linux-stable.git/drivers/tty/tty_ioctl.c, branch linux-5.4.y

tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH

2023-05-17T09:36:04+00:00

If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.

Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).

The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman 
(cherry picked from commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2)
Signed-off-by: Ilpo Järvinen 
Signed-off-by: Greg Kroah-Hartman

move compat handling of tty ioctls to tty_compat_ioctl()

2018-09-14T15:12:17+00:00

ioctls that are
	* callable only via tty_ioctl()
	* not driver-specific
	* not demand data structure conversions
	* either always need passing arg as is or always demand compat_ptr()
get intercepted in tty_compat_ioctl() from the very beginning and
redirecter to tty_ioctl().  As the result, their entries in fs/compat_ioctl.c
(some of those had been missing, BTW) got removed, as well as
n_tty_compat_ioctl_helper() (now it's never called with any cmd it would accept).

Signed-off-by: Al Viro

tty: add missing const to termios hw-change helper

2018-05-22T08:08:05+00:00

Add missing const qualifiers to the parameters of the termios hw-change
helper, which is used by a few USB serial drivers. This specifically
allows the pl2303 driver to use const arguments in one of its helper as
well.

Cc: Jiri Slaby 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold

tty: add SPDX identifiers to all remaining files in drivers/tty/

2017-11-08T12:08:12+00:00

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/tty files files with the correct SPDX license
identifier based on the license text in the file itself.  The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Jiri Slaby 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Chris Metcalf 
Cc: Jiri Kosina 
Cc: David Sterba 
Cc: James Hogan 
Cc: Rob Herring 
Cc: Eric Anholt 
Cc: Stefan Wahren 
Cc: Florian Fainelli 
Cc: Ray Jui 
Cc: Scott Branden 
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Joachim Eastwood 
Cc: Matthias Brugger 
Cc: Masahiro Yamada 
Cc: Tobias Klauser 
Cc: Russell King 
Cc: Vineet Gupta 
Cc: Richard Genoud 
Cc: Alexander Shiyan 
Cc: Baruch Siach 
Cc: "Maciej W. Rozycki" 
Cc: "Uwe Kleine-König" 
Cc: Pat Gefre 
Cc: "Guilherme G. Piccoli" 
Cc: Jason Wessel 
Cc: Vladimir Zapolskiy 
Cc: Sylvain Lemieux 
Cc: Carlo Caione 
Cc: Kevin Hilman 
Cc: Liviu Dudau 
Cc: Sudeep Holla 
Cc: Lorenzo Pieralisi 
Cc: Andy Gross 
Cc: David Brown 
Cc: "Andreas Färber" 
Cc: Kevin Cernekee 
Cc: Laxman Dewangan 
Cc: Thierry Reding 
Cc: Jonathan Hunter 
Cc: Barry Song 
Cc: Patrice Chotard 
Cc: Maxime Coquelin 
Cc: Alexandre Torgue 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Timur Tabi 
Cc: Tony Prisk 
Cc: Michal Simek 
Cc: "Sören Brinkmann" 
Cc: Thomas Gleixner 
Cc: Kate Stewart 
Cc: Philippe Ombredanne 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

tty: move baudrate handling code to a file of its own

2017-04-18T16:01:52+00:00

To allow reuse without the rest of the tty_ioctl code.
No logical changes from this patch.

Signed-off-by: Nicolas Pitre 
Signed-off-by: Greg Kroah-Hartman

sched/headers: Prepare to move signal wakeup & sigpending methods from into

2017-03-02T07:42:32+00:00

Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*'
  sed -i -e "s!$PATT!#include !" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro 
Signed-off-by: Linus Torvalds

tty: Replace TTY_THROTTLED bit tests with tty_throttled()

2016-04-30T16:26:55+00:00

Abstract TTY_THROTTLED bit tests with tty_throttled().

Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

tty: Use termios c_*flag macros

2016-01-28T22:13:44+00:00

Expressions of the form "tty->termios.c_*flag & FLAG"
are more clearly expressed with the termios flags macros,
I_FLAG(), C_FLAG(), O_FLAG(), and L_FLAG().

Convert treewide.

Signed-off-by: Peter Hurley 
Acked-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

tty: Remove func from tty_debug() macro

2015-12-14T03:59:48+00:00

Now that tty_debug() macro uses pr_debug(), the function name can
be printed when using dynamic debug; printing the function name within
the format string is redundant.

Remove the __func__ parameter and print specifier from the format string.
Add context to messages for when the function name is not printed by
dynamic debug, or when dynamic debug is not enabled.

Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman