Pull TTY / serial driver updates from Greg KH:
 "Here is the "big" set of tty and serial driver updates for 7.3-rc1.

  Not really all that much happened this development cycle for this
  subsystem, changes in here are:

   - removal of the ipwireless driver as it's no longer used or needed

   - new 8250_mxpcie driver added

   - qcom serial driver updates and additions

   - vt mode validation addition

   - lots of other small serial driver updates and additions

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits)
  serial: imx: serialize imx_uart_ports[] lifetime
  tty: clear cdev pointer after cdev_add() failure
  tty: skip cdev_del() when no cdev is registered
  serial: core: clear freed pointers on uart_register_driver() failure
  serial: core: do fallible allocations before the console can be registered
  serial: 8250_mxpcie: implement rx_trig_bytes callbacks via MUEx50 RTL
  serial: 8250_mxpcie: introduce per-port private data structure
  serial: 8250: allow UART drivers to override rx_trig_bytes handling
  serial: 8250_mxpcie: add break support for RS485 using MUEx50 features
  serial: 8250: allow low-level drivers to override break control
  serial: 8250_mxpcie: support serial interface mode switching
  serial: 8250_mxpcie: speed up TX using memory-mapped FIFO window
  serial: 8250_mxpcie: speed up RX using memory-mapped FIFO window
  serial: 8250_mxpcie: add custom handle_irq callback
  serial: 8250_mxpcie: offload XON/XOFF flow control to MUEx50 hardware
  serial: 8250_mxpcie: enable automatic RTS/CTS flow control
  serial: 8250_mxpcie: enable enhanced mode and program FIFO trigger levels
  serial: 8250: add Moxa MUEx50 UART port type
  serial: 8250: split Moxa PCIe serial board support out of 8250_pci
  serial: qcom-geni: Use geni_se_set_perf_level() for baud rate perf level
  ...

Pull ext2, udf, isofs, and quota updates from Jan Kara:

 - Remove deprecated quota code printing warnings about exceeded quota
   directly to console

 - Various udf & isofs hardening for handling of corrupted filesystems

 - Fix a possible data loss in udf when converting files from inline to
   out-of-line format

 - Simplify EIO error handling in ext2 xattr code

* tag 'fs_for_v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix data loss when converting inline inodes to out of line
  udf: Move udf_map_block() up
  ext2: Simplify error handling of IO error when adding xattr
  isofs: Drop support of directory entries straddling blocks
  isofs: validate directory records consistently
  quota: remove CONFIG_PRINT_QUOTA_WARNING code
  udf: Fix i_lenExtents truncation on 32-bit kernels
  isofs: release zisofs block pointer buffer head
  udf: Fix bh leak for unallocated space entries
  udf: bound lengthAllocDescs from unallocated space entry
  UDF symlink pathComponent header OOB read
  isofs: fix out-of-bounds page array access on empty zisofs block
  udf: reject VAT indexes equal to the entry count
  udf: Mark LVID buffer as uptodate before marking it dirty
  udf: avoid recursive s_alloc_mutex deadlock when freeing AED blocks
  udf: validate extent partition references in udf_current_aext()

We need the driver-core fixes in here as well to build on top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.

A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.

Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addition and removal together with their table updates so sibling
operations cannot interleave. Reject an occupied slot rather than
clobbering an active port during a duplicate-line probe.

Fixes: dbff4e9ea2e8 ("IMX UART: remove statically initialized tables")
Fixes: 9f322ad064f9 ("imx: serial: handle initialisation failure correctly")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/all/20260719162850.043B41F000E9@smtp.kernel.org
Link: https://lore.kernel.org/all/20260719222501.CB4CB1F000E9@smtp.kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260731181844.11330-6-kmehltretter@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty_cdev_add() drops the cdev reference when cdev_add() fails, but
leaves driver->cdevs[index] pointing to freed memory.
tty_unregister_device() later passes that stale pointer to cdev_del(),
causing a use-after-free.

Clear the slot after dropping the reference.

Fixes: c1a752ba2d6b ("tty: don't leak cdev in tty_cdev_add()")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Link: https://patch.msgid.link/20260731181844.11330-5-kmehltretter@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY device registration can fail before a cdev is allocated.
Serial core keeps the port so setserial can still use it, and later
removal passes the NULL cdev slot to cdev_del(), causing a NULL-pointer
dereference.

Only delete the cdev when the slot is not NULL.

Fixes: a3a10ce3429e ("Avoid usb reset crashes by making tty_io cdevs truly dynamic")
Fixes: da4c279942b0 ("serial: enable serdev support")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Link: https://patch.msgid.link/20260731181844.11330-4-kmehltretter@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uart_register_driver() leaves drv->state pointing to freed memory when
tty_alloc_driver() fails. If tty_register_driver() fails, drv->tty_driver
also retains a pointer after its reference is dropped.

Drivers that use drv->state as an "already registered" flag can then skip
registration on the next probe and pass the freed state to
uart_add_one_port().

This issue was found with failslab on QEMU's raspi1ap board by
failing registration and binding the PL011 port again.

Clear both pointers on their failure paths, as uart_unregister_driver()
already does.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 9e845abfc8a8 ("serial: fix NULL pointer dereference")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Link: https://patch.msgid.link/20260731181844.11330-3-kmehltretter@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial_core_add_one_port() allocates uport->tty_groups after
uart_configure_port(), which may register the console. If the allocation
fails, the driver unwinds the port while its console remains registered.
The earlier uport->name allocation has a related failure path that leaves
state->uart_port linked to a port being freed.

Failslab reproduced a NULL dereference in PL011 console output and a KASAN
use-after-free in i.MX console output after failed binds.

Allocate the name and tty_groups before linking the port and configuring
it. Reserve space for the optional driver attribute group because
config_port() may populate uport->attr_group during configuration.

Fixes: 266dcff03eed ("Serial: allow port drivers to have a default attribute group")
Fixes: f7048b15900f ("tty: serial_core: Add name field to uart_port struct")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260719070454.D6FA21F000E9@smtp.kernel.org/
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Link: https://patch.msgid.link/20260731181844.11330-2-kmehltretter@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The MUEx50 UART exposes a programmable RX trigger level via the RTL
register.

Implement uart_port RX trigger set/get callbacks for the mxpcie driver
and wire them up to the generic rx_trig_bytes sysfs interface. Store the
configured trigger level in the per-port private data.

Signed-off-by: Crescent Hsieh <crescentcy.hsieh@moxa.com>
Link: https://patch.msgid.link/20260731074820.735619-15-crescentcy.hsieh@moxa.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a private per-port data structure for the mxpcie driver and
replace the shared flexible array of registered lines with an array of
per-port objects.

This prepares the driver for storing per-port state needed by subsequent
features.

No functional change intended.

Signed-off-by: Crescent Hsieh <crescentcy.hsieh@moxa.com>
Link: https://patch.msgid.link/20260731074820.735619-14-crescentcy.hsieh@moxa.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>