linux-stable.git/drivers/tty/vt, branch linux-3.8.y

vt: synchronize_rcu() under spinlock is not nice...

2013-04-05T16:25:50+00:00

commit e8cd81693bbbb15db57d3c9aa7dd90eda4842874 upstream.

vcs_poll_data_free() calls unregister_vt_notifier(), which calls
atomic_notifier_chain_unregister(), which calls synchronize_rcu().
Do it *after* we'd dropped ->f_lock.

Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

fb: Yet another band-aid for fixing lockdep mess

2013-02-28T13:38:39+00:00

commit e93a9a868792ad71cdd09d75e5a02d8067473c4e upstream.

I've still got lockdep warnings even after Alan's patch, and it seems that
yet more band aids are required to paper over similar paths for
unbind_con_driver() and unregister_con_driver().  After this hack, lockdep
warnings are finally gone.

Signed-off-by: Takashi Iwai 
Cc: Alan Cox 
Cc: Florian Tobias Schandinat 
Cc: Jiri Kosina 
Tested-by: Sedat Dilek 
Signed-off-by: Andrew Morton 
Signed-off-by: Dave Airlie 
Signed-off-by: Greg Kroah-Hartman

fb: rework locking to fix lock ordering on takeover

2013-02-28T13:38:39+00:00

commit 50e244cc793d511b86adea24972f3a7264cae114 upstream.

Adjust the console layer to allow a take over call where the caller
already holds the locks.  Make the fb layer lock in order.

This is partly a band aid, the fb layer is terminally confused about the
locking rules it uses for its notifiers it seems.

[akpm@linux-foundation.org: remove stray non-ascii char, tidy comment]
[akpm@linux-foundation.org: export do_take_over_console()]
[airlied: cleanup another non-ascii char]
Signed-off-by: Alan Cox 
Cc: Florian Tobias Schandinat 
Cc: Stephen Rothwell 
Cc: Jiri Kosina 
Tested-by: Sedat Dilek 
Reviewed-by: Daniel Vetter 
Signed-off-by: Andrew Morton 
Signed-off-by: Dave Airlie 
Signed-off-by: Greg Kroah-Hartman

vgacon/vt: clear buffer attributes when we load a 512 character font (v2)

2013-02-28T13:38:34+00:00

commit 2a2483072393b27f4336ab068a1f48ca19ff1c1e upstream.

When we switch from 256->512 byte font rendering mode, it means the
current contents of the screen is being reinterpreted. The bit that holds
the high bit of the 9-bit font, may have been previously set, and thus
the new font misrenders.

The problem case we see is grub2 writes spaces with the bit set, so it
ends up with data like 0x820, which gets reinterpreted into 0x120 char
which the font translates into G with a circumflex. This flashes up on
screen at boot and is quite ugly.

A current side effect of this patch though is that any rendering on the
screen changes color to a slightly darker color, but at least the screen
no longer corrupts.

v2: as suggested by hpa, always clear the attribute space, whether we
are are going to or from 512 chars.

Signed-off-by: Dave Airlie 
Signed-off-by: Greg Kroah-Hartman

tty vt: fix character insertion overflow

2013-02-28T13:38:30+00:00

commit a883b70d8e0a88278c0a1f80753b4dc99962b541 upstream.

Commit 81732c3b2fed ("tty vt: Fix line garbage in virtual console on
command line edition") broke insert_char() in multiple ways.  Then
commit b1a925f44a3a ("tty vt: Fix a regression in command line edition")
partially fixed it.  However, the buffer being moved is still too large
and overflowing beyond the end of the current line, corrupting existing
characters on the next line.

Example test case:

echo -e "abc\nde\x1b[A\x1b[4h \x1b[4l\x1b[B"

Expected result:

ab c
de

Current result:

ab c
 e

Needless to say that this is very annoying when inserting words in the
middle of paragraphs with certain text editors.

Signed-off-by: Nicolas Pitre 
Acked-by: Jean-François Moine 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2012-12-11T22:08:47+00:00

Pull TTY/Serial merge from Greg Kroah-Hartman:
 "Here's the big tty/serial tree set of changes for 3.8-rc1.

  Contained in here is a bunch more reworks of the tty port layer from
  Jiri and bugfixes from Alan, along with a number of other tty and
  serial driver updates by the various driver authors.

  Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the
  TTY layer, which is much appreciated by me.

  All of these have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman "

Fixed up some trivial conflicts in the staging tree, due to the fwserial
driver having come in both ways (but fixed up a bit in the serial tree),
and the ioctl handling in the dgrp driver having been done slightly
differently (staging tree got that one right, and removed both
TIOCGSOFTCAR and TIOCSSOFTCAR).

* tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (146 commits)
  staging: sb105x: fix potential NULL pointer dereference in mp_chars_in_buffer()
  staging/fwserial: Remove superfluous free
  staging/fwserial: Use WARN_ONCE when port table is corrupted
  staging/fwserial: Destruct embedded tty_port on teardown
  staging/fwserial: Fix build breakage when !CONFIG_BUG
  staging: fwserial: Add TTY-over-Firewire serial driver
  drivers/tty/serial/serial_core.c: clean up HIGH_BITS_OFFSET usage
  staging: dgrp: dgrp_tty.c: Audit the return values of get/put_user()
  staging: dgrp: dgrp_tty.c: Remove the TIOCSSOFTCAR ioctl handler from dgrp driver
  serial: ifx6x60: Add modem power off function in the platform reboot process
  serial: mxs-auart: unmap the scatter list before we copy the data
  serial: mxs-auart: disable the Receive Timeout Interrupt when DMA is enabled
  serial: max310x: Setup missing "can_sleep" field for GPIO
  tty/serial: fix ifx6x60.c declaration warning
  serial: samsung: add devicetree properties for non-Exynos SoCs
  serial: samsung: fix potential soft lockup during uart write
  tty: vt: Remove redundant null check before kfree.
  tty/8250 Add check for pci_ioremap_bar failure
  tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards
  tty/8250 Add XR17D15x devices to the exar_handle_irq override
  ...

tty: vt: Remove redundant null check before kfree.

2012-11-26T23:36:38+00:00

kfree on a NULL pointer is a no-op.

Signed-off-by: Sachin Kamat 
Signed-off-by: Greg Kroah-Hartman

tty vt: Fix a regression in command line edition

2012-11-22T00:45:32+00:00

The commit 81732c3b2fede049a692e58a7ceabb6d18ffb18c
("Fix line garbage in virtual console on command line edition")
made a regression with some machines: some characters were not erased
after line edition.

This patch adjusts the number of moved characters and the size of the
region to be updated.

Signed-off-by: Jean-François Moine 
Tested-by: Krzysztof Mazur 
Signed-off-by: Greg Kroah-Hartman

drivers/tty/vt/vt_ioctl.c: Include for pm_set_vt_switch

2012-11-21T23:19:52+00:00

C files should include the header files that prototype their functions.
This keeps the types in sync, and eliminates warnings from GCC
(-Wmissing-prototypes) and Sparse (-Wdecl).

Signed-off-by: Josh Triplett 
Signed-off-by: Greg Kroah-Hartman

TTY: call tty_port_destroy in the rest of drivers

2012-11-16T01:20:58+00:00

After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

To be sure, the TTY buffers (and later some stuff) are gone along with
the tty_port, we have to call tty_port_destroy at tear-down places.
This is mostly where the structure containing a tty_port is freed.
This patch does exactly that -- put tty_port_destroy at those places.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman