linux-stable.git/drivers/tty/serial, branch v5.4.60

serial: 8250_mtk: Fix high-speed baud rates clamping

2020-07-29T08:18:43+00:00

commit 551e553f0d4ab623e2a6f424ab5834f9c7b5229c upstream.

Commit 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250
port") fixed limits of a baud rate setting for a generic 8250 port.
In other words since that commit the baud rate has been permitted to be
within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
normal for a standard 8250 UART port. But there are custom 8250 ports,
which provide extended baud rate limits. In particular the Mediatek 8250
port can work with baud rates up to "uartclk" speed.

Normally that and any other peculiarity is supposed to be handled in a
custom set_termios() callback implemented in the vendor-specific
8250-port glue-driver. Currently that is how it's done for the most of
the vendor-specific 8250 ports, but for some reason for Mediatek a
solution has been spread out to both the glue-driver and to the generic
8250-port code. Due to that a bug has been introduced, which permitted the
extended baud rate limit for all even for standard 8250-ports. The bug
has been fixed by the commit 7b668c064ec3 ("serial: 8250: Fix max baud
limit in generic 8250 port") by narrowing the baud rates limit back down to
the normal bounds. Unfortunately by doing so we also broke the
Mediatek-specific extended bauds feature.

A fix of the problem described above is twofold. First since we can't get
back the extended baud rate limits feature to the generic set_termios()
function and that method supports only a standard baud rates range, the
requested baud rate must be locally stored before calling it and then
restored back to the new termios structure after the generic set_termios()
finished its magic business. By doing so we still use the
serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
while the extended baud rate setting procedure will be performed later in
the custom Mediatek-specific set_termios() callback. Second since a true
baud rate is now fully calculated in the custom set_termios() method we
need to locally update the port timeout by calling the
uart_update_timeout() function. After the fixes described above are
implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
get back to normally working with extended baud rates.

Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com

Fixes: 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250 port")
Reported-by: Daniel Winkler 
Signed-off-by: Serge Semin 
Cc: stable 
Tested-by: Claire Chang 
Link: https://lore.kernel.org/r/20200714124113.20918-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Greg Kroah-Hartman

serial: 8250: fix null-ptr-deref in serial8250_start_tx()

2020-07-29T08:18:42+00:00

commit f4c23a140d80ef5e6d3d1f8f57007649014b60fa upstream.

I got null-ptr-deref in serial8250_start_tx():

[   78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[   78.123778] Mem abort info:
[   78.126560]   ESR = 0x86000007
[   78.129603]   EC = 0x21: IABT (current EL), IL = 32 bits
[   78.134891]   SET = 0, FnV = 0
[   78.137933]   EA = 0, S1PTW = 0
[   78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600
[   78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000
[   78.160029] Internal error: Oops: 86000007 [#1] SMP
[   78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd
[   78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48
[   78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020
[   78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[   78.228435] pc : 0x0
[   78.230618] lr : serial8250_start_tx+0x160/0x260
[   78.235215] sp : ffff800062eefb80
[   78.238517] x29: ffff800062eefb80 x28: 0000000000000fff
[   78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000
[   78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000
[   78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002
[   78.259679] x21: 0000000000000001 x20: 0000000000000000
[   78.264969] x19: ffffa688827eecc8 x18: 0000000000000000
[   78.270259] x17: 0000000000000000 x16: 0000000000000000
[   78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6
[   78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539
[   78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0
[   78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88
[   78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000
[   78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8
[   78.307292] x3 : 0000000000000000 x2 : 0000000000000002
[   78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8
[   78.317873] Call trace:
[   78.320312]  0x0
[   78.322147]  __uart_start.isra.9+0x64/0x78
[   78.326229]  uart_start+0xb8/0x1c8
[   78.329620]  uart_flush_chars+0x24/0x30
[   78.333442]  n_tty_receive_buf_common+0x7b0/0xc30
[   78.338128]  n_tty_receive_buf+0x44/0x2c8
[   78.342122]  tty_ioctl+0x348/0x11f8
[   78.345599]  ksys_ioctl+0xd8/0xf8
[   78.348903]  __arm64_sys_ioctl+0x2c/0xc8
[   78.352812]  el0_svc_common.constprop.2+0x88/0x1b0
[   78.357583]  do_el0_svc+0x44/0xd0
[   78.360887]  el0_sync_handler+0x14c/0x1d0
[   78.364880]  el0_sync+0x140/0x180
[   78.368185] Code: bad PC value

SERIAL_PORT_DFNS is not defined on each arch, if it's not defined,
serial8250_set_defaults() won't be called in serial8250_isa_init_ports(),
so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref.
Fix this problem by calling serial8250_set_defaults() after init uart port.

