linux-stable.git/drivers/tty/serial, branch v6.3.4 Linux kernel stable tree serial: qcom-geni: fix enabling deactivated interrupt 2023-05-24T16:30:22+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2023-05-05T15:23:01+00:00 a599be1bb34690dffd8dd1a4e555bf9efc68bb92 commit 5f949f140f73696f64acb89a1f16ff9153d017e0 upstream. The driver have a race, experienced only with PREEMPT_RT patchset: CPU0 | CPU1 ================================================================== qcom_geni_serial_probe | uart_add_one_port | | serdev_drv_probe | qca_serdev_probe | serdev_device_open | uart_open | uart_startup | qcom_geni_serial_startup | enable_irq | __irq_startup | WARN_ON() | IRQ not activated request_threaded_irq | irq_domain_activate_irq | The warning: 894000.serial: ttyHS1 at MMIO 0x894000 (irq = 144, base_baud = 0) is a MSM serial serial0: tty port ttyHS1 registered WARNING: CPU: 7 PID: 107 at kernel/irq/chip.c:241 __irq_startup+0x78/0xd8 ... qcom_geni_serial 894000.serial: serial engine reports 0 RX bytes in! Adding UART port triggers probe of child serial devices - serdev and eventually Qualcomm Bluetooth hci_qca driver. This opens UART port which enables the interrupt before it got activated in request_threaded_irq(). The issue originates in commit f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") and discussion on mailing list [1]. However the above commit does not explain why the uart_add_one_port() is moved above requesting interrupt. [1] https://lore.kernel.org/all/5d9f3dfa.1c69fb81.84c4b.30bf@mx.google.com/ Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") Cc: <stable@vger.kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230505152301.2181270-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5f949f140f73696f64acb89a1f16ff9153d017e0 upstream.

The driver have a race, experienced only with PREEMPT_RT patchset:

CPU0                         | CPU1
==================================================================
qcom_geni_serial_probe       |
  uart_add_one_port          |
                             | serdev_drv_probe
                             |   qca_serdev_probe
                             |     serdev_device_open
                             |       uart_open
                             |         uart_startup
                             |           qcom_geni_serial_startup
                             |             enable_irq
                             |               __irq_startup
                             |                 WARN_ON()
                             |                 IRQ not activated
  request_threaded_irq       |
    irq_domain_activate_irq  |

The warning:

  894000.serial: ttyHS1 at MMIO 0x894000 (irq = 144, base_baud = 0) is a MSM
  serial serial0: tty port ttyHS1 registered
  WARNING: CPU: 7 PID: 107 at kernel/irq/chip.c:241 __irq_startup+0x78/0xd8
  ...
  qcom_geni_serial 894000.serial: serial engine reports 0 RX bytes in!

Adding UART port triggers probe of child serial devices - serdev and
eventually Qualcomm Bluetooth hci_qca driver.  This opens UART port
which enables the interrupt before it got activated in
request_threaded_irq().  The issue originates in commit f3974413cf02
("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") and discussion on
mailing list [1].  However the above commit does not explain why the
uart_add_one_port() is moved above requesting interrupt.

[1] https://lore.kernel.org/all/5d9f3dfa.1c69fb81.84c4b.30bf@mx.google.com/

Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup")
Cc: <stable@vger.kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230505152301.2181270-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_exar: Add support for USR298x PCI Modems 2023-05-24T16:30:22+00:00 Andrew Davis afd@ti.com 2023-04-20T16:02:09+00:00 e3e52010822fcb005ff1d39745578d5e7292e0d0 commit 95d698869b404772cc8b72560df71548491c10bc upstream. Possibly the last PCI controller-based (i.e. not a soft/winmodem) dial-up modem one can still buy. Looks to have a stock XR17C154 PCI UART chip for communication, but for some reason when provisioning the PCI IDs they swapped the vendor and subvendor IDs. Otherwise this card would have worked out of the box. Searching online, some folks seem to not have this issue and others do, so it is possible only some batches of cards have this error. Create a new macro to handle the switched IDs and add support here. Signed-off-by: Andrew Davis <afd@ti.com> Cc: stable <stable@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230420160209.28221-1-afd@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 95d698869b404772cc8b72560df71548491c10bc upstream.

Possibly the last PCI controller-based (i.e. not a soft/winmodem)
dial-up modem one can still buy.

