linux-stable.git/drivers/tty/serial, branch v4.14.331

tty: 8250: Add support for Intashield IS-100

2023-11-08T10:21:10+00:00

commit 4d994e3cf1b541ff32dfb03fbbc60eea68f9645b upstream.

Add support for the Intashield IS-100 1 port serial card.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams 
Link: https://lore.kernel.org/r/DU0PR02MB7899A0E0CDAA505AF5A874CDC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman

tty: 8250: Add support for Brainboxes UP cards

2023-11-08T10:21:10+00:00

commit 2c6fec1e1532f15350be7e14ba6b88a39d289fe4 upstream.

Add support for the Brainboxes UP (powered PCI) range of
cards, namely UP-189, UP-200, UP-869 and UP-880.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams 
Link: https://lore.kernel.org/r/DU0PR02MB7899B5B59FF3D8587E88C117C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman

tty: 8250: Add support for additional Brainboxes UC cards

2023-11-08T10:21:10+00:00

commit c563db486db7d245c0e2f319443417ae8e692f7f upstream.

Add device IDs for some more Brainboxes UC cards, namely
UC-235/UC-246, UC-253/UC-734, UC-302, UC-313, UC-346, UC-357,
UC-607 and UC-836.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams 
Link: https://lore.kernel.org/r/DU0PR02MB789969998A6C3FAFCD95C85DC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman

tty: 8250: Remove UC-257 and UC-431

2023-11-08T10:21:10+00:00

commit 33092fb3af51deb80849e90a17bada44bbcde6b3 upstream.

The UC-257 is a serial + LPT card, so remove it from this driver.
A patch has been submitted to add it to parport_serial instead.

Additionaly, the UC-431 does not use this card ID, only the UC-420
does. The 431 is a 3-port card and there is no generic 3-port configuration
available, so remove reference to it from this driver.

Fixes: 152d1afa834c ("tty: Add support for Brainboxes UC cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams 
Link: https://lore.kernel.org/r/DU0PR02MB78995ADF7394C74AD4CF3357C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman

serial: 8250_port: Check IRQ data before use

2023-10-10T19:43:40+00:00

commit cce7fc8b29961b64fadb1ce398dc5ff32a79643b upstream.

In case the leaf driver wants to use IRQ polling (irq = 0) and
IIR register shows that an interrupt happened in the 8250 hardware
the IRQ data can be NULL. In such a case we need to skip the wake
event as we came to this path from the timer interrupt and quite
likely system is already awake.

Without this fix we have got an Oops:

    serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A
    ...
    BUG: kernel NULL pointer dereference, address: 0000000000000010
    RIP: 0010:serial8250_handle_irq+0x7c/0x240
    Call Trace:
     ? serial8250_handle_irq+0x7c/0x240
     ? __pfx_serial8250_timeout+0x10/0x10

Fixes: 0ba9e3a13c6a ("serial: 8250: Add missing wakeup event reporting")
Cc: stable 
Signed-off-by: Andy Shevchenko 
Reviewed-by: Florian Fainelli 
Link: https://lore.kernel.org/r/20230831222555.614426-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

serial: cpm_uart: Avoid suspicious locking

2023-09-23T08:47:05+00:00

[ Upstream commit 36ef11d311f405e55ad8e848c19b212ff71ef536 ]

  CHECK   drivers/tty/serial/cpm_uart/cpm_uart_core.c
drivers/tty/serial/cpm_uart/cpm_uart_core.c:1271:39: warning: context imbalance in 'cpm_uart_console_write' - unexpected unlock

Allthough 'nolock' is not expected to change, sparse find the following
form suspicious:

	if (unlikely(nolock)) {
		local_irq_save(flags);
	} else {
		spin_lock_irqsave(&pinfo->port.lock, flags);
	}

	cpm_uart_early_write(pinfo, s, count, true);

	if (unlikely(nolock)) {
		local_irq_restore(flags);
	} else {
		spin_unlock_irqrestore(&pinfo->port.lock, flags);
	}

Rewrite it a more obvious form:

	if (unlikely(oops_in_progress)) {
		local_irq_save(flags);
		cpm_uart_early_write(pinfo, s, count, true);
		local_irq_restore(flags);
	} else {
		spin_lock_irqsave(&pinfo->port.lock, flags);
		cpm_uart_early_write(pinfo, s, count, true);
		spin_unlock_irqrestore(&pinfo->port.lock, flags);
	}

Signed-off-by: Christophe Leroy 
Link: https://lore.kernel.org/r/f7da5cdc9287960185829cfef681a7d8614efa1f.1691068700.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: tegra: handle clk prepare error in tegra_uart_hw_init()

2023-09-23T08:46:58+00:00

[ Upstream commit 5abd01145d0cc6cd1b7c2fe6ee0b9ea0fa13671e ]

In tegra_uart_hw_init(), the return value of clk_prepare_enable() should
be checked since it might fail.

Fixes: e9ea096dd225 ("serial: tegra: add serial driver")
Signed-off-by: Yi Yang 
Link: https://lore.kernel.org/r/20230817105406.228674-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: sc16is7xx: fix bug when first setting GPIO direction

2023-09-23T08:46:52+00:00

commit 9baeea723c0fb9c3ba9a336369f758ed9bc6831d upstream.

When configuring a pin as an output pin with a value of logic 0, we
end up as having a value of logic 1 on the output pin. Setting a
logic 0 a second time (or more) after that will correctly output a
logic 0 on the output pin.

By default, all GPIO pins are configured as inputs. When we enter
sc16is7xx_gpio_direction_output() for the first time, we first set the
desired value in IOSTATE, and then we configure the pin as an output.
The datasheet states that writing to IOSTATE register will trigger a
transfer of the value to the I/O pin configured as output, so if the
pin is configured as an input, nothing will be transferred.

Therefore, set the direction first in IODIR, and then set the desired
value in IOSTATE.

This is what is done in NXP application note AN10587.

Fixes: dfeae619d781 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve 
Reviewed-by: Lech Perczak 
Tested-by: Lech Perczak 
Link: https://lore.kernel.org/r/20230807214556.540627-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman

serial: 8250: Fix oops for port->pm on uart_change_pm()

2023-08-30T14:35:13+00:00

commit dfe2aeb226fd5e19b0ee795f4f6ed8bc494c1534 upstream.

Unloading a hardware specific 8250 driver can produce error "Unable to
handle kernel paging request at virtual address" about ten seconds after
unloading the driver. This happens on uart_hangup() calling
uart_change_pm().

Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port
specific driver unbind") was only a partial fix. If the hardware specific
driver has initialized port->pm function, we need to clear port->pm too.
Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
will call port->pm() instead of serial8250_do_pm().

Fixes: 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind")
Signed-off-by: Tony Lindgren 
Link: https://lore.kernel.org/r/20230804131553.52927-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman

serial: atmel: don't enable IRQs prematurely

2023-08-11T09:33:47+00:00

commit 27a826837ec9a3e94cc44bd9328b8289b0fcecd7 upstream.

The atmel_complete_tx_dma() function disables IRQs at the start
of the function by calling spin_lock_irqsave(&port->lock, flags);
There is no need to disable them a second time using the
spin_lock_irq() function and, in fact, doing so is a bug because
it will enable IRQs prematurely when we call spin_unlock_irq().

Just use spin_lock/unlock() instead without disabling or enabling
IRQs.

Fixes: 08f738be88bb ("serial: at91: add tx dma support")
Signed-off-by: Dan Carpenter 
Reviewed-by: Jiri Slaby 
Acked-by: Richard Genoud 
Link: https://lore.kernel.org/r/cb7c39a9-c004-4673-92e1-be4e34b85368@moroto.mountain
Cc: stable 
Signed-off-by: Greg Kroah-Hartman