Signed-off-by: Yang Yingliang 
Cc: stable 
Link: https://lore.kernel.org/r/20200721143852.4058352-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman

serial: tegra: fix CREAD handling for PIO

2020-07-29T08:18:42+00:00

commit b374c562ee7ab3f3a1daf959c01868bae761571c upstream.

Commit 33ae787b74fc ("serial: tegra: add support to ignore read") added
support for dropping input in case CREAD isn't set, but for PIO the
ignore_status_mask wasn't checked until after the character had been
put in the receive buffer.

Note that the NULL tty-port test is bogus and will be removed by a
follow-on patch.

Fixes: 33ae787b74fc ("serial: tegra: add support to ignore read")
Cc: stable      # 5.4
Cc: Shardar Shariff Md 
Cc: Krishna Yarlagadda 
Signed-off-by: Johan Hovold 
Acked-by: Thierry Reding 
Link: https://lore.kernel.org/r/20200710135947.2737-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

tty: xilinx_uartps: Really fix id assignment

2020-07-29T08:18:41+00:00

commit 22a82fa7d6c3e16d56a036b1fa697a39b954adf0 upstream.

The problems started with the revert (18cc7ac8a28e28). The
cdns_uart_console.index is statically assigned -1. When the port is
registered, Linux assigns consecutive numbers to it. It turned out that
when using ttyPS1 as console, the index is not updated as we are reusing
the same cdns_uart_console instance for multiple ports. When registering
ttyPS0, it gets updated from -1 to 0, but when registering ttyPS1, it
already is 0 and not updated.

That led to 2ae11c46d5fdc4. It assigns the index prior to registering
the uart_driver once. Unfortunately, that ended up breaking the
situation where the probe order does not match the id order. When using
the same device tree for both uboot and linux, it is important that the
serial0 alias points to the console. So some boards reverse those
aliases. This was reported by Jan Kiszka. The proposed fix was reverting
the index assignment and going back to the previous iteration.

However such a reversed assignement (serial0 -> uart1, serial1 -> uart0)
was already partially broken by the revert (18cc7ac8a28e28). While the
ttyPS device works, the kmsg connection is already broken and kernel
messages go missing. Reverting the id assignment does not fix this.

>From the xilinx_uartps driver pov (after reverting the refactoring
commits), there can be only one console. This manifests in static
variables console_pprt and cdns_uart_console. These variables are not
properly linked and can go out of sync. The cdns_uart_console.index is
important for uart_add_one_port. We call that function for each port -
one of which hopefully is the console. If it isn't, the CON_ENABLED flag
is not set and console_port is cleared. The next cdns_uart_probe call
then tries to register the next port using that same cdns_uart_console.

It is important that console_port and cdns_uart_console (and its index
in particular) stay in sync. The index assignment implemented by
Shubhrajyoti Datta is correct in principle. It just may have to happen a
second time if the first cdns_uart_probe call didn't encounter the
console device. And we shouldn't change the index once the console uart
is registered.

Reported-by: Shubhrajyoti Datta 
Reported-by: Jan Kiszka 
Link: https://lore.kernel.org/linux-serial/f4092727-d8f5-5f91-2c9f-76643aace993@siemens.com/
Fixes: 18cc7ac8a28e28 ("Revert "serial: uartps: Register own uart console and driver structures"")
Fixes: 2ae11c46d5fdc4 ("tty: xilinx_uartps: Fix missing id assignment to the console")
Fixes: 76ed2e10579671 ("Revert "tty: xilinx_uartps: Fix missing id assignment to the console"")
Signed-off-by: Helmut Grohne 
Cc: stable 
Link: https://lore.kernel.org/r/20200713073227.GA3805@laureti-dev
Signed-off-by: Greg Kroah-Hartman

serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X

2020-07-29T08:18:35+00:00

[ Upstream commit 5fdbe136ae19ab751daaa4d08d9a42f3e30d17f9 ]

Sealevel XR17V35X based devices are inoperable on kernel versions
4.11 and above due to a change in the GPIO preconfiguration introduced in
commit
7dea8165f1d. This patch fixes this by preconfiguring the GPIO on Sealevel
cards to the value (0x00) used prior to commit 7dea8165f1d

With GPIOs preconfigured as per commit 7dea8165f1d all ports on
Sealevel XR17V35X based devices become stuck in high impedance
mode, regardless of dip-switch or software configuration. This
causes the device to become effectively unusable. This patch (in
various forms) has been distributed to our customers and no issues
related to it have been reported.

Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output")
Signed-off-by: Matthew Howell 
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2007221605270.13247@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: mxs-auart: add missed iounmap() in probe failure and remove

2020-07-22T07:33:11+00:00

commit d8edf8eb5f6e921fe6389f96d2cd05862730a6ff upstream.

This driver calls ioremap() in probe, but it misses calling iounmap() in
probe's error handler and remove.
Add the missed calls to fix it.

Fixes: 47d37d6f94cc ("serial: Add auart driver for i.MX23/28")
Signed-off-by: Chuhong Yuan 
Cc: stable 
Link: https://lore.kernel.org/r/20200709135608.68290-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman

Revert "tty: xilinx_uartps: Fix missing id assignment to the console"

2020-07-22T07:33:11+00:00

commit 76ed2e105796710cf5b8a4ba43c81eceed948b70 upstream.

This reverts commit 2ae11c46d5fdc46cb396e35911c713d271056d35.

It turned out to break the ultra96-rev1, e.g., which uses uart1 as
serial0 (and stdout-path = "serial0:115200n8").

Fixes: 2ae11c46d5fd ("tty: xilinx_uartps: Fix missing id assignment to the console")
Cc: stable 
Signed-off-by: Jan Kiszka 
Reviewed-by: Michal Simek 
Tested-by: Michal Simek 
Link: https://lore.kernel.org/r/f4092727-d8f5-5f91-2c9f-76643aace993@siemens.com
Signed-off-by: Greg Kroah-Hartman

serial: amba-pl011: Make sure we initialize the port.lock spinlock

2020-06-24T15:50:24+00:00

[ Upstream commit 8508f4cba308f785b2fd4b8c38849c117b407297 ]

Valentine reported seeing:

[    3.626638] INFO: trying to register non-static key.
[    3.626639] the code is fine but needs lockdep annotation.
[    3.626640] turning off the locking correctness validator.
[    3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116
[    3.626646] Hardware name: HiKey960 (DT)
[    3.626656] Workqueue: events deferred_probe_work_func
[    3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
[    3.640220] Call trace:
[    3.640225]  dump_backtrace+0x0/0x1b8
[    3.640227]  show_stack+0x20/0x30
[    3.640230]  dump_stack+0xec/0x158
[    3.640234]  register_lock_class+0x598/0x5c0
[    3.640235]  __lock_acquire+0x80/0x16c0
[    3.640236]  lock_acquire+0xf4/0x4a0
[    3.640241]  _raw_spin_lock_irqsave+0x70/0xa8
[    3.640245]  uart_add_one_port+0x388/0x4b8
[    3.640248]  pl011_register_port+0x70/0xf0
[    3.640250]  pl011_probe+0x184/0x1b8
[    3.640254]  amba_probe+0xdc/0x180
[    3.640256]  really_probe+0xe0/0x338
[    3.640257]  driver_probe_device+0x60/0xf8
[    3.640259]  __device_attach_driver+0x8c/0xd0
[    3.640260]  bus_for_each_drv+0x84/0xd8
[    3.640261]  __device_attach+0xe4/0x140
[    3.640263]  device_initial_probe+0x1c/0x28
[    3.640265]  bus_probe_device+0xa4/0xb0
[    3.640266]  deferred_probe_work_func+0x7c/0xb8
[    3.640269]  process_one_work+0x2c0/0x768
[    3.640271]  worker_thread+0x4c/0x498
[    3.640272]  kthread+0x14c/0x158
[    3.640275]  ret_from_fork+0x10/0x1c

Which seems to be due to the fact that after allocating the uap
structure, nothing initializes the spinlock.

Its a little confusing, as uart_port_spin_lock_init() is one
place where the lock is supposed to be initialized, but it has
an exception for the case where the port is a console.

This makes it seem like a deeper fix is needed to properly
register the console, but I'm not sure what that entails, and
Andy suggested that this approach is less invasive.

