linux-stable.git/drivers/tty/serial, branch v4.4.207 Linux kernel stable tree serial: imx: fix error handling in console_setup 2019-12-21T09:34:38+00:00 Stefan Agner stefan@agner.ch 2018-11-14T17:49:38+00:00 b64f139295e79ce6a827d5b65d59ad3f40074fa1 [ Upstream commit 63fd4b94b948c14eeb27a3bbf50ea0f7f0593bad ] The ipg clock only needs to be unprepared in case preparing per clock fails. The ipg clock has already disabled at the point. Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 63fd4b94b948c14eeb27a3bbf50ea0f7f0593bad ]

The ipg clock only needs to be unprepared in case preparing
per clock fails. The ipg clock has already disabled at the point.

Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: ifx6x60: add missed pm_runtime_disable 2019-12-21T09:34:21+00:00 Chuhong Yuan hslester96@gmail.com 2019-11-18T02:48:33+00:00 3bc62e2e3faca8753303e845b9868f8e278e2471 commit 50b2b571c5f3df721fc81bf9a12c521dfbe019ba upstream. The driver forgets to call pm_runtime_disable in remove. Add the missed calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191118024833.21587-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 50b2b571c5f3df721fc81bf9a12c521dfbe019ba upstream.

The driver forgets to call pm_runtime_disable in remove.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191118024833.21587-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: serial_core: Perform NULL checks for break_ctl ops 2019-12-21T09:34:20+00:00 Jiangfeng Xiao xiaojiangfeng@huawei.com 2019-11-20T15:18:53+00:00 b3bfe9a81e08a61bba7754f079a68c54346041dd commit 7d73170e1c282576419f8b50a771f1fcd2b81a94 upstream. Doing fuzz test on sbsa uart device, causes a kernel crash due to NULL pointer dereference: ------------[ cut here ]------------ Unable to handle kernel paging request at virtual address fffffffffffffffc pgd = ffffffe331723000 [fffffffffffffffc] *pgd=0000002333595003, *pud=0000002333595003, *pmd=00000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: ping(O) jffs2 rtos_snapshot(O) pramdisk(O) hisi_sfc(O) Drv_Nandc_K(O) Drv_SysCtl_K(O) Drv_SysClk_K(O) bsp_reg(O) hns3(O) hns3_uio_enet(O) hclgevf(O) hclge(O) hnae3(O) mdio_factory(O) mdio_registry(O) mdio_dev(O) mdio(O) hns3_info(O) rtos_kbox_panic(O) uart_suspend(O) rsm(O) stp llc tunnel4 xt_tcpudp ipt_REJECT nf_reject_ipv4 iptable_filter ip_tables x_tables sd_mod xhci_plat_hcd xhci_pci xhci_hcd usbmon usbhid usb_storage ohci_platform ohci_pci ohci_hcd hid_generic hid ehci_platform ehci_pci ehci_hcd vfat fat usbcore usb_common scsi_mod yaffs2multi(O) ext4 jbd2 ext2 mbcache ofpart i2c_dev i2c_core uio ubi nand nand_ecc nand_ids cfi_cmdset_0002 cfi_cmdset_0001 cfi_probe gen_probe cmdlinepart chipreg mtdblock mtd_blkdevs mtd nfsd auth_rpcgss oid_registry nfsv3 nfs nfs_acl lockd sunrpc grace autofs4 CPU: 2 PID: 2385 Comm: tty_fuzz_test Tainted: G O 4.4.193 #1 task: ffffffe32b23f110 task.stack: ffffffe32bda4000 PC is at uart_break_ctl+0x44/0x84 LR is at uart_break_ctl+0x34/0x84 pc : [<ffffff8393196098>] lr : [<ffffff8393196088>] pstate: 80000005 sp : ffffffe32bda7cc0 x29: ffffffe32bda7cc0 x28: ffffffe32b23f110 x27: ffffff8393402000 x26: 0000000000000000 x25: ffffffe32b233f40 x24: ffffffc07a8ec680 x23: 0000000000005425 x22: 00000000ffffffff x21: ffffffe33ed73c98 x20: 0000000000000000 x19: ffffffe33ed94168 x18: 0000000000000004 x17: 0000007f92ae9d30 x16: ffffff8392fa6064 x15: 0000000000000010 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000020 x10: 0000007ffdac1708 x9 : 0000000000000078 x8 : 000000000000001d x7 : 0000000052a64887 x6 : ffffffe32bda7e08 x5 : ffffffe32b23c000 x4 : 0000005fbc5b0000 x3 : ffffff83938d5018 x2 : 0000000000000080 x1 : ffffffe32b23c040 x0 : ffffff83934428f8 virtual start addr offset is 38ac00000 module base offset is 2cd4cf1000 linear region base offset is : 0 Process tty_fuzz_test (pid: 2385, stack limit = 0xffffffe32bda4000) Stack: (0xffffffe32bda7cc0 to 0xffffffe32bda8000) 7cc0: ffffffe32bda7cf0 ffffff8393177718 ffffffc07a8ec680 ffffff8393196054 7ce0: 000000001739f2e0 0000007ffdac1978 ffffffe32bda7d20 ffffff8393179a1c 7d00: 0000000000000000 ffffff8393c0a000 ffffffc07a8ec680 cb88537fdc8ba600 7d20: ffffffe32bda7df0 ffffff8392fa5a40 ffffff8393c0a000 0000000000005425 7d40: 0000007ffdac1978 ffffffe32b233f40 ffffff8393178dcc 0000000000000003 7d60: 000000000000011d 000000000000001d ffffffe32b23f110 000000000000029e 7d80: ffffffe34fe8d5d0 0000000000000000 ffffffe32bda7e14 cb88537fdc8ba600 7da0: ffffffe32bda7e30 ffffff8393042cfc ffffff8393c41720 ffffff8393c46410 7dc0: ffffff839304fa68 ffffffe32b233f40 0000000000005425 0000007ffdac1978 7de0: 000000000000011d cb88537fdc8ba600 ffffffe32bda7e70 ffffff8392fa60cc 7e00: 0000000000000000 ffffffe32b233f40 ffffffe32b233f40 0000000000000003 7e20: 0000000000005425 0000007ffdac1978 ffffffe32bda7e70 ffffff8392fa60b0 7e40: 0000000000000280 ffffffe32b233f40 ffffffe32b233f40 0000000000000003 7e60: 0000000000005425 cb88537fdc8ba600 0000000000000000 ffffff8392e02e78 7e80: 0000000000000280 0000005fbc5b0000 ffffffffffffffff 0000007f92ae9d3c 7ea0: 0000000060000000 0000000000000015 0000000000000003 0000000000005425 7ec0: 0000007ffdac1978 0000000000000000 00000000a54c910e 0000007f92b95014 7ee0: 0000007f92b95090 0000000052a64887 000000000000001d 0000000000000078 7f00: 0000007ffdac1708 0000000000000020 0000000000000000 0000000000000000 7f20: 0000000000000000 0000000000000010 000000556acf0090 0000007f92ae9d30 7f40: 0000000000000004 000000556acdef10 0000000000000000 000000556acdebd0 7f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 7f80: 0000000000000000 0000000000000000 0000000000000000 0000007ffdac1840 7fa0: 000000556acdedcc 0000007ffdac1840 0000007f92ae9d3c 0000000060000000 7fc0: 0000000000000000 0000000000000000 0000000000000003 000000000000001d 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 Call trace: Exception stack(0xffffffe32bda7ab0 to 0xffffffe32bda7bf0) 7aa0: 0000000000001000 0000007fffffffff 7ac0: ffffffe32bda7cc0 ffffff8393196098 0000000080000005 0000000000000025 7ae0: ffffffe32b233f40 ffffff83930d777c ffffffe32bda7b30 ffffff83930d777c 7b00: ffffffe32bda7be0 ffffff83938d5000 ffffffe32bda7be0 ffffffe32bda7c20 7b20: ffffffe32bda7b60 ffffff83930d777c ffffffe32bda7c10 ffffff83938d5000 7b40: ffffffe32bda7c10 ffffffe32bda7c50 ffffff8393c0a000 ffffffe32b23f110 7b60: ffffffe32bda7b70 ffffff8392e09df4 ffffffe32bda7bb0 cb88537fdc8ba600 7b80: ffffff83934428f8 ffffffe32b23c040 0000000000000080 ffffff83938d5018 7ba0: 0000005fbc5b0000 ffffffe32b23c000 ffffffe32bda7e08 0000000052a64887 7bc0: 000000000000001d 0000000000000078 0000007ffdac1708 0000000000000020 7be0: 0000000000000000 0000000000000000 [<ffffff8393196098>] uart_break_ctl+0x44/0x84 [<ffffff8393177718>] send_break+0xa0/0x114 [<ffffff8393179a1c>] tty_ioctl+0xc50/0xe84 [<ffffff8392fa5a40>] do_vfs_ioctl+0xc4/0x6e8 [<ffffff8392fa60cc>] SyS_ioctl+0x68/0x9c [<ffffff8392e02e78>] __sys_trace_return+0x0/0x4 Code: b9410ea0 34000160 f9408aa0 f9402814 (b85fc280) ---[ end trace 8606094f1960c5e0 ]--- Kernel panic - not syncing: Fatal exception Fix this problem by adding NULL checks prior to calling break_ctl ops. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1574263133-28259-1-git-send-email-xiaojiangfeng@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7d73170e1c282576419f8b50a771f1fcd2b81a94 upstream.

Doing fuzz test on sbsa uart device, causes a kernel crash
due to NULL pointer dereference:

------------[ cut here ]------------
Unable to handle kernel paging request at virtual address fffffffffffffffc
pgd = ffffffe331723000
[fffffffffffffffc] *pgd=0000002333595003, *pud=0000002333595003, *pmd=00000
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: ping(O) jffs2 rtos_snapshot(O) pramdisk(O) hisi_sfc(O)
Drv_Nandc_K(O) Drv_SysCtl_K(O) Drv_SysClk_K(O) bsp_reg(O) hns3(O)
hns3_uio_enet(O) hclgevf(O) hclge(O) hnae3(O) mdio_factory(O)
mdio_registry(O) mdio_dev(O) mdio(O) hns3_info(O) rtos_kbox_panic(O)
uart_suspend(O) rsm(O) stp llc tunnel4 xt_tcpudp ipt_REJECT nf_reject_ipv4
iptable_filter ip_tables x_tables sd_mod xhci_plat_hcd xhci_pci xhci_hcd
usbmon usbhid usb_storage ohci_platform ohci_pci ohci_hcd hid_generic hid
ehci_platform ehci_pci ehci_hcd vfat fat usbcore usb_common scsi_mod
yaffs2multi(O) ext4 jbd2 ext2 mbcache ofpart i2c_dev i2c_core uio ubi nand
nand_ecc nand_ids cfi_cmdset_0002 cfi_cmdset_0001 cfi_probe gen_probe
cmdlinepart chipreg mtdblock mtd_blkdevs mtd nfsd auth_rpcgss oid_registry
nfsv3 nfs nfs_acl lockd sunrpc grace autofs4
CPU: 2 PID: 2385 Comm: tty_fuzz_test Tainted: G           O    4.4.193 #1
task: ffffffe32b23f110 task.stack: ffffffe32bda4000
PC is at uart_break_ctl+0x44/0x84
LR is at uart_break_ctl+0x34/0x84
pc : [<ffffff8393196098>] lr : [<ffffff8393196088>] pstate: 80000005
sp : ffffffe32bda7cc0
x29: ffffffe32bda7cc0 x28: ffffffe32b23f110
x27: ffffff8393402000 x26: 0000000000000000
x25: ffffffe32b233f40 x24: ffffffc07a8ec680
x23: 0000000000005425 x22: 00000000ffffffff
x21: ffffffe33ed73c98 x20: 0000000000000000
x19: ffffffe33ed94168 x18: 0000000000000004
x17: 0000007f92ae9d30 x16: ffffff8392fa6064
x15: 0000000000000010 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000020 x10: 0000007ffdac1708
x9 : 0000000000000078 x8 : 000000000000001d
x7 : 0000000052a64887 x6 : ffffffe32bda7e08
x5 : ffffffe32b23c000 x4 : 0000005fbc5b0000
x3 : ffffff83938d5018 x2 : 0000000000000080
x1 : ffffffe32b23c040 x0 : ffffff83934428f8
virtual start addr offset is 38ac00000
module base offset is 2cd4cf1000
linear region base offset is : 0
Process tty_fuzz_test (pid: 2385, stack limit = 0xffffffe32bda4000)
Stack: (0xffffffe32bda7cc0 to 0xffffffe32bda8000)
7cc0: ffffffe32bda7cf0 ffffff8393177718 ffffffc07a8ec680 ffffff8393196054
7ce0: 000000001739f2e0 0000007ffdac1978 ffffffe32bda7d20 ffffff8393179a1c
7d00: 0000000000000000 ffffff8393c0a000 ffffffc07a8ec680 cb88537fdc8ba600
7d20: ffffffe32bda7df0 ffffff8392fa5a40 ffffff8393c0a000 0000000000005425
7d40: 0000007ffdac1978 ffffffe32b233f40 ffffff8393178dcc 0000000000000003
7d60: 000000000000011d 000000000000001d ffffffe32b23f110 000000000000029e
7d80: ffffffe34fe8d5d0 0000000000000000 ffffffe32bda7e14 cb88537fdc8ba600
7da0: ffffffe32bda7e30 ffffff8393042cfc ffffff8393c41720 ffffff8393c46410
7dc0: ffffff839304fa68 ffffffe32b233f40 0000000000005425 0000007ffdac1978
7de0: 000000000000011d cb88537fdc8ba600 ffffffe32bda7e70 ffffff8392fa60cc
7e00: 0000000000000000 ffffffe32b233f40 ffffffe32b233f40 0000000000000003
7e20: 0000000000005425 0000007ffdac1978 ffffffe32bda7e70 ffffff8392fa60b0
7e40: 0000000000000280 ffffffe32b233f40 ffffffe32b233f40 0000000000000003
7e60: 0000000000005425 cb88537fdc8ba600 0000000000000000 ffffff8392e02e78
7e80: 0000000000000280 0000005fbc5b0000 ffffffffffffffff 0000007f92ae9d3c
7ea0: 0000000060000000 0000000000000015 0000000000000003 0000000000005425
7ec0: 0000007ffdac1978 0000000000000000 00000000a54c910e 0000007f92b95014
7ee0: 0000007f92b95090 0000000052a64887 000000000000001d 0000000000000078
7f00: 0000007ffdac1708 0000000000000020 0000000000000000 0000000000000000
7f20: 0000000000000000 0000000000000010 000000556acf0090 0000007f92ae9d30
7f40: 0000000000000004 000000556acdef10 0000000000000000 000000556acdebd0
7f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
7f80: 0000000000000000 0000000000000000 0000000000000000 0000007ffdac1840
7fa0: 000000556acdedcc 0000007ffdac1840 0000007f92ae9d3c 0000000060000000
7fc0: 0000000000000000 0000000000000000 0000000000000003 000000000000001d
7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
Call trace:
Exception stack(0xffffffe32bda7ab0 to 0xffffffe32bda7bf0)
7aa0:                                   0000000000001000 0000007fffffffff
7ac0: ffffffe32bda7cc0 ffffff8393196098 0000000080000005 0000000000000025
7ae0: ffffffe32b233f40 ffffff83930d777c ffffffe32bda7b30 ffffff83930d777c
7b00: ffffffe32bda7be0 ffffff83938d5000 ffffffe32bda7be0 ffffffe32bda7c20
7b20: ffffffe32bda7b60 ffffff83930d777c ffffffe32bda7c10 ffffff83938d5000
7b40: ffffffe32bda7c10 ffffffe32bda7c50 ffffff8393c0a000 ffffffe32b23f110
7b60: ffffffe32bda7b70 ffffff8392e09df4 ffffffe32bda7bb0 cb88537fdc8ba600
7b80: ffffff83934428f8 ffffffe32b23c040 0000000000000080 ffffff83938d5018
7ba0: 0000005fbc5b0000 ffffffe32b23c000 ffffffe32bda7e08 0000000052a64887
7bc0: 000000000000001d 0000000000000078 0000007ffdac1708 0000000000000020
7be0: 0000000000000000 0000000000000000
[<ffffff8393196098>] uart_break_ctl+0x44/0x84
[<ffffff8393177718>] send_break+0xa0/0x114
[<ffffff8393179a1c>] tty_ioctl+0xc50/0xe84
[<ffffff8392fa5a40>] do_vfs_ioctl+0xc4/0x6e8
[<ffffff8392fa60cc>] SyS_ioctl+0x68/0x9c
[<ffffff8392e02e78>] __sys_trace_return+0x0/0x4
Code: b9410ea0 34000160 f9408aa0 f9402814 (b85fc280)
---[ end trace 8606094f1960c5e0 ]---
Kernel panic - not syncing: Fatal exception

