2 inappropriatelly. But scr_memsetw expects size, not
count, because it divides the size by 2 on its own before doing actual
memset-by-words.

So remove the bogus division.

Signed-off-by: Jiri Slaby 
Cc: Petr Písař 
Fixes: f8df13e0a9 (tty: Clean console safely)
Signed-off-by: Jiri Slaby

tty: limit terminal size to 4M chars

2016-11-24T15:23:23+00:00

commit 32b2921e6a7461fe63b71217067a6cf4bddb132f upstream.

Size of kmalloc() in vc_do_resize() is controlled by user.
Too large kmalloc() size triggers WARNING message on console.
Put a reasonable upper bound on terminal size to prevent WARNINGs.

Signed-off-by: Dmitry Vyukov 
CC: David Rientjes 
Cc: One Thousand Gnomes 
Cc: Greg Kroah-Hartman 
Cc: Jiri Slaby 
Cc: Peter Hurley 
Cc: linux-kernel@vger.kernel.org
Cc: syzkaller@googlegroups.com
Signed-off-by: Jiri Slaby

vt: clear selection before resizing

2016-11-24T15:23:21+00:00

commit 009e39ae44f4191188aeb6dfbf661b771dbbe515 upstream.

When resizing a vt its selection may exceed the new size, resulting in
an invalid memory access [1]. Clear the selection before resizing.

[1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.com

Reported-and-tested-by: Dmitry Vyukov 
Signed-off-by: Scot Doyle 
Signed-off-by: Jiri Slaby

tty: Prevent ldisc drivers from re-using stale tty fields

2016-11-18T10:41:11+00:00

commit dd42bf1197144ede075a9d4793123f7689e164bc upstream.

Line discipline drivers may mistakenly misuse ldisc-related fields
when initializing. For example, a failure to initialize tty->receive_room
in the N_GIGASET_M101 line discipline was recently found and fixed [1].
Now, the N_X25 line discipline has been discovered accessing the previous
line discipline's already-freed private data [2].

Harden the ldisc interface against misuse by initializing revelant
tty fields before instancing the new line discipline.

[1]
    commit fd98e9419d8d622a4de91f76b306af6aa627aa9c
    Author: Tilman Schmidt 
    Date:   Tue Jul 14 00:37:13 2015 +0200

    isdn/gigaset: reset tty->receive_room when attaching ser_gigaset

[2] Report from Sasha Levin 
    [  634.336761] ==================================================================
    [  634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0
    [  634.339558] Read of size 4 by task syzkaller_execu/8981
    [  634.340359] =============================================================================
    [  634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected
    ...
    [  634.405018] Call Trace:
    [  634.405277] dump_stack (lib/dump_stack.c:52)
    [  634.405775] print_trailer (mm/slub.c:655)
    [  634.406361] object_err (mm/slub.c:662)
    [  634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236)
    [  634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279)
    [  634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1))
    [  634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447)
    [  634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567)
    [  634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879)
    [  634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607)
    [  634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613)
    [  634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188)

Cc: Tilman Schmidt 
Cc: Sasha Levin 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

tty/vt/keyboard: fix OOB access in do_compute_shiftstate()

2016-08-19T07:50:49+00:00

commit 510cccb5b0c8868a2b302a0ab524da7912da648b upstream.

The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS,
which is currently 256, whereas number of keys/buttons in input device (and
therefor in key_down) is much larger - KEY_CNT - 768, and that can cause
out-of-bound access when we do

	sym = U(key_maps[0][k]);

with large 'k'.

To fix it we should not attempt iterating beyond smaller of NR_KEYS and
KEY_CNT.

Also while at it let's switch to for_each_set_bit() instead of open-coding
it.

Reported-by: Sasha Levin 
Reviewed-by: Guenter Roeck 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

2016-06-15T07:32:09+00:00

commit b8995f527aac143e83d3900ff39357651ea4e0f6 upstream.

This patch fixes the broken serial log when changing the clock source
of uart device. Before disabling the original clock source, this patch
enables the new clock source to protect the clock off state for a split second.

Signed-off-by: Chanwoo Choi 
Reviewed-by: Marek Szyprowski 
Signed-off-by: Greg Kroah-Hartman 
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Jiri Slaby

tty: vt, return error when con_startup fails

2016-06-15T07:32:08+00:00

commit 6798df4c5fe0a7e6d2065cf79649a794e5ba7114 upstream.

When csw->con_startup() fails in do_register_con_driver, we return no
error (i.e. 0). This was changed back in 2006 by commit 3e795de763.
Before that we used to return -ENODEV.

So fix the return value to be -ENODEV in that case again.

Fixes: 3e795de763 ("VT binding: Add binding/unbinding support for the VT console")
Signed-off-by: Jiri Slaby 
Reported-by: "Dan Carpenter" 
Signed-off-by: Jiri Slaby

serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock

2016-05-03T05:45:08+00:00

commit ff1cab374ad98f4b9f408525ca9c08992b4ed784 upstream.

The BSP team noticed that there is spin/mutex lock issue on sh-sci when
CPUFREQ is used.  The issue is that the notifier function may call
mutex_lock() while the spinlock is held, which can lead to a BUG().
This may happen if CPUFREQ is changed while another CPU calls
clk_get_rate().

Taking the spinlock was added to the notifier function in commit
e552de2413edad1a ("sh-sci: add platform device private data"), to
protect the list of serial ports against modification during traversal.
At that time the Common Clock Framework didn't exist yet, and
clk_get_rate() just returned clk->rate without taking a mutex.
Note that since commit d535a2305facf9b4 ("serial: sh-sci: Require a
device per port mapping."), there's no longer a list of serial ports to
traverse, and taking the spinlock became superfluous.

To fix the issue, just remove the cpufreq notifier:
  1. The notifier doesn't work correctly: all it does is update stored
     clock rates; it does not update the divider in the hardware.
     The divider will only be updated when calling sci_set_termios().
     I believe this was broken back in 2004, when the old
     drivers/char/sh-sci.c driver (where the notifier did update the
     divider) was replaced by drivers/serial/sh-sci.c (where the
     notifier just updated port->uartclk).
     Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port
     sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH]
     Remove old sh-sci driver").
  2. On modern SoCs, the sh-sci parent clock rate is no longer related
     to the CPU clock rate anyway, so using a cpufreq notifier is
     futile.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Jiri Slaby

8250: use callbacks to access UART_DLL/UART_DLM

2016-04-11T14:44:13+00:00

commit 0b41ce991052022c030fd868e03877700220b090 upstream.

Some UART HW has a single register combining UART_DLL/UART_DLM
(this was probably forgotten in the change that introduced the
callbacks, commit b32b19b8ffc05cbd3bf91c65e205f6a912ca15d9)

Fixes: b32b19b8ffc0 ("[SERIAL] 8250: set divisor register correctly ...")

Signed-off-by: Sebastian Frias 
Reviewed-by: Peter Hurley 
Signed-off-by: Jiri Slaby