linux-stable.git/drivers/tty/serial, branch v4.4.231 Linux kernel stable tree serial: amba-pl011: Make sure we initialize the port.lock spinlock 2020-06-30T00:07:50+00:00 John Stultz john.stultz@linaro.org 2020-04-28T18:40:50+00:00 428006b4573b0a8da191f66b19c9fa1303a6a8cb [ Upstream commit 8508f4cba308f785b2fd4b8c38849c117b407297 ] Valentine reported seeing: [ 3.626638] INFO: trying to register non-static key. [ 3.626639] the code is fine but needs lockdep annotation. [ 3.626640] turning off the locking correctness validator. [ 3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116 [ 3.626646] Hardware name: HiKey960 (DT) [ 3.626656] Workqueue: events deferred_probe_work_func [ 3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 3.640220] Call trace: [ 3.640225] dump_backtrace+0x0/0x1b8 [ 3.640227] show_stack+0x20/0x30 [ 3.640230] dump_stack+0xec/0x158 [ 3.640234] register_lock_class+0x598/0x5c0 [ 3.640235] __lock_acquire+0x80/0x16c0 [ 3.640236] lock_acquire+0xf4/0x4a0 [ 3.640241] _raw_spin_lock_irqsave+0x70/0xa8 [ 3.640245] uart_add_one_port+0x388/0x4b8 [ 3.640248] pl011_register_port+0x70/0xf0 [ 3.640250] pl011_probe+0x184/0x1b8 [ 3.640254] amba_probe+0xdc/0x180 [ 3.640256] really_probe+0xe0/0x338 [ 3.640257] driver_probe_device+0x60/0xf8 [ 3.640259] __device_attach_driver+0x8c/0xd0 [ 3.640260] bus_for_each_drv+0x84/0xd8 [ 3.640261] __device_attach+0xe4/0x140 [ 3.640263] device_initial_probe+0x1c/0x28 [ 3.640265] bus_probe_device+0xa4/0xb0 [ 3.640266] deferred_probe_work_func+0x7c/0xb8 [ 3.640269] process_one_work+0x2c0/0x768 [ 3.640271] worker_thread+0x4c/0x498 [ 3.640272] kthread+0x14c/0x158 [ 3.640275] ret_from_fork+0x10/0x1c Which seems to be due to the fact that after allocating the uap structure, nothing initializes the spinlock. Its a little confusing, as uart_port_spin_lock_init() is one place where the lock is supposed to be initialized, but it has an exception for the case where the port is a console. This makes it seem like a deeper fix is needed to properly register the console, but I'm not sure what that entails, and Andy suggested that this approach is less invasive. Thus, this patch resolves the issue by initializing the spinlock in the driver, and resolves the resulting warning. Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Reported-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-and-tested-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20200428184050.6501-1-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8508f4cba308f785b2fd4b8c38849c117b407297 ]

Valentine reported seeing:

[    3.626638] INFO: trying to register non-static key.
[    3.626639] the code is fine but needs lockdep annotation.
[    3.626640] turning off the locking correctness validator.
[    3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116
[    3.626646] Hardware name: HiKey960 (DT)
[    3.626656] Workqueue: events deferred_probe_work_func
[    3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
[    3.640220] Call trace:
[    3.640225]  dump_backtrace+0x0/0x1b8
[    3.640227]  show_stack+0x20/0x30
[    3.640230]  dump_stack+0xec/0x158
[    3.640234]  register_lock_class+0x598/0x5c0
[    3.640235]  __lock_acquire+0x80/0x16c0
[    3.640236]  lock_acquire+0xf4/0x4a0
[    3.640241]  _raw_spin_lock_irqsave+0x70/0xa8
[    3.640245]  uart_add_one_port+0x388/0x4b8
[    3.640248]  pl011_register_port+0x70/0xf0
[    3.640250]  pl011_probe+0x184/0x1b8
[    3.640254]  amba_probe+0xdc/0x180
[    3.640256]  really_probe+0xe0/0x338
[    3.640257]  driver_probe_device+0x60/0xf8
[    3.640259]  __device_attach_driver+0x8c/0xd0
[    3.640260]  bus_for_each_drv+0x84/0xd8
[    3.640261]  __device_attach+0xe4/0x140
[    3.640263]  device_initial_probe+0x1c/0x28
[    3.640265]  bus_probe_device+0xa4/0xb0
[    3.640266]  deferred_probe_work_func+0x7c/0xb8
[    3.640269]  process_one_work+0x2c0/0x768
[    3.640271]  worker_thread+0x4c/0x498
[    3.640272]  kthread+0x14c/0x158
[    3.640275]  ret_from_fork+0x10/0x1c

Which seems to be due to the fact that after allocating the uap
structure, nothing initializes the spinlock.

Its a little confusing, as uart_port_spin_lock_init() is one
place where the lock is supposed to be initialized, but it has
an exception for the case where the port is a console.

This makes it seem like a deeper fix is needed to properly
register the console, but I'm not sure what that entails, and
Andy suggested that this approach is less invasive.

Thus, this patch resolves the issue by initializing the spinlock
in the driver, and resolves the resulting warning.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-and-tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20200428184050.6501-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
sc16is7xx: move label 'err_spi' to correct section 2020-06-03T06:12:15+00:00 Guoqing Jiang gqjiang@suse.com 2019-04-09T08:16:38+00:00 81ff1b1c32526c66b3dcf28d238f2267e696f525 commit e00164a0f000de893944981f41a568c981aca658 upstream. err_spi is used when SERIAL_SC16IS7XX_SPI is enabled, so make the label only available under SERIAL_SC16IS7XX_SPI option. Otherwise, the below warning appears. drivers/tty/serial/sc16is7xx.c:1523:1: warning: label ‘err_spi’ defined but not used [-Wunused-label] err_spi: ^~~~~~~ Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Fixes: ac0cdb3d9901 ("sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e00164a0f000de893944981f41a568c981aca658 upstream.

err_spi is used when SERIAL_SC16IS7XX_SPI is enabled, so make
the label only available under SERIAL_SC16IS7XX_SPI option.
Otherwise, the below warning appears.

drivers/tty/serial/sc16is7xx.c:1523:1: warning: label ‘err_spi’ defined but not used [-Wunused-label]
 err_spi:
  ^~~~~~~

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Fixes: ac0cdb3d9901 ("sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: samsung: Fix possible out of bounds access on non-DT platform 2020-05-10T08:26:02+00:00 Krzysztof Kozlowski k.kozlowski@samsung.com 2016-06-16T06:27:36+00:00 c32532162f8ea4beed50a20cf4f9b205c75fe1b1 commit 926b7b5122c96e1f18cd20e85a286c7ec8d18c97 upstream. On non-DeviceTree platforms, the index of serial device is a static variable incremented on each probe. It is incremented even if deferred probe happens when getting the clock in s3c24xx_serial_init_port(). This index is used for referencing elements of statically allocated s3c24xx_serial_ports array. In case of re-probe, the index will point outside of this array leading to memory corruption. Increment the index only on successful probe. Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Fixes: b497549a035c ("[ARM] S3C24XX: Split serial driver into core and per-cpu drivers") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 926b7b5122c96e1f18cd20e85a286c7ec8d18c97 upstream.

On non-DeviceTree platforms, the index of serial device is a static
variable incremented on each probe.  It is incremented even if deferred
probe happens when getting the clock in s3c24xx_serial_init_port().

This index is used for referencing elements of statically allocated
s3c24xx_serial_ports array.  In case of re-probe, the index will point
outside of this array leading to memory corruption.

Increment the index only on successful probe.

Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Fixes: b497549a035c ("[ARM] S3C24XX: Split serial driver into core and per-cpu drivers")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: msm: Support more bauds 2020-05-10T08:26:02+00:00 Stephen Boyd stephen.boyd@linaro.org 2016-03-25T21:35:49+00:00 651bf80028592c0d1c7ad2aa921310ebec9aa0f4 commit 98952bf510d0c7cdfc284f098bbf4682dc47bc61 upstream. The msm_find_best_baud() function is written with the assumption that the port->uartclk rate is fixed to a particular rate at boot time, but now this driver changes that clk rate at runtime when the baud is changed. The way the hardware works is that an input clk rate comes from the clk controller into the uart hw block. That rate is typically 1843200 or 3686400 Hz. That rate can then be divided by an internal divider in the hw block to achieve a particular baud on the serial wire. msm_find_best_baud() is looking for that divider value. A few things are wrong with the way the code is written. First, it assumes that the maximum baud that the uart can support if the clk rate is fixed at boot is 460800, which would correspond to an input clk rate of 230400 * 16 == 3686400 Hz. Except some devices have a boot rate of 1843200 Hz or max baud of 115200, so achieving 230400 on those devices doesn't work at all because we don't increase the clk rate unless max baud is 460800. Second, we can't achieve bauds higher than 460800 that require anything besides a divisor of 1, because we always call msm_find_best_baud() with a fixed port->uartclk rate that will eventually be changed after we calculate the divisor. So if we need to get a baud of 500000, we'll just multiply that by 16 and hope that the clk can give us 500000 * 16 == 8000000 Hz, which it typically can't do. To really achieve 500000 baud, we need to get an input clk rate of 24000000 Hz and then divide that by 3 inside the uart hardware. Finally, we return success for bauds even when we can't actually achieve them. This means that when the user asks for 500000 baud, we actually get 921600 right now, but the user doesn't know that. Fix all of this by searching through the divisor and clk rate space with a combination of clk_round_rate() and baud calculations, keeping track of the best clk rate and divisor we find if we can't get an exact match. Typically we can get an exact match with a divisor of 1, but sometimes we need to keep track and try more frequencies. On my msm8916 device, this results in all standard bauds in baud_table being supported except for 1800, 576000, 1152000, and 4000000. Fixes: 850b37a71bde ("tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation") Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com> Cc: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Cristian Prundeanu <cprundea@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 98952bf510d0c7cdfc284f098bbf4682dc47bc61 upstream.

The msm_find_best_baud() function is written with the assumption
that the port->uartclk rate is fixed to a particular rate at boot
time, but now this driver changes that clk rate at runtime when
the baud is changed.

The way the hardware works is that an input clk rate comes from
the clk controller into the uart hw block. That rate is typically
1843200 or 3686400 Hz. That rate can then be divided by an
internal divider in the hw block to achieve a particular baud on
the serial wire. msm_find_best_baud() is looking for that divider
value.

A few things are wrong with the way the code is written. First,
it assumes that the maximum baud that the uart can support if the
clk rate is fixed at boot is 460800, which would correspond to an
input clk rate of 230400 * 16 == 3686400 Hz.  Except some devices
have a boot rate of 1843200 Hz or max baud of 115200, so
achieving 230400 on those devices doesn't work at all because we
don't increase the clk rate unless max baud is 460800.

Second, we can't achieve bauds higher than 460800 that require
anything besides a divisor of 1, because we always call
msm_find_best_baud() with a fixed port->uartclk rate that will
eventually be changed after we calculate the divisor. So if we
need to get a baud of 500000, we'll just multiply that by 16 and
hope that the clk can give us 500000 * 16 == 8000000 Hz, which it
typically can't do. To really achieve 500000 baud, we need to get
an input clk rate of 24000000 Hz and then divide that by 3 inside
the uart hardware.

Finally, we return success for bauds even when we can't actually
achieve them. This means that when the user asks for 500000 baud,
we actually get 921600 right now, but the user doesn't know that.

Fix all of this by searching through the divisor and clk rate
space with a combination of clk_round_rate() and baud
calculations, keeping track of the best clk rate and divisor we
find if we can't get an exact match. Typically we can get an
exact match with a divisor of 1, but sometimes we need to keep
track and try more frequencies. On my msm8916 device, this
results in all standard bauds in baud_table being supported
except for 1800, 576000, 1152000, and 4000000.

Fixes: 850b37a71bde ("tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation")
Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
Cc: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Cristian Prundeanu <cprundea@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE 2020-03-11T06:51:16+00:00 Daniel Golle daniel@makrotopia.org 2020-02-07T09:53:35+00:00 0e6d032c51c075744116e75150b88f6cb6386fbd [ Upstream commit 87c5cbf71ecbb9e289d60a2df22eb686c70bf196 ] On AR934x this UART is usually not initialized by the bootloader as it is only used as a secondary serial port while the primary UART is a newly introduced NS16550-compatible. In order to make use of the ar933x-uart on AR934x without RTS/CTS hardware flow control, one needs to set the UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this UART is used as primary/console, the bootloader on AR934x typically doesn't set those bits. Setting them explicitely on AR933x should not do any harm, so just set them unconditionally. Tested-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20200207095335.GA179836@makrotopia.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 87c5cbf71ecbb9e289d60a2df22eb686c70bf196 ]

On AR934x this UART is usually not initialized by the bootloader
as it is only used as a secondary serial port while the primary
UART is a newly introduced NS16550-compatible.
In order to make use of the ar933x-uart on AR934x without RTS/CTS
hardware flow control, one needs to set the
UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this
UART is used as primary/console, the bootloader on AR934x typically
doesn't set those bits.
Setting them explicitely on AR933x should not do any harm, so just
set them unconditionally.

Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20200207095335.GA179836@makrotopia.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: serial: imx: setup the correct sg entry for tx dma 2020-02-28T14:39:13+00:00 Fugang Duan fugang.duan@nxp.com 2020-02-11T06:16:01+00:00 7e278b11eeb35bdce0a5bb6300ae6d3c4af66cff commit f76707831829530ffdd3888bebc108aecefccaa0 upstream. There has oops as below happen on i.MX8MP EVK platform that has 6G bytes DDR memory. when (xmit->tail < xmit->head) && (xmit->head == 0), it setups one sg entry with sg->length is zero: sg_set_buf(sgl + 1, xmit->buf, xmit->head); if xmit->buf is allocated from >4G address space, and SDMA only support <4G address space, then dma_map_sg() will call swiotlb_map() to do bounce buffer copying and mapping. But swiotlb_map() don't allow sg entry's length is zero, otherwise report BUG_ON(). So the patch is to correct the tx DMA scatter list. Oops: [ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497! [ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 287.686075] Modules linked in: [ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10 [ 287.696872] Hardware name: FSL i.MX8MP EVK (DT) [ 287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310 [ 287.711076] lr : swiotlb_map+0x60/0x148 [ 287.714909] sp : ffff800010003c00 [ 287.718221] x29: ffff800010003c00 x28: 0000000000000000 [ 287.723533] x27: 0000000000000040 x26: ffff800011ae0000 [ 287.728844] x25: ffff800011ae09f8 x24: 0000000000000000 [ 287.734155] x23: 00000001b7af9000 x22: 0000000000000000 [ 287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe [ 287.744776] x19: ffff000176409c10 x18: 000000000000002e [ 287.750087] x17: 0000000000000000 x16: 0000000000000000 [ 287.755397] x15: 0000000000000000 x14: 0000000000000000 [ 287.760707] x13: ffff00017f334000 x12: 0000000000000001 [ 287.766018] x11: 00000000001fffff x10: 0000000000000000 [ 287.771328] x9 : 0000000000000003 x8 : 0000000000000000 [ 287.776638] x7 : 0000000000000000 x6 : 0000000000000000 [ 287.781949] x5 : 0000000000200000 x4 : 0000000000000000 [ 287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000 [ 287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000 [ 287.797881] Call trace: [ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310 [ 287.804859] swiotlb_map+0x60/0x148 [ 287.808347] dma_direct_map_page+0xf0/0x130 [ 287.812530] dma_direct_map_sg+0x78/0xe0 [ 287.816453] imx_uart_dma_tx+0x134/0x2f8 [ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168 [ 287.824992] vchan_complete+0x194/0x200 [ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0 [ 287.833879] tasklet_action+0x24/0x30 [ 287.837540] __do_softirq+0x120/0x23c [ 287.841202] irq_exit+0xb8/0xd8 [ 287.844343] __handle_domain_irq+0x64/0xb8 [ 287.848438] gic_handle_irq+0x5c/0x148 [ 287.852185] el1_irq+0xb8/0x180 [ 287.855327] cpuidle_enter_state+0x84/0x360 [ 287.859508] cpuidle_enter+0x34/0x48 [ 287.863083] call_cpuidle+0x18/0x38 [ 287.866571] do_idle+0x1e0/0x280 [ 287.869798] cpu_startup_entry+0x20/0x40 [ 287.873721] rest_init+0xd4/0xe0 [ 287.876949] arch_call_rest_init+0xc/0x14 [ 287.880958] start_kernel+0x420/0x44c [ 287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000) [ 287.890718] ---[ end trace 5bc44c4ab6b009ce ]--- [ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt [ 287.901686] SMP: stopping secondary CPUs [ 288.905607] SMP: failed to stop secondary CPUs 0-1 [ 288.910395] Kernel Offset: disabled [ 288.913882] CPU features: 0x0002,2000200c [ 288.917888] Memory Limit: none [ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reported-by: Eagle Zhou <eagle.zhou@nxp.com> Tested-by: Eagle Zhou <eagle.zhou@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Cc: stable <stable@vger.kernel.org> Fixes: 7942f8577f2a ("serial: imx: TX DMA: clean up sg initialization") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f76707831829530ffdd3888bebc108aecefccaa0 upstream.

There has oops as below happen on i.MX8MP EVK platform that has
6G bytes DDR memory.

when (xmit->tail < xmit->head) && (xmit->head == 0),
it setups one sg entry with sg->length is zero:
	sg_set_buf(sgl + 1, xmit->buf, xmit->head);

if xmit->buf is allocated from >4G address space, and SDMA only
support <4G address space, then dma_map_sg() will call swiotlb_map()
to do bounce buffer copying and mapping.

But swiotlb_map() don't allow sg entry's length is zero, otherwise
report BUG_ON().

So the patch is to correct the tx DMA scatter list.

Oops:
[  287.675715] kernel BUG at kernel/dma/swiotlb.c:497!
[  287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  287.686075] Modules linked in:
[  287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10
[  287.696872] Hardware name: FSL i.MX8MP EVK (DT)
[  287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[  287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310
[  287.711076] lr : swiotlb_map+0x60/0x148
[  287.714909] sp : ffff800010003c00
[  287.718221] x29: ffff800010003c00 x28: 0000000000000000
[  287.723533] x27: 0000000000000040 x26: ffff800011ae0000
[  287.728844] x25: ffff800011ae09f8 x24: 0000000000000000
[  287.734155] x23: 00000001b7af9000 x22: 0000000000000000
[  287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe
[  287.744776] x19: ffff000176409c10 x18: 000000000000002e
[  287.750087] x17: 0000000000000000 x16: 0000000000000000
[  287.755397] x15: 0000000000000000 x14: 0000000000000000
[  287.760707] x13: ffff00017f334000 x12: 0000000000000001
[  287.766018] x11: 00000000001fffff x10: 0000000000000000
[  287.771328] x9 : 0000000000000003 x8 : 0000000000000000
[  287.776638] x7 : 0000000000000000 x6 : 0000000000000000
[  287.781949] x5 : 0000000000200000 x4 : 0000000000000000
[  287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000
[  287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000
[  287.797881] Call trace:
[  287.800328]  swiotlb_tbl_map_single+0x1fc/0x310
[  287.804859]  swiotlb_map+0x60/0x148
[  287.808347]  dma_direct_map_page+0xf0/0x130
[  287.812530]  dma_direct_map_sg+0x78/0xe0
[  287.816453]  imx_uart_dma_tx+0x134/0x2f8
[  287.820374]  imx_uart_dma_tx_callback+0xd8/0x168
[  287.824992]  vchan_complete+0x194/0x200
[  287.828828]  tasklet_action_common.isra.0+0x154/0x1a0
[  287.833879]  tasklet_action+0x24/0x30
[  287.837540]  __do_softirq+0x120/0x23c
[  287.841202]  irq_exit+0xb8/0xd8
[  287.844343]  __handle_domain_irq+0x64/0xb8
[  287.848438]  gic_handle_irq+0x5c/0x148
[  287.852185]  el1_irq+0xb8/0x180
[  287.855327]  cpuidle_enter_state+0x84/0x360
[  287.859508]  cpuidle_enter+0x34/0x48
[  287.863083]  call_cpuidle+0x18/0x38
[  287.866571]  do_idle+0x1e0/0x280
[  287.869798]  cpu_startup_entry+0x20/0x40
[  287.873721]  rest_init+0xd4/0xe0
[  287.876949]  arch_call_rest_init+0xc/0x14
[  287.880958]  start_kernel+0x420/0x44c
[  287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000)
[  287.890718] ---[ end trace 5bc44c4ab6b009ce ]---
[  287.895334] Kernel panic - not syncing: Fatal exception in interrupt
[  287.901686] SMP: stopping secondary CPUs
[  288.905607] SMP: failed to stop secondary CPUs 0-1
[  288.910395] Kernel Offset: disabled
[  288.913882] CPU features: 0x0002,2000200c
[  288.917888] Memory Limit: none
[  288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Reported-by: Eagle Zhou <eagle.zhou@nxp.com>
Tested-by: Eagle Zhou <eagle.zhou@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 7942f8577f2a ("serial: imx: TX DMA: clean up sg initialization")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: pch_uart: correct usage of dma_unmap_sg 2020-01-23T07:18:37+00:00 Peng Fan peng.fan@nxp.com 2019-11-13T05:37:42+00:00 df1f6b1f8a3426035783d8b30d13ca5cfcbfc29b commit 74887542fdcc92ad06a48c0cca17cdf09fc8aa00 upstream. Per Documentation/DMA-API-HOWTO.txt, To unmap a scatterlist, just call: dma_unmap_sg(dev, sglist, nents, direction); .. note:: The 'nents' argument to the dma_unmap_sg call must be the _same_ one you passed into the dma_map_sg call, it should _NOT_ be the 'count' value _returned_ from the dma_map_sg call. However in the driver, priv->nent is directly assigned with value returned from dma_map_sg, and dma_unmap_sg use priv->nent for unmap, this breaks the API usage. So introduce a new entry orig_nent to remember 'nents'. Fixes: da3564ee027e ("pch_uart: add multi-scatter processing") Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1573623259-6339-1-git-send-email-peng.fan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 74887542fdcc92ad06a48c0cca17cdf09fc8aa00 upstream.

Per Documentation/DMA-API-HOWTO.txt,
To unmap a scatterlist, just call:
	dma_unmap_sg(dev, sglist, nents, direction);

.. note::

	The 'nents' argument to the dma_unmap_sg call must be
	the _same_ one you passed into the dma_map_sg call,
	it should _NOT_ be the 'count' value _returned_ from the
	dma_map_sg call.

However in the driver, priv->nent is directly assigned with value
returned from dma_map_sg, and dma_unmap_sg use priv->nent for unmap,
this breaks the API usage.

So introduce a new entry orig_nent to remember 'nents'.

Fixes: da3564ee027e ("pch_uart: add multi-scatter processing")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1573623259-6339-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: imx: use the sg count from dma_map_sg 2020-01-23T07:18:37+00:00 Peng Fan peng.fan@nxp.com 2019-11-07T06:42:53+00:00 d3edf86ff7530120ed8147917f9788f7b9ba854e commit 596fd8dffb745afcebc0ec6968e17fe29f02044c upstream. The dmaengine_prep_slave_sg needs to use sg count returned by dma_map_sg, not use sport->dma_tx_nents, because the return value of dma_map_sg is not always same with "nents". Fixes: b4cdc8f61beb ("serial: imx: add DMA support for imx6q") Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1573108875-26530-1-git-send-email-peng.fan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 596fd8dffb745afcebc0ec6968e17fe29f02044c upstream.

The dmaengine_prep_slave_sg needs to use sg count returned
by dma_map_sg, not use sport->dma_tx_nents, because the return
value of dma_map_sg is not always same with "nents".