Fix this problem by adding NULL checks prior to calling break_ctl ops.

Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1574263133-28259-1-git-send-email-xiaojiangfeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: msm_serial: Fix flow control 2019-12-21T09:34:19+00:00 Jeffrey Hugo jeffrey.l.hugo@gmail.com 2019-10-21T15:46:16+00:00 7a0dbe1a2c939e8aa234c5e302f109c7b44e68bb commit b027ce258369cbfa88401a691c23dad01deb9f9b upstream. hci_qca interfaces to the wcn3990 via a uart_dm on the msm8998 mtp and Lenovo Miix 630 laptop. As part of initializing the wcn3990, hci_qca disables flow, configures the uart baudrate, and then reenables flow - at which point an event is expected to be received over the uart from the wcn3990. It is observed that this event comes after the baudrate change but before hci_qca re-enables flow. This is unexpected, and is a result of msm_reset() being broken. According to the uart_dm hardware documentation, it is recommended that automatic hardware flow control be enabled by setting RX_RDY_CTL. Auto hw flow control will manage RFR based on the configured watermark. When there is space to receive data, the hw will assert RFR. When the watermark is hit, the hw will de-assert RFR. The hardware documentation indicates that RFR can me manually managed via CR when RX_RDY_CTL is not set. SET_RFR asserts RFR, and RESET_RFR de-asserts RFR. msm_reset() is broken because after resetting the hardware, it unconditionally asserts RFR via SET_RFR. This enables flow regardless of the current configuration, and would undo a previous flow disable operation. It should instead de-assert RFR via RESET_RFR to block flow until the hardware is reconfigured. msm_serial should rely on the client to specify that flow should be enabled, either via mctrl() or the termios structure, and only assert RFR in response to those triggers. Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable <stable@vger.kernel.org> Reviewed-by: Andy Gross <agross@kernel.org> Link: https://lore.kernel.org/r/20191021154616.25457-1-jeffrey.l.hugo@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b027ce258369cbfa88401a691c23dad01deb9f9b upstream.

hci_qca interfaces to the wcn3990 via a uart_dm on the msm8998 mtp and
Lenovo Miix 630 laptop.  As part of initializing the wcn3990, hci_qca
disables flow, configures the uart baudrate, and then reenables flow - at
which point an event is expected to be received over the uart from the
wcn3990.  It is observed that this event comes after the baudrate change
but before hci_qca re-enables flow. This is unexpected, and is a result of
msm_reset() being broken.

