linux-stable.git/drivers/tty/serial, branch v4.4.185

sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg

2019-06-22T06:18:25+00:00

[ Upstream commit 07a6d63eb1b54b5fb38092780fe618dfe1d96e23 ]

In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS"
to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged.

This results in the hypervisor console device to be listed as "ttyHV0" under
/proc/consoles while the device node is still named "ttyS0":

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyS0
root@osaka:~#

This means that any userland code which tries to determine the name of the
device file of the hypervisor console device can not rely on the information
provided by /proc/consoles. In particular, booting current versions of debian-
installer inside a SPARC LDOM will fail with the installer unable to determine
the console device.

After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well,
the inconsistency is fixed and it is possible again to determine the name
of the device file of the hypervisor console device by reading the contents
of /proc/console:

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyHV0
root@osaka:~#

With this change, debian-installer works correctly when installing inside
a SPARC LDOM.

Signed-off-by: John Paul Adrian Glaubitz 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

dmaengine: idma64: Use actual device for DMA transfers

2019-06-22T06:18:21+00:00

[ Upstream commit 5ba846b1ee0792f5a596b9b0b86d6e8cdebfab06 ]

Intel IOMMU, when enabled, tries to find the domain of the device,
assuming it's a PCI one, during DMA operations, such as mapping or
unmapping. Since we are splitting the actual PCI device to couple of
children via MFD framework (see drivers/mfd/intel-lpss.c for details),
the DMA device appears to be a platform one, and thus not an actual one
that performs DMA. In a such situation IOMMU can't find or allocate
a proper domain for its operations. As a result, all DMA operations are
failed.

In order to fix this, supply parent of the platform device
to the DMA engine framework and fix filter functions accordingly.

We may rely on the fact that parent is a real PCI device, because no
other configuration is present in the wild.

Signed-off-by: Andy Shevchenko 
Acked-by: Mark Brown 
Acked-by: Greg Kroah-Hartman  [for tty parts]
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

tty: max310x: Fix external crystal register setup

2019-06-11T10:24:10+00:00

commit 5d24f455c182d5116dd5db8e1dc501115ecc9c2c upstream.

The datasheet states:

  Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
(crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
clocking
  Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
oscillator. When using an external clock source at XIN, CrystalEn must
be set low.

The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.

This was required to make the MAX3107 with an external crystal on our
board able to send or receive data.

Signed-off-by: Joe Burmeister 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty: serial: msm_serial: Fix XON/XOFF

2019-06-11T10:24:10+00:00

commit 61c0e37950b88bad590056286c1d766b1f167f4e upstream.

When the tty layer requests the uart to throttle, the current code
executing in msm_serial will trigger "Bad mode in Error Handler" and
generate an invalid stack frame in pstore before rebooting (that is if
pstore is indeed configured: otherwise the user shall just notice a
reboot with no further information dumped to the console).

This patch replaces the PIO byte accessor with the word accessor
already used in PIO mode.

Fixes: 68252424a7c7 ("tty: serial: msm: Support big-endian CPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Jorge Ramirez-Ortiz 
Reviewed-by: Bjorn Andersson 
Reviewed-by: Stephen Boyd 
Signed-off-by: Greg Kroah-Hartman

sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()

2019-05-16T17:44:57+00:00

[ Upstream commit ac0cdb3d990108df795b676cd0d0e65ac34b2273 ]

Add the missing uart_unregister_driver() and i2c_del_driver() before return
from sc16is7xx_init() in the error handling case.

Signed-off-by: Mao Wenan 
Reviewed-by: Vladimir Zapolskiy 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin (Microsoft)

serial: uartps: console_setup() can't be placed to init section

2019-04-27T07:33:58+00:00

[ Upstream commit 4bb1ce2350a598502b23088b169e16b43d4bc639 ]

When console device is rebinded, console_setup() is called again.
But marking it as __init means that function will be clear after boot is
complete. If console device is binded again console_setup() is not found
and error "Unable to handle kernel paging request at virtual address"
is reported.

Signed-off-by: Michal Simek 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped

2019-04-27T07:33:47+00:00

commit 69646d7a3689fbe1a65ae90397d22ac3f1b8d40f upstream.

In half-duplex operation, RX should be started after TX completes.

If DMA is used, there is a case when the DMA transfer completes but the
TX FIFO is not emptied, so the RX cannot be restarted just yet.

Use a boolean variable to store this state and rearm TX interrupt mask
to be signaled again that the transfer finished. In interrupt transmit
handler this variable is used to start RX. A warning message is generated
if RX is activated before TX fifo is cleared.

Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable
RX after TX is done")
Signed-off-by: Razvan Stefanescu 
Acked-by: Richard Genoud 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty/serial: atmel: Add is_half_duplex helper

2019-04-27T07:33:47+00:00

commit f3040983132bf3477acd45d2452a906e67c2fec9 upstream.

Use a helper function to check that a port needs to use half duplex
communication, replacing several occurrences of multi-line bit checking.

Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done")
Cc: stable 
Signed-off-by: Razvan Stefanescu 
Acked-by: Richard Genoud 
Signed-off-by: Greg Kroah-Hartman

Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc

2019-04-03T04:23:28+00:00

commit 3ec8002951ea173e24b466df1ea98c56b7920e63 upstream.

Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such
device” error.

This is caused by function "configure_kgdboc" who init err to ENODEV
when the config is empty (legal input) the code go out with ENODEV
returned.

Fixes: 2dd453168643 ("kgdboc: Fix restrict error")
Signed-off-by: Wentao Wang 
Cc: stable 
Acked-by: Daniel Thompson 
Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: Fix setting SCSCR_TIE while transferring data

2019-04-03T04:23:27+00:00

commit 93bcefd4c6bad4c69dbc4edcd3fbf774b24d930d upstream.

We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted
(if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer,
re-enable the SCSCR_TIE bit, which was done at sci_start_tx().
This is unnecessary processing, wasting CPU operation if the data transmission length is large.
And further, transmit end, FIFO empty bits disabling have also been performed in the step above.

Signed-off-by: Hoan Nguyen An 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman