linux-stable.git/drivers/tty/serial, branch v5.4.301 Linux kernel stable tree serial: max310x: Add error checking in probe() 2025-10-29T12:59:47+00:00 Dan Carpenter dan.carpenter@linaro.org 2025-08-07T15:54:37+00:00 148aba0be56fc991a9e9491e0b2a9b8165c59101 [ Upstream commit 672a37ba8af1f2ebcedeb94aea2cdd047f805f30 ] Check if devm_i2c_new_dummy_device() fails. Fixes: 2e1f2d9a9bdb ("serial: max310x: implement I2C support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/aJTMPZiKqeXSE-KM@stanley.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 672a37ba8af1f2ebcedeb94aea2cdd047f805f30 ]

Check if devm_i2c_new_dummy_device() fails.

Fixes: 2e1f2d9a9bdb ("serial: max310x: implement I2C support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJTMPZiKqeXSE-KM@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: sc16is7xx: fix bug in flow control levels init 2025-10-02T11:34:32+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2025-09-17T13:03:19+00:00 26606c5f0be855b90171d9f2fd23281f671b7088 [ Upstream commit 535fd4c98452c87537a40610abba45daf5761ec6 ] When trying to set MCR[2], XON1 is incorrectly accessed instead. And when writing to the TCR register to configure flow control levels, we are incorrectly writing to the MSR register. The default value of $00 is then used for TCR, which means that selectable trigger levels in FCR are used in place of TCR. TCR/TLR access requires EFR[4] (enable enhanced functions) and MCR[2] to be set. EFR[4] is already set in probe(). MCR access requires LCR[7] to be zero. Since LCR is set to $BF when trying to set MCR[2], XON1 is incorrectly accessed instead because MCR shares the same address space as XON1. Since MCR[2] is unmodified and still zero, when writing to TCR we are in fact writing to MSR because TCR/TLR registers share the same address space as MSR/SPR. Fix by first removing useless reconfiguration of EFR[4] (enable enhanced functions), as it is already enabled in sc16is7xx_probe() since commit 43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed"). Now LCR is $00, which means that MCR access is enabled. Also remove regcache_cache_bypass() calls since we no longer access the enhanced registers set, and TCR is already declared as volatile (in fact by declaring MSR as volatile, which shares the same address). Finally disable access to TCR/TLR registers after modifying them by clearing MCR[2]. Note: the comment about "... and internal clock div" is wrong and can be ignored/removed as access to internal clock div registers (DLL/DLH) is permitted only when LCR[7] is logic 1, not when enhanced features is enabled. And DLL/DLH access is not needed in sc16is7xx_startup(). Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20250731124451.1108864-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ s->regmap renames + context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 535fd4c98452c87537a40610abba45daf5761ec6 ]

When trying to set MCR[2], XON1 is incorrectly accessed instead. And when
writing to the TCR register to configure flow control levels, we are
incorrectly writing to the MSR register. The default value of $00 is then
used for TCR, which means that selectable trigger levels in FCR are used
in place of TCR.

TCR/TLR access requires EFR[4] (enable enhanced functions) and MCR[2]
to be set. EFR[4] is already set in probe().

MCR access requires LCR[7] to be zero.

Since LCR is set to $BF when trying to set MCR[2], XON1 is incorrectly
accessed instead because MCR shares the same address space as XON1.

Since MCR[2] is unmodified and still zero, when writing to TCR we are in
fact writing to MSR because TCR/TLR registers share the same address space
as MSR/SPR.

Fix by first removing useless reconfiguration of EFR[4] (enable enhanced
functions), as it is already enabled in sc16is7xx_probe() since commit
43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed").
Now LCR is $00, which means that MCR access is enabled.

Also remove regcache_cache_bypass() calls since we no longer access the
enhanced registers set, and TCR is already declared as volatile (in fact
by declaring MSR as volatile, which shares the same address).

Finally disable access to TCR/TLR registers after modifying them by
clearing MCR[2].

Note: the comment about "... and internal clock div" is wrong and can be
      ignored/removed as access to internal clock div registers (DLL/DLH)
      is permitted only when LCR[7] is logic 1, not when enhanced features
      is enabled. And DLL/DLH access is not needed in sc16is7xx_startup().

Fixes: dfeae619d781 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250731124451.1108864-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ s->regmap renames + context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: fix panic due to PSLVERR 2025-08-28T14:21:30+00:00 Yunhui Cui cuiyunhui@bytedance.com 2025-07-23T02:33:22+00:00 0b882f00655afefbc7729c6b5aec86f7a5473a3d commit 7f8fdd4dbffc05982b96caf586f77a014b2a9353 upstream. When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com [ Applied fix to serial8250_do_startup() instead of serial8250_initialize() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7f8fdd4dbffc05982b96caf586f77a014b2a9353 upstream.

When the PSLVERR_RESP_EN parameter is set to 1, the device generates
an error response if an attempt is made to read an empty RBR (Receive
Buffer Register) while the FIFO is enabled.