According to the uart_dm hardware documentation, it is recommended that
automatic hardware flow control be enabled by setting RX_RDY_CTL.  Auto
hw flow control will manage RFR based on the configured watermark.  When
there is space to receive data, the hw will assert RFR.  When the watermark
is hit, the hw will de-assert RFR.

The hardware documentation indicates that RFR can me manually managed via
CR when RX_RDY_CTL is not set.  SET_RFR asserts RFR, and RESET_RFR
de-asserts RFR.

msm_reset() is broken because after resetting the hardware, it
unconditionally asserts RFR via SET_RFR.  This enables flow regardless of
the current configuration, and would undo a previous flow disable
operation.  It should instead de-assert RFR via RESET_RFR to block flow
until the hardware is reconfigured.  msm_serial should rely on the client
to specify that flow should be enabled, either via mctrl() or the termios
structure, and only assert RFR in response to those triggers.

Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Andy Gross <agross@kernel.org>
Link: https://lore.kernel.org/r/20191021154616.25457-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: max310x: Fix tx_empty() callback 2019-12-05T14:26:54+00:00 Alexander Shiyan shc_work@mail.ru 2018-12-19T11:19:20+00:00 4f5897e03e23298ea969503363a8641d4812ce26 [ Upstream commit a8da3c7873ea57acb8f9cea58c0af477522965aa ] Function max310x_tx_empty() accesses the IRQSTS register, which is cleared by IC when reading, so if there is an interrupt status, we will lose it. This patch implement the transmitter check only by the current FIFO level. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a8da3c7873ea57acb8f9cea58c0af477522965aa ]

Function max310x_tx_empty() accesses the IRQSTS register, which is
cleared by IC when reading, so if there is an interrupt status, we
will lose it. This patch implement the transmitter check only by
the current FIFO level.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: mxs-auart: Fix potential infinite loop 2019-11-25T14:54:00+00:00 Anton Vasilyev vasilyev@ispras.ru 2018-08-07T10:59:05+00:00 3b767de18989f8f13bbd3d944b791674a8a1416d [ Upstream commit 5963e8a3122471cadfe0eba41c4ceaeaa5c8bb4d ] On the error path of mxs_auart_request_gpio_irq() is performed backward iterating with index i of enum type. Underline enum type may be unsigned char. In this case check (--i >= 0) will be always true and error handling goes into infinite loop. The patch changes the check so that it is valid for signed and unsigned types. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5963e8a3122471cadfe0eba41c4ceaeaa5c8bb4d ]

On the error path of mxs_auart_request_gpio_irq() is performed
backward iterating with index i of enum type. Underline enum type
may be unsigned char. In this case check (--i >= 0) will be always
true and error handling goes into infinite loop.

The patch changes the check so that it is valid for signed and unsigned
types.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: mctrl_gpio: Check for NULL pointer 2019-11-06T11:09:14+00:00 Adam Ford aford173@gmail.com 2019-10-06T16:33:11+00:00 5290a8f6585b310cb55e393b4f6674f2347de408 [ Upstream commit 37e3ab00e4734acc15d96b2926aab55c894f4d9c ] When using mctrl_gpio_to_gpiod, it dereferences gpios into a single requested GPIO. This dereferencing can break if gpios is NULL, so this patch adds a NULL check before dereferencing it. If gpios is NULL, this function will also return NULL. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20191006163314.23191-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 37e3ab00e4734acc15d96b2926aab55c894f4d9c ]

When using mctrl_gpio_to_gpiod, it dereferences gpios into a single
requested GPIO.  This dereferencing can break if gpios is NULL,
so this patch adds a NULL check before dereferencing it.  If
gpios is NULL, this function will also return NULL.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20191006163314.23191-1-aford173@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
sc16is7xx: Fix for "Unexpected interrupt: 8" 2019-11-06T11:09:11+00:00 Phil Elwell phil@raspberrypi.org 2018-09-12T14:31:56+00:00 548967e6351374b363d78f20d9bbe621c5e9003e [ Upstream commit 30ec514d440cf2c472c8e4b0079af2c731f71a3e ] The SC16IS752 has an Enhanced Feature Register which is aliased at the same address as the Interrupt Identification Register; accessing it requires that a magic value is written to the Line Configuration Register. If an interrupt is raised while the EFR is mapped in then the ISR won't be able to access the IIR, leading to the "Unexpected interrupt" error messages. Avoid the problem by claiming a mutex around accesses to the EFR register, also claiming the mutex in the interrupt handler work item (this is equivalent to disabling interrupts to interlock against a non-threaded interrupt handler). See: https://github.com/raspberrypi/linux/issues/2529 Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 30ec514d440cf2c472c8e4b0079af2c731f71a3e ]

The SC16IS752 has an Enhanced Feature Register which is aliased at the
same address as the Interrupt Identification Register; accessing it
requires that a magic value is written to the Line Configuration
Register. If an interrupt is raised while the EFR is mapped in then
the ISR won't be able to access the IIR, leading to the "Unexpected
interrupt" error messages.

Avoid the problem by claiming a mutex around accesses to the EFR
register, also claiming the mutex in the interrupt handler work
item (this is equivalent to disabling interrupts to interlock against
a non-threaded interrupt handler).

See: https://github.com/raspberrypi/linux/issues/2529

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: uartlite: fix exit path null pointer 2019-10-17T20:41:00+00:00 Randy Dunlap rdunlap@infradead.org 2019-09-16T23:12:23+00:00 858841b7cb12fa2daa32e8726bb5b6037cd26cc5 commit a553add0846f355a28ed4e81134012e4a1e280c2 upstream. Call uart_unregister_driver() conditionally instead of unconditionally, only if it has been previously registered. This uses driver.state, just as the sh-sci.c driver does. Fixes this null pointer dereference in tty_unregister_driver(), since the 'driver' argument is null: general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:tty_unregister_driver+0x25/0x1d0 Fixes: 238b8721a554 ("[PATCH] serial uartlite driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org> Cc: Peter Korsgaard <jacmet@sunsite.dk> Link: https://lore.kernel.org/r/9c8e6581-6fcc-a595-0897-4d90f5d710df@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a553add0846f355a28ed4e81134012e4a1e280c2 upstream.

Call uart_unregister_driver() conditionally instead of
unconditionally, only if it has been previously registered.

This uses driver.state, just as the sh-sci.c driver does.

Fixes this null pointer dereference in tty_unregister_driver(),
since the 'driver' argument is null:

  general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
  RIP: 0010:tty_unregister_driver+0x25/0x1d0

Fixes: 238b8721a554 ("[PATCH] serial uartlite driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Link: https://lore.kernel.org/r/9c8e6581-6fcc-a595-0897-4d90f5d710df@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty/serial: atmel: reschedule TX after RX was started 2019-09-21T05:12:48+00:00 Razvan Stefanescu razvan.stefanescu@microchip.com 2019-08-13T07:40:25+00:00 441bb21e68de0ee84e974bb0127bebf9aa1c007b commit d2ace81bf902a9f11d52e59e5d232d2255a0e353 upstream. When half-duplex RS485 communication is used, after RX is started, TX tasklet still needs to be scheduled tasklet. This avoids console freezing when more data is to be transmitted, if the serial communication is not closed. Fixes: 69646d7a3689 ("tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped") Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190813074025.16218-1-razvan.stefanescu@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d2ace81bf902a9f11d52e59e5d232d2255a0e353 upstream.

When half-duplex RS485 communication is used, after RX is started, TX
tasklet still needs to be  scheduled tasklet. This avoids console freezing
when more data is to be transmitted, if the serial communication is not
closed.

Fixes: 69646d7a3689 ("tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped")
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190813074025.16218-1-razvan.stefanescu@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>