Thus, this patch resolves the issue by initializing the spinlock
in the driver, and resolves the resulting warning.

Cc: Andy Shevchenko 
Cc: Russell King 
Cc: Jiri Slaby 
Cc: linux-serial@vger.kernel.org
Reported-by: Valentin Schneider 
Reviewed-by: Andy Shevchenko 
Signed-off-by: John Stultz 
Reviewed-and-tested-by: Valentin Schneider 
Link: https://lore.kernel.org/r/20200428184050.6501-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: 8250: Fix max baud limit in generic 8250 port

2020-06-24T15:50:13+00:00

[ Upstream commit 7b668c064ec33f3d687c3a413d05e355172e6c92 ]

Standard 8250 UART ports are designed in a way so they can communicate
with baud rates up to 1/16 of a reference frequency. It's expected from
most of the currently supported UART controllers. That's why the former
version of serial8250_get_baud_rate() method called uart_get_baud_rate()
with min and max baud rates passed as (port->uartclk / 16 / UART_DIV_MAX)
and ((port->uartclk + tolerance) / 16) respectively. Doing otherwise, like
it was suggested in commit ("serial: 8250_mtk: support big baud rate."),
caused acceptance of bauds, which was higher than the normal UART
controllers actually supported. As a result if some user-space program
requested to set a baud greater than (uartclk / 16) it would have been
permitted without truncation, but then serial8250_get_divisor(baud)
(which calls uart_get_divisor() to get the reference clock divisor) would
have returned a zero divisor. Setting zero divisor will cause an
unpredictable effect varying from chip to chip. In case of DW APB UART the
communications just stop.

Lets fix this problem by getting back the limitation of (uartclk +
tolerance) / 16 maximum baud supported by the generic 8250 port. Mediatek
8250 UART ports driver developer shouldn't have touched it in the first
place  notably seeing he already provided a custom version of set_termios()
callback in that glue-driver which took into account the extended baud
rate values and accordingly updated the standard and vendor-specific
divisor latch registers anyway.

Fixes: 81bb549fdf14 ("serial: 8250_mtk: support big baud rate.")
Signed-off-by: Serge Semin 
Cc: Alexey Malahov 
Cc: Thomas Bogendoerfer 
Cc: Paul Burton 
Cc: Ralf Baechle 
Cc: Arnd Bergmann 
Cc: Long Cheng 
Cc: Andy Shevchenko 
Cc: Maxime Ripard 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Russell King 
Cc: linux-mips@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200506233136.11842-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: 8250: Avoid error message on reprobe

2020-06-22T07:31:18+00:00

commit e0a851fe6b9b619527bd928aa93caaddd003f70c upstream.

If the call to uart_add_one_port() in serial8250_register_8250_port()
fails, a half-initialized entry in the serial_8250ports[] array is left
behind.

A subsequent reprobe of the same serial port causes that entry to be
reused.  Because uart->port.dev is set, uart_remove_one_port() is called
for the half-initialized entry and bails out with an error message:

bcm2835-aux-uart 3f215040.serial: Removing wrong port: (null) != (ptrval)

The same happens on failure of mctrl_gpio_init() since commit
4a96895f74c9 ("tty/serial/8250: use mctrl_gpio helpers").

Fix by zeroing the uart->port.dev pointer in the probe error path.

The bug was introduced in v2.6.10 by historical commit befff6f5bf5f
("[SERIAL] Add new port registration/unregistration functions."):
https://git.kernel.org/tglx/history/c/befff6f5bf5f

The commit added an unconditional call to uart_remove_one_port() in
serial8250_register_port().  In v3.7, commit 835d844d1a28 ("8250_pnp:
do pnp probe before legacy probe") made that call conditional on
uart->port.dev which allows me to fix the issue by zeroing that pointer
in the error path.  Thus, the present commit will fix the problem as far
back as v3.7 whereas still older versions need to also cherry-pick
835d844d1a28.

Fixes: 835d844d1a28 ("8250_pnp: do pnp probe before legacy probe")
Signed-off-by: Lukas Wunner 
Cc: stable@vger.kernel.org # v2.6.10
Cc: stable@vger.kernel.org # v2.6.10: 835d844d1a28: 8250_pnp: do pnp probe before legacy
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/b4a072013ee1a1d13ee06b4325afb19bda57ca1b.1589285873.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman