linux-stable.git/drivers/tty/serial, branch v4.16.3

serial: 8250: Add Nuvoton NPCM UART

2018-04-08T12:29:49+00:00

commit f597fbce38d230af95384f4a04e0a13a1d0ad45d upstream.

The Nuvoton UART is almost compatible with the 8250 driver when probed
via the 8250_of driver, however it requires some extra configuration
at startup.

Reviewed-by: Rob Herring 
Signed-off-by: Joel Stanley 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

serial: imx: fix bogus dev_err

2018-02-28T12:48:21+00:00

Only one of the two is really required, not both:
* have_rtscts or
* have_rtsgpio

In imx_rs485_config() this is done correctly, so RS485 is working,
just the error message is false.

Signed-off-by: Phil Eichinger 
Reviewed-by: Fabio Estevam 
Fixes: b8f3bff057b0 ("serial: imx: Support common rs485 binding for RTS polarity"
Acked-by: Uwe Kleine-KÃ¶nig 
Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: prevent lockup on full TTY buffers

2018-02-28T12:48:21+00:00

When the TTY buffers fill up to the configured maximum, a system lockup
occurs:

[  598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks:
[  598.825796]  0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1
[  598.832577]  (detected by 3, t=62517 jiffies, g=296, c=295, q=126)
[  598.838755] Task dump for CPU 0:
[  598.841977] swapper/0       R  running task        0     0      0 0x00000022
[  598.849023] Call trace:
[  598.851476]  __switch_to+0x98/0xb0
[  598.854870]            (null)

This can be prevented by doing a dummy read of the RX data register.

This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0;
reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms
as well.

Reported-by: Yoshihiro Shimoda 
Signed-off-by: Ulrich Hecht 
Reviewed-by: Geert Uytterhoeven 
Cc: stable 
Tested-by: Nguyen Viet Dung 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Add Brainboxes UC-260 4 port serial device

2018-02-28T12:48:21+00:00

Add PCI ids for two variants of Brainboxes UC-260 quad port
PCI serial cards.

Suggested-by: Andy Shevchenko 
Signed-off-by: Nikola Ciprich 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

earlycon: add reg-offset to physical address before mapping

2018-02-28T12:48:21+00:00

It will get the wrong virtual address because port->mapbase is not added
the correct reg-offset yet. We have to update it before earlycon_map()
is called

Signed-off-by: Greentime Hu 
Acked-by: Arnd Bergmann 
Cc: Peter Hurley 
Cc: stable@vger.kernel.org
Fixes: 088da2a17619 ("of: earlycon: Initialize port fields from DT properties")
Acked-by: Rob Herring 
Signed-off-by: Greg Kroah-Hartman

serial: core: mark port as initialized in autoconfig

2018-02-28T12:48:21+00:00

This is a followup on 44117a1d1732 ("serial: core: mark port as
initialized after successful IRQ change").
Nikola has been using autoconfig via setserial and reported a crash
similar to what I fixed in the earlier mentioned commit. Here I do the
same fixup for the autoconfig. I wasn't sure that this is the right
approach. Nikola confirmed that it fixes his crash.

Fixes: b3b576461864 ("tty: serial_core: convert uart_open to use tty_port_open")
Link: http://lkml.kernel.org/r/20180131072000.GD1853@localhost.localdomain
Reported-by: Nikola Ciprich 
Tested-by: Nikola Ciprich 
Cc: 
Signed-off-by: Sebastian Andrzej Siewior 
Tested-by: Nikola Ciprich 
Acked-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Don't fail on multiport card class

2018-02-28T12:48:21+00:00

Do not fail on multiport cards in serial_pci_is_class_communication().

It restores behaviour for SUNIX multiport cards, that enumerated by
class and have a custom board data.

Moreover it allows users to reenumerate port-by-port from user space.

Fixes: 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list")
Reported-by: Nikola Ciprich 
Signed-off-by: Andy Shevchenko 
Tested-by: Nikola Ciprich 
Signed-off-by: Greg Kroah-Hartman

tty/serial: atmel: add new version check for usart

2018-02-28T12:48:20+00:00

On our at91sam9260 based board the usart0 and usart1 ports report
their versions (ATMEL_US_VERSION) as 0x10302. This version is not
included in the current checks in the driver.

Signed-off-by: Jonas Danielsson 
Acked-by: Richard Genoud 
Acked-by: Nicolas Ferre 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2018-02-09T17:44:25+00:00

Pull more ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups, a few new quirks, a couple of
  updates related to the handling of ACPI tables and ACPICA copyrights
  refreshment.

  Specifics:

   - Update the ACPICA kernel code to upstream revision 20180105
     including:
       * Assorted fixes (Jung-uk Kim)
       * Support for X32 ABI compilation (Anuj Mittal)
       * Update of ACPICA copyrights to 2018 (Bob Moore)

   - Prepare for future modifications to avoid executing the _STA
     control method too early (Hans de Goede)

   - Make the processor performance control library code ignore _PPC
     notifications if they cannot be handled and fix up the C1 idle
     state definition when it is used as a fallback state (Chen Yu,
     Yazen Ghannam)

   - Make it possible to use the SPCR table on x86 and to replace the
     original IORT table with a new one from initrd (Prarit Bhargava,
     Shunyong Yang)

   - Add battery-related quirks for Asus UX360UA and UX410UAK and add
     quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai
     Heng Feng)

   - Address static checker warnings in the CPPC code (Gustavo Silva)

   - Avoid printing a raw pointer to the kernel log in the smart battery
     driver (Greg Kroah-Hartman)"

* tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sbshc: remove raw pointer from printk() message
  ACPI: SPCR: Make SPCR available to x86
  ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
  ACPI / tables: Add IORT to injectable table list
  ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
  ACPICA: Update version to 20180105
  ACPICA: All acpica: Update copyrights to 2018
  ACPI / processor: Set default C1 idle state description
  ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
  ACPI: processor_perflib: Do not send _PPC change notification if not ready
  ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
  ACPI / bus: Do not call _STA on battery devices with unmet dependencies
  PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
  ACPI: export acpi_bus_get_status_handle()
  ACPICA: Add a missing pair of parentheses
  ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
  ACPICA: Avoid NULL pointer arithmetic
  ACPICA: Linux: add support for X32 ABI compilation
  ACPI / video: Use true for boolean value

ACPI: SPCR: Make SPCR available to x86

2018-02-07T10:39:58+00:00

SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup
an early console.

General fixes include updating Documentation & Kconfig (for x86),
updating comments, and changing parse_spcr() to acpi_parse_spcr(),
and earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be
more descriptive.

On x86, many systems have a valid SPCR table but the table version is
not 2 so the table version check must be a warning.

On ARM64 when the kernel parameter earlycon is used both the early console
and console are enabled.  On x86, only the earlycon should be enabled by
by default.  Modify acpi_parse_spcr() to allow options for initializing
the early console and console separately.

Signed-off-by: Prarit Bhargava 
Acked-by: Ingo Molnar 
Reviewed-by: Mark Salter 
Tested-by: Mark Salter 
Signed-off-by: Rafael J. Wysocki