linux-stable.git/drivers/tty/serial, branch v6.4.8 Linux kernel stable tree serial: sifive: Fix sifive_serial_console_setup() section 2023-08-03T08:26:02+00:00 Samuel Holland samuel.holland@sifive.com 2023-06-24T06:01:59+00:00 c83261b1a5c0f72ba7bde24578dc7b839f7e9a76 commit 9b8fef6345d5487137d4193bb0a0eae2203c284e upstream. This function is called indirectly from the platform driver probe function. Even if the driver is built in, it may be probed after free_initmem() due to deferral or unbinding/binding via sysfs. Thus the function cannot be marked as __init. Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART") Cc: stable <stable@kernel.org> Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20230624060159.3401369-1-samuel.holland@sifive.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9b8fef6345d5487137d4193bb0a0eae2203c284e upstream.

This function is called indirectly from the platform driver probe
function. Even if the driver is built in, it may be probed after
free_initmem() due to deferral or unbinding/binding via sysfs.
Thus the function cannot be marked as __init.

Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART")
Cc: stable <stable@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20230624060159.3401369-1-samuel.holland@sifive.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_dw: Preserve original value of DLF register 2023-08-03T08:26:02+00:00 Ruihong Luo colorsu1922@gmail.com 2023-07-13T00:42:36+00:00 12a529e625cbf4924c8234c909c23aa14ef63fa6 commit 748c5ea8b8796ae8ee80b8d3a3d940570b588d59 upstream. Preserve the original value of the Divisor Latch Fraction (DLF) register. When the DLF register is modified without preservation, it can disrupt the baudrate settings established by firmware or bootloader, leading to data corruption and the generation of unreadable or distorted characters. Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support") Cc: stable <stable@kernel.org> Signed-off-by: Ruihong Luo <colorsu1922@gmail.com> Link: https://lore.kernel.org/stable/20230713004235.35904-1-colorsu1922%40gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230713004235.35904-1-colorsu1922@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 748c5ea8b8796ae8ee80b8d3a3d940570b588d59 upstream.

Preserve the original value of the Divisor Latch Fraction (DLF) register.
When the DLF register is modified without preservation, it can disrupt
the baudrate settings established by firmware or bootloader, leading to
data corruption and the generation of unreadable or distorted characters.

Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ruihong Luo <colorsu1922@gmail.com>
Link: https://lore.kernel.org/stable/20230713004235.35904-1-colorsu1922%40gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230713004235.35904-1-colorsu1922@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: sh-sci: Fix sleeping in atomic context 2023-08-03T08:26:02+00:00 Biju Das biju.das.jz@bp.renesas.com 2023-07-04T15:48:18+00:00 867bf51492d68629e64da7ee906eb81e41fc6cbe commit 57c984f6fe20ebb9306d6e8c09b4f67fe63298c6 upstream. Fix sleeping in atomic context warning as reported by the Smatch static checker tool by replacing disable_irq->disable_irq_nosync. Reported by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 8749061be196 ("tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support") Cc: stable@kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230704154818.406913-1-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 57c984f6fe20ebb9306d6e8c09b4f67fe63298c6 upstream.

Fix sleeping in atomic context warning as reported by the Smatch static
checker tool by replacing disable_irq->disable_irq_nosync.

Reported by: Dan Carpenter <dan.carpenter@linaro.org>

Fixes: 8749061be196 ("tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support")
Cc: stable@kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230704154818.406913-1-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: qcom-geni: drop bogus runtime pm state update 2023-08-03T08:26:02+00:00 Johan Hovold johan+linaro@kernel.org 2023-07-13T14:57:41+00:00 7ceb28ca8a6756824ff03871250746080add89cb commit 4dd8752a14ca0303fbdf0a6c68ff65f0a50bd2fa upstream. The runtime PM state should not be changed by drivers that do not implement runtime PM even if it happens to work around a bug in PM core. With the wake irq arming now fixed, drop the bogus runtime PM state update which left the device in active state (and could potentially prevent a parent device from suspending). Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") Cc: 5.6+ <stable@vger.kernel.org> # 5.6+ Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4dd8752a14ca0303fbdf0a6c68ff65f0a50bd2fa upstream.

The runtime PM state should not be changed by drivers that do not
implement runtime PM even if it happens to work around a bug in PM core.

With the wake irq arming now fixed, drop the bogus runtime PM state
update which left the device in active state (and could potentially
prevent a parent device from suspending).

Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup")
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "8250: add support for ASIX devices with a FIFO bug" 2023-07-23T11:54:08+00:00 Jiaqing Zhao jiaqing.zhao@linux.intel.com 2023-06-19T15:57:44+00:00 ed60e0031cbea6e225dc9df84c3154b86958801b commit a82d62f708545d22859584e0e0620da8e3759bbc upstream. This reverts commit eb26dfe8aa7eeb5a5aa0b7574550125f8aa4c3b3. Commit eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX (0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in 1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always takes precedence over the ASIX entry even since it was initially merged, code in that commit is always unreachable. In my tests, adding the FIFO workaround to pci_netmos_init() makes no difference, and the vendor driver also does not have such workaround. Given that the code was never used for over a decade, it's safe to revert it. Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on their newer AX99100 PCIe serial controllers released on 2016. The FIFO workaround should not be intended for these newer controllers, and it was never implemented in vendor driver. Fixes: eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") Cc: stable <stable@kernel.org> Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a82d62f708545d22859584e0e0620da8e3759bbc upstream.

This reverts commit eb26dfe8aa7eeb5a5aa0b7574550125f8aa4c3b3.

Commit eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO
bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX
(0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in
1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged
on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always
takes precedence over the ASIX entry even since it was initially
merged, code in that commit is always unreachable.

In my tests, adding the FIFO workaround to pci_netmos_init() makes no
difference, and the vendor driver also does not have such workaround.
Given that the code was never used for over a decade, it's safe to
revert it.

Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on
their newer AX99100 PCIe serial controllers released on 2016. The FIFO
workaround should not be intended for these newer controllers, and it
was never implemented in vendor driver.

Fixes: eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug")
Cc: stable <stable@kernel.org>
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: imx: fix rs485 rx after tx 2023-07-23T11:54:05+00:00 Martin Fuzzey martin.fuzzey@flowbird.group 2023-06-16T10:47:23+00:00 2e97d6ecc55f16813360850faa892090089c4096 commit 639949a7031e04c59ec91614eceb9543e9120f43 upstream. Since commit 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") RS485 reception no longer works after a transmission. The following scenario shows the problem: 1) Open a port in RS485 mode 2) Receive data from remote (OK) 3) Transmit data to remote (OK) 4) Receive data from remote (Nothing received) In RS485 mode, imx_uart_start_tx() calls imx_uart_stop_rx() and, when the transmission is complete, imx_uart_stop_tx() calls imx_uart_start_rx(). Since the above commit imx_uart_stop_rx() now sets the loopback bit but imx_uart_start_rx() does not clear it causing the hardware to remain in loopback mode and not receive external data. Fix this by moving the existing loopback disable code to a helper function and calling it from imx_uart_start_rx() too. Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") Cc: stable@vger.kernel.org Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230616104838.2729694-1-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 639949a7031e04c59ec91614eceb9543e9120f43 upstream.

Since commit 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal
active high") RS485 reception no longer works after a transmission.

The following scenario shows the problem:
	1) Open a port in RS485 mode
	2) Receive data from remote (OK)
	3) Transmit data to remote (OK)
	4) Receive data from remote (Nothing received)

In RS485 mode, imx_uart_start_tx() calls imx_uart_stop_rx() and, when the
transmission is complete, imx_uart_stop_tx() calls imx_uart_start_rx().