In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,
UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes
dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter
function enables the FIFO via serial_out(p, UART_FCR, p->fcr).
Execution proceeds to the serial_port_in(port, UART_RX).
This satisfies the PSLVERR trigger condition.

When another CPU (e.g., using printk()) is accessing the UART (UART
is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==
(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter
dw8250_force_idle().

Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock
to fix this issue.

Panic backtrace:
[    0.442336] Oops - unknown exception [#1]
[    0.442343] epc : dw8250_serial_in32+0x1e/0x4a
[    0.442351]  ra : serial8250_do_startup+0x2c8/0x88e
...
[    0.442416] console_on_rootfs+0x26/0x70

Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround")
Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com
[ Applied fix to serial8250_do_startup() instead of serial8250_initialize() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pch_uart: Fix dma_sync_sg_for_device() nents value 2025-08-28T14:21:14+00:00 Thomas Fourier fourier.thomas@gmail.com 2025-07-01T11:34:52+00:00 fe96b632ad43841309d6bca3853107d60bd7e985 commit 6c0e9f05c9d7875995b0e92ace71be947f280bbd upstream. The dma_sync_sg_for_device() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned according to the documentation in Documentation/core-api/dma-api.rst:450: With the sync_sg API, all the parameters must be the same as those passed into the sg mapping API. Fixes: da3564ee027e ("pch_uart: add multi-scatter processing") Cc: stable <stable@kernel.org> Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250701113452.18590-2-fourier.thomas@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6c0e9f05c9d7875995b0e92ace71be947f280bbd upstream.

The dma_sync_sg_for_device() functions should be called with the same
nents as the dma_map_sg(), not the value the map function returned
according to the documentation in Documentation/core-api/dma-api.rst:450:
	With the sync_sg API, all the parameters must be the same
	as those passed into the sg mapping API.

Fixes: da3564ee027e ("pch_uart: add multi-scatter processing")
Cc: stable <stable@kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250701113452.18590-2-fourier.thomas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: uartlite: register uart driver in init 2025-07-17T16:24:50+00:00 Jakub Lewalski jakub.lewalski@nokia.com 2025-03-31T16:06:19+00:00 5015eed450005bab6e5cb6810f7a62eab0434fc4 [ Upstream commit 6bd697b5fc39fd24e2aa418c7b7d14469f550a93 ] When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called. Signed-off-by: Jakub Lewalski <jakub.lewalski@nokia.com> Signed-off-by: Elodie Decerle <elodie.decerle@nokia.com> Link: https://lore.kernel.org/r/20250331160732.2042-1-elodie.decerle@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6bd697b5fc39fd24e2aa418c7b7d14469f550a93 ]

When two instances of uart devices are probing, a concurrency race can
occur. If one thread calls uart_register_driver function, which first
allocates and assigns memory to 'uart_state' member of uart_driver
structure, the other instance can bypass uart driver registration and
call ulite_assign. This calls uart_add_one_port, which expects the uart
driver to be fully initialized. This leads to a kernel panic due to a
null pointer dereference:

[    8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8
[    8.156982] #PF: supervisor write access in kernel mode
[    8.156984] #PF: error_code(0x0002) - not-present page
[    8.156986] PGD 0 P4D 0
...
[    8.180668] RIP: 0010:mutex_lock+0x19/0x30
[    8.188624] Call Trace:
[    8.188629]  ? __die_body.cold+0x1a/0x1f
[    8.195260]  ? page_fault_oops+0x15c/0x290
[    8.209183]  ? __irq_resolve_mapping+0x47/0x80
[    8.209187]  ? exc_page_fault+0x64/0x140
[    8.209190]  ? asm_exc_page_fault+0x22/0x30
[    8.209196]  ? mutex_lock+0x19/0x30
[    8.223116]  uart_add_one_port+0x60/0x440
[    8.223122]  ? proc_tty_register_driver+0x43/0x50
[    8.223126]  ? tty_register_driver+0x1ca/0x1e0
[    8.246250]  ulite_probe+0x357/0x4b0 [uartlite]

To prevent it, move uart driver registration in to init function. This
will ensure that uart_driver is always registered when probe function
is called.

Signed-off-by: Jakub Lewalski <jakub.lewalski@nokia.com>
Signed-off-by: Elodie Decerle <elodie.decerle@nokia.com>
Link: https://lore.kernel.org/r/20250331160732.2042-1-elodie.decerle@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: Fix potential null-ptr-deref in mlb_usio_probe() 2025-06-27T10:02:48+00:00 Henry Martin bsdhenrymartin@gmail.com 2025-04-03T07:03:39+00:00 a05ebe384c7ca75476453f3070c67d9cf1d1a89f [ Upstream commit 86bcae88c9209e334b2f8c252f4cc66beb261886 ] devm_ioremap() can return NULL on error. Currently, mlb_usio_probe() does not check for this case, which could result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue. Fixes: ba44dc043004 ("serial: Add Milbeaut serial control") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://lore.kernel.org/r/20250403070339.64990-1-bsdhenrymartin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 86bcae88c9209e334b2f8c252f4cc66beb261886 ]

devm_ioremap() can return NULL on error. Currently, mlb_usio_probe()
does not check for this case, which could result in a NULL pointer
dereference.

Add NULL check after devm_ioremap() to prevent this issue.

Fixes: ba44dc043004 ("serial: Add Milbeaut serial control")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://lore.kernel.org/r/20250403070339.64990-1-bsdhenrymartin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: sifive: lock port in startup()/shutdown() callbacks 2025-05-02T05:39:26+00:00 Ryo Takakura ryotkkr98@gmail.com 2025-04-12T00:18:47+00:00 1985ca87bf78d57e5a5b2cf35497420824ab26f6 commit e1ca3ff28ab1e2c1e70713ef3fa7943c725742c3 upstream. startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS. The register is also accessed from write() callback. If console were printing and startup()/shutdown() callback gets called, its access to the register could be overwritten. Add port->lock to startup()/shutdown() callbacks to make sure their access to SIFIVE_SERIAL_IE_OFFS is synchronized against write() callback. Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART") Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: stable@vger.kernel.org Reviewed-by: John Ogness <john.ogness@linutronix.de> Rule: add Link: https://lore.kernel.org/stable/20250330003522.386632-1-ryotkkr98%40gmail.com Link: https://lore.kernel.org/r/20250412001847.183221-1-ryotkkr98@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e1ca3ff28ab1e2c1e70713ef3fa7943c725742c3 upstream.

startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS.
The register is also accessed from write() callback.

If console were printing and startup()/shutdown() callback
gets called, its access to the register could be overwritten.

Add port->lock to startup()/shutdown() callbacks to make sure
their access to SIFIVE_SERIAL_IE_OFFS is synchronized against
write() callback.

Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART")
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Rule: add
Link: https://lore.kernel.org/stable/20250330003522.386632-1-ryotkkr98%40gmail.com
Link: https://lore.kernel.org/r/20250412001847.183221-1-ryotkkr98@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_dma: terminate correct DMA in tx_dma_flush() 2025-04-10T12:29:39+00:00 John Keeping jkeeping@inmusicbrands.com 2025-02-24T12:18:30+00:00 0d510e175b09a634cf662a3d2cf66913bb95085d commit a26503092c75abba70a0be2aa01145ecf90c2a22 upstream. When flushing transmit side DMA, it is the transmit channel that should be terminated, not the receive channel. Fixes: 9e512eaaf8f40 ("serial: 8250: Fix fifo underflow on flush") Cc: stable <stable@kernel.org> Reported-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250224121831.1429323-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a26503092c75abba70a0be2aa01145ecf90c2a22 upstream.

When flushing transmit side DMA, it is the transmit channel that should
be terminated, not the receive channel.

Fixes: 9e512eaaf8f40 ("serial: 8250: Fix fifo underflow on flush")
Cc: stable <stable@kernel.org>
Reported-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250224121831.1429323-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: 8250: Add some more device IDs 2025-04-10T12:29:39+00:00 Cameron Williams cang1@live.co.uk 2025-02-23T22:07:38+00:00 16eed55a084e21bceb7b8e32e48c58bd72c2f838 commit be6a23650908e2f827f2e7839a3fbae41ccb5b63 upstream. These card IDs got missed the first time around. Cc: stable <stable@kernel.org> Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DB7PR02MB380295BCC879CCF91315AC38C4C12@DB7PR02MB3802.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be6a23650908e2f827f2e7839a3fbae41ccb5b63 upstream.

These card IDs got missed the first time around.

Cc: stable <stable@kernel.org>
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DB7PR02MB380295BCC879CCF91315AC38C4C12@DB7PR02MB3802.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_pci: add support for ASIX AX99100 2025-03-13T11:43:19+00:00 Jiaqing Zhao jiaqing.zhao@linux.intel.com 2023-07-24T08:39:32+00:00 14ffcc4571c9859d2f8fac67a1a7af10133d1037 commit 0b32216557ce3b2a468d1282d99b428bf72ff532 upstream. Each of the 4 PCI functions on ASIX AX99100 PCIe to Multi I/O Controller can be configured as a single-port serial port controller. The subvendor id is 0x1000 when configured as serial port and MSI interrupts are supported. Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230724083933.3173513-4-jiaqing.zhao@linux.intel.com Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0b32216557ce3b2a468d1282d99b428bf72ff532 upstream.

Each of the 4 PCI functions on ASIX AX99100 PCIe to Multi I/O
Controller can be configured as a single-port serial port controller.
The subvendor id is 0x1000 when configured as serial port and MSI
interrupts are supported.

Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230724083933.3173513-4-jiaqing.zhao@linux.intel.com
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>