Looks to have a stock XR17C154 PCI UART chip for communication, but for
some reason when provisioning the PCI IDs they swapped the vendor and
subvendor IDs. Otherwise this card would have worked out of the box.

Searching online, some folks seem to not have this issue and others do,
so it is possible only some batches of cards have this error.

Create a new macro to handle the switched IDs and add support here.

Signed-off-by: Andrew Davis <afd@ti.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230420160209.28221-1-afd@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: Add support for Advantech PCI-1611U card 2023-05-24T16:30:22+00:00 Vitaliy Tomin tomin@iszf.irk.ru 2023-04-23T03:45:12+00:00 bb6cc3e05c2c36e75147933fff189ea8ae6b1621 commit d2b00516de0e1d696724247098f6733a6ea53908 upstream. Add support for Advantech PCI-1611U card Advantech provides opensource drivers for this and many others card based on legacy copy of 8250_pci driver called adv950 https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ It is hard to maintain to run as out of tree module on newer kernels. Just adding PCI ID to kernel 8250_pci works perfect. Signed-off-by: Vitaliy Tomin <tomin@iszf.irk.ru> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230423034512.2671157-1-tomin@iszf.irk.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d2b00516de0e1d696724247098f6733a6ea53908 upstream.

Add support for Advantech PCI-1611U card

Advantech provides opensource drivers for this and many others card
based on legacy copy of 8250_pci driver called adv950

https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ

It is hard to maintain to run as out of tree module on newer kernels.
Just adding PCI ID to kernel 8250_pci works perfect.

Signed-off-by: Vitaliy Tomin <tomin@iszf.irk.ru>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230423034512.2671157-1-tomin@iszf.irk.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_bcm7271: fix leak in `brcmuart_probe` 2023-05-24T16:30:15+00:00 Doug Berger opendmb@gmail.com 2023-04-27T18:19:16+00:00 56a81445b8e4b8906d557518c5dae3ddbb447d1e [ Upstream commit f264f2f6f4788dc031cef60a0cf2881902736709 ] Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Reported-by: XuDong Liu <m202071377@hust.edu.cn> Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/ Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230427181916.2983697-3-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f264f2f6f4788dc031cef60a0cf2881902736709 ]

Smatch reports:
drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn:
'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032.

The issue is fixed by using a managed clock.

Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Reported-by: XuDong Liu <m202071377@hust.edu.cn>
Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230427181916.2983697-3-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250_bcm7271: balance clk_enable calls 2023-05-24T16:30:15+00:00 Doug Berger opendmb@gmail.com 2023-04-27T18:19:15+00:00 5ea03de0199a3efa25724241624f0b17a738f436 [ Upstream commit 8a3b5477256a54ae4a470dcebbcf8cdc18e4696d ] The sw_baud clock must be disabled when the device driver is not connected to the device. This now occurs when probe fails and upon remove. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Reported-by: XuDong Liu <m202071377@hust.edu.cn> Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/ Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230427181916.2983697-2-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8a3b5477256a54ae4a470dcebbcf8cdc18e4696d ]

The sw_baud clock must be disabled when the device driver is not
connected to the device. This now occurs when probe fails and
upon remove.

Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Reported-by: XuDong Liu <m202071377@hust.edu.cn>
Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230427181916.2983697-2-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: arc_uart: fix of_iomap leak in `arc_serial_probe` 2023-05-24T16:30:15+00:00 Ke Zhang m202171830@hust.edu.cn 2023-04-28T03:16:36+00:00 40a462313ba4f337a2b419e7fb4a670f3dd95e14 [ Upstream commit 8ab5fc55d7f65d58a3c3aeadf11bdf60267cd2bd ] Smatch reports: drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn: 'port->membase' from of_iomap() not released on lines: 631. In arc_serial_probe(), if uart_add_one_port() fails, port->membase is not released, which would cause a resource leak. To fix this, I replace of_iomap with devm_platform_ioremap_resource. Fixes: 8dbe1d5e09a7 ("serial/arc: inline the probe helper") Signed-off-by: Ke Zhang <m202171830@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230428031636.44642-1-m202171830@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8ab5fc55d7f65d58a3c3aeadf11bdf60267cd2bd ]

Smatch reports:

drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn:
'port->membase' from of_iomap() not released on lines: 631.

In arc_serial_probe(), if uart_add_one_port() fails,
port->membase is not released, which would cause a resource leak.