Since the above commit imx_uart_stop_rx() now sets the loopback bit but
imx_uart_start_rx() does not clear it causing the hardware to remain in
loopback mode and not receive external data.

Fix this by moving the existing loopback disable code to a helper function
and calling it from imx_uart_start_rx() too.

Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230616104838.2729694-1-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk 2023-07-23T11:54:05+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2023-06-10T15:59:26+00:00 1f426293fef1c13742b2a685bf7e363f51f6ee03 commit 832e231cff476102e8204a9e7bddfe5c6154a375 upstream. When the best clk is searched, we iterate over all possible clk. If we find a better match, the previous one, if any, needs to be freed. If a better match has already been found, we still need to free the new one, otherwise it leaks. Cc: <stable@vger.kernel.org> # v3.3+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Message-ID: <cf3e0053d2fc7391b2d906a86cd01a5ef15fb9dc.1686412569.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 832e231cff476102e8204a9e7bddfe5c6154a375 upstream.

When the best clk is searched, we iterate over all possible clk.

If we find a better match, the previous one, if any, needs to be freed.
If a better match has already been found, we still need to free the new
one, otherwise it leaks.

Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <cf3e0053d2fc7391b2d906a86cd01a5ef15fb9dc.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error 2023-07-23T11:54:05+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2023-06-10T15:59:25+00:00 1694fc8ad734e2909a9e40d2be03cc4423e0bee6 commit a9c09546e903f1068acfa38e1ee18bded7114b37 upstream. If clk_get_rate() fails, the clk that has just been allocated needs to be freed. Cc: <stable@vger.kernel.org> # v3.3+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Message-ID: <e4baf6039368f52e5a5453982ddcb9a330fc689e.1686412569.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a9c09546e903f1068acfa38e1ee18bded7114b37 upstream.

If clk_get_rate() fails, the clk that has just been allocated needs to be
freed.

Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <e4baf6039368f52e5a5453982ddcb9a330fc689e.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: atmel: don't enable IRQs prematurely 2023-07-23T11:54:05+00:00 Dan Carpenter dan.carpenter@linaro.org 2023-06-19T09:45:17+00:00 607fa9311235a16e1d0ef3d598642ea2e00bcde4 commit 27a826837ec9a3e94cc44bd9328b8289b0fcecd7 upstream. The atmel_complete_tx_dma() function disables IRQs at the start of the function by calling spin_lock_irqsave(&port->lock, flags); There is no need to disable them a second time using the spin_lock_irq() function and, in fact, doing so is a bug because it will enable IRQs prematurely when we call spin_unlock_irq(). Just use spin_lock/unlock() instead without disabling or enabling IRQs. Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/cb7c39a9-c004-4673-92e1-be4e34b85368@moroto.mountain Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 27a826837ec9a3e94cc44bd9328b8289b0fcecd7 upstream.

The atmel_complete_tx_dma() function disables IRQs at the start
of the function by calling spin_lock_irqsave(&port->lock, flags);
There is no need to disable them a second time using the
spin_lock_irq() function and, in fact, doing so is a bug because
it will enable IRQs prematurely when we call spin_unlock_irq().

Just use spin_lock/unlock() instead without disabling or enabling
IRQs.

Fixes: 08f738be88bb ("serial: at91: add tx dma support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/cb7c39a9-c004-4673-92e1-be4e34b85368@moroto.mountain
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform 2023-07-19T14:37:02+00:00 Sherry Sun sherry.sun@nxp.com 2023-06-19T08:06:13+00:00 90583977cae9deb9475794e89d83d928e358ede5 commit e0edfdc15863ec80a1d9ac6e174dbccc00206dd0 upstream. Add earlycon support for imx8ulp platform. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230619080613.16522-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e0edfdc15863ec80a1d9ac6e174dbccc00206dd0 upstream.

Add earlycon support for imx8ulp platform.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230619080613.16522-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>