Fixes: b4cdc8f61beb ("serial: imx: add DMA support for imx6q")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1573108875-26530-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: link tty and port before configuring it as console 2020-01-14T19:03:05+00:00 Sudip Mukherjee sudipm.mukherjee@gmail.com 2019-12-12T13:16:02+00:00 4779450e5a2995bc15a2e4a7d2eff590a1797962 commit fb2b90014d782d80d7ebf663e50f96d8c507a73c upstream. There seems to be a race condition in tty drivers and I could see on many boot cycles a NULL pointer dereference as tty_init_dev() tries to do 'tty->port->itty = tty' even though tty->port is NULL. 'tty->port' will be set by the driver and if the driver has not yet done it before we open the tty device we can get to this situation. By adding some extra debug prints, I noticed that: 6.650130: uart_add_one_port 6.663849: register_console 6.664846: tty_open 6.674391: tty_init_dev 6.675456: tty_port_link_device uart_add_one_port() registers the console, as soon as it registers, the userspace tries to use it and that leads to tty_open() but uart_add_one_port() has not yet done tty_port_link_device() and so tty->port is not yet configured when control reaches tty_init_dev(). Further look into the code and tty_port_link_device() is done by uart_add_one_port(). After registering the console uart_add_one_port() will call tty_port_register_device_attr_serdev() and tty_port_link_device() is called from this. Call add tty_port_link_device() before uart_configure_port() is done and add a check in tty_port_link_device() so that it only links the port if it has not been done yet. Suggested-by: Jiri Slaby <jslaby@suse.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191212131602.29504-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fb2b90014d782d80d7ebf663e50f96d8c507a73c upstream.

There seems to be a race condition in tty drivers and I could see on
many boot cycles a NULL pointer dereference as tty_init_dev() tries to
do 'tty->port->itty = tty' even though tty->port is NULL.
'tty->port' will be set by the driver and if the driver has not yet done
it before we open the tty device we can get to this situation. By adding
some extra debug prints, I noticed that:

6.650130: uart_add_one_port
6.663849: register_console
6.664846: tty_open
6.674391: tty_init_dev
6.675456: tty_port_link_device

uart_add_one_port() registers the console, as soon as it registers, the
userspace tries to use it and that leads to tty_open() but
uart_add_one_port() has not yet done tty_port_link_device() and so
tty->port is not yet configured when control reaches tty_init_dev().

Further look into the code and tty_port_link_device() is done by
uart_add_one_port(). After registering the console uart_add_one_port()
will call tty_port_register_device_attr_serdev() and
tty_port_link_device() is called from this.

Call add tty_port_link_device() before uart_configure_port() is done and
add a check in tty_port_link_device() so that it only links the port if
it has not been done yet.

Suggested-by: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191212131602.29504-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: msm_serial: Fix lockup for sysrq and oops 2020-01-12T10:22:44+00:00 Leo Yan leo.yan@linaro.org 2019-11-27T14:15:43+00:00 4e06cbaef728ad6bc4533a2fb40b5e40f07df2ad commit 0e4f7f920a5c6bfe5e851e989f27b35a0cc7fb7e upstream. As the commit 677fe555cbfb ("serial: imx: Fix recursive locking bug") has mentioned the uart driver might cause recursive locking between normal printing and the kernel debugging facilities (e.g. sysrq and oops). In the commit it gave out suggestion for fixing recursive locking issue: "The solution is to avoid locking in the sysrq case and trylock in the oops_in_progress case." This patch follows the suggestion (also used the exactly same code with other serial drivers, e.g. amba-pl011.c) to fix the recursive locking issue, this can avoid stuck caused by deadlock and print out log for sysrq and oops. Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.") Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0e4f7f920a5c6bfe5e851e989f27b35a0cc7fb7e upstream.

As the commit 677fe555cbfb ("serial: imx: Fix recursive locking bug")
has mentioned the uart driver might cause recursive locking between
normal printing and the kernel debugging facilities (e.g. sysrq and
oops).  In the commit it gave out suggestion for fixing recursive
locking issue: "The solution is to avoid locking in the sysrq case
and trylock in the oops_in_progress case."

This patch follows the suggestion (also used the exactly same code with
other serial drivers, e.g. amba-pl011.c) to fix the recursive locking
issue, this can avoid stuck caused by deadlock and print out log for
sysrq and oops.

Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>