To fix this, I replace of_iomap with devm_platform_ioremap_resource.

Fixes: 8dbe1d5e09a7 ("serial/arc: inline the probe helper")
Signed-off-by: Ke Zhang <m202171830@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230428031636.44642-1-m202171830@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250: Reinit port->pm on port specific driver unbind 2023-05-24T16:30:09+00:00 Tony Lindgren tony@atomide.com 2023-04-18T10:14:06+00:00 8e596aed5f2f98cf3e6e98d6fe1d689f4a319308 [ Upstream commit 04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ] When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix the issue by calling serial8250_set_defaults() in serial8250_unregister_port(). This will set the port back to using the serial8250 default functions, and sets the port->pm to point to serial8250_pm. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ]

When we unbind a serial port hardware specific 8250 driver, the generic
serial8250 driver takes over the port. After that we see an oops about 10
seconds later. This can produce the following at least on some TI SoCs:

Unhandled fault: imprecise external abort (0x1406)
Internal error: : 1406 [#1] SMP ARM

Turns out that we may still have the serial port hardware specific driver
port->pm in use, and serial8250_pm() tries to call it after the port
specific driver is gone:

serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base]
uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base]
uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c
__tty_hangup.part.0 from disassociate_ctty+0x154/0x20c
disassociate_ctty from do_exit+0x744/0xaac
do_exit from do_group_exit+0x40/0x8c
do_group_exit from __wake_up_parent+0x0/0x1c

Let's fix the issue by calling serial8250_set_defaults() in
serial8250_unregister_port(). This will set the port back to using
the serial8250 default functions, and sets the port->pm to point to
serial8250_pm.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250: Add missing wakeup event reporting 2023-05-11T14:17:28+00:00 Florian Fainelli f.fainelli@gmail.com 2023-04-14T17:02:39+00:00 f5fd2fd999b364801e9790c6f69f3fe3f40ed60f [ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ] An 8250 UART configured as a wake-up source would not have reported itself through sysfs as being the source of wake-up, correct that. Fixes: b3b708fa2780 ("wake up from a serial port") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ]

An 8250 UART configured as a wake-up source would not have reported
itself through sysfs as being the source of wake-up, correct that.

Fixes: b3b708fa2780 ("wake up from a serial port")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: serial: fsl_lpuart: adjust buffer length to the intended size 2023-05-11T14:17:28+00:00 Shenwei Wang shenwei.wang@nxp.com 2023-04-10T19:55:55+00:00 c6578bb745e22d6171663bb85ed367ad4075a821 [ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ] Based on the fls function definition provided below, we should not subtract 1 to obtain the correct buffer length: fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20230410195555.1003900-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ]

Based on the fls function definition provided below, we should not
subtract 1 to obtain the correct buffer length:

fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.

Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230410195555.1003900-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250_bcm7271: Fix arbitration handling 2023-05-11T14:17:24+00:00 Doug Berger opendmb@gmail.com 2023-03-09T19:02:24+00:00 149b5f036faeecd9a23fa5d7c709e66958468dc1 [ Upstream commit 15ac1122fd6d4bf408a03e6f23c7ad4f60b22f9e ] The arbitration of the UART DMA is mishandled for a few exceptional cases when probing and releasing the driver. It is possible that the DMA register spaces are not defined in device tree for an instance of the driver, so attempts to access the registers in brcmuart_arbitration() would use NULL pointers. It is also possible for the probe function to return an error while still holding the UART DMA. This would prevent the UART DMA from being claimed by an instance that could use it. These errors are addressed by only releasing the UART DMA if it is held by this instance (i.e. priv->dma_enabled == 1) and directing early error paths in probe to this common release_dma handling. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230309190224.687380-1-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 15ac1122fd6d4bf408a03e6f23c7ad4f60b22f9e ]

The arbitration of the UART DMA is mishandled for a few
exceptional cases when probing and releasing the driver.

It is possible that the DMA register spaces are not defined in
device tree for an instance of the driver, so attempts to access
the registers in brcmuart_arbitration() would use NULL pointers.

It is also possible for the probe function to return an error
while still holding the UART DMA. This would prevent the UART
DMA from being claimed by an instance that could use it.

These errors are addressed by only releasing the UART DMA if it
is held by this instance (i.e. priv->dma_enabled == 1) and
directing early error paths in probe to this common release_dma
handling.

Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230309190224.687380-1-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>