linux-stable.git/drivers/tty/serial, branch v3.18.9

serial: fsl_lpuart: avoid new transfer while DMA is running

2015-03-06T22:53:01+00:00

commit 5f1437f61a0b351d25b528c159360da3d5e8c77b upstream.

When the UART is in DMA receive mode (RDMAS set) and one character
just arrived while another interrupt is handled (e.g. TX), the RDRF
(receiver data register full flag) is set due to the water level of
1. But since the DMA will take care of this character, there is no
need to handle it by calling lpuart_prepare_rx. Handling it leads to
adding the RX timeout timer twice:

[   74.336698] Kernel BUG at 80053070 [verbose debug info unavailable]
[   74.342999] Internal error: Oops - BUG: 0 [#1] ARM0:00.00 khungtaskd
[   74.347817] Modules linked in:    0 S  0.0  0.0   0:00.00 writeback
[   74.350926] CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00001-g39d78e2 #1788
[   74.358617] Hardware name: Freescale Vybrid VF610 (Device Tree)t
[   74.364563] task: 807a7678 ti: 8079c000 task.ti: 8079c000 kblockd
[   74.370002] PC is at add_timer+0x24/0x28.0  0.0   0:00.09 kworker/u2:1
[   74.373960] LR is at lpuart_int+0x15c/0x3d8
[   74.378171] pc : [<80053070>]    lr : [<802e0d88>]    psr: a0010193
[   74.378171] sp : 8079de10  ip : 8079de20  fp : 8079de1c
[   74.389694] r10: 807d44c0  r9 : 8688c300  r8 : 00000013
[   74.394943] r7 : 20010193  r6 : 00000000  r5 : 000000a0  r4 : 86997210
[   74.401498] r3 : ffffa7da  r2 : 80817868  r1 : 86997210  r0 : 86997344
[   74.408052] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[   74.415489] Control: 10c5387d  Table: 8611c059  DAC: 00000015
[   74.421265] Process swapper (pid: 0, stack limit = 0x8079c230)
...

Solve this by only execute the receiver path (lpuart_prepare_rx) if
the DMA receive mode (RDMAS) is not set. Also, make sure the flag is
cleared on initialization, in case it has been left set.

This can be best reproduced using UART as a serial console, then
running top while dd'ing data into the terminal.

Signed-off-by: Stefan Agner 
Signed-off-by: Greg Kroah-Hartman

serial: fsl_lpuart: delete timer on shutdown

2015-03-06T22:53:01+00:00

commit 4a8588a1cf867333187d9ff071e6fbdab587d194 upstream.

If the serial port gets closed while a RX transfer is in progress,
the timer might fire after the serial port shutdown finished. This
leads in a NULL pointer dereference:

[    7.508324] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[    7.516590] pgd = 86348000
[    7.519445] [00000000] *pgd=86179831, *pte=00000000, *ppte=00000000
[    7.526145] Internal error: Oops: 17 [#1] ARM
[    7.530611] Modules linked in:
[    7.533876] CPU: 0 PID: 123 Comm: systemd Not tainted 3.19.0-rc3-00004-g5b11ea7 #1778
[    7.541827] Hardware name: Freescale Vybrid VF610 (Device Tree)
[    7.547862] task: 861c3400 ti: 86ac8000 task.ti: 86ac8000
[    7.553392] PC is at lpuart_timer_func+0x24/0xf8
[    7.558127] LR is at lpuart_timer_func+0x20/0xf8
[    7.562857] pc : [<802df99c>]    lr : [<802df998>]    psr: 600b0113
[    7.562857] sp : 86ac9b90  ip : 86ac9b90  fp : 86ac9bbc
[    7.574467] r10: 80817180  r9 : 80817b98  r8 : 80817998
[    7.579803] r7 : 807acee0  r6 : 86989000  r5 : 00000100  r4 : 86997210
[    7.586444] r3 : 86ac8000  r2 : 86ac9bc0  r1 : 86997210  r0 : 00000000
[    7.593085] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    7.600341] Control: 10c5387d  Table: 86348059  DAC: 00000015
[    7.606203] Process systemd (pid: 123, stack limit = 0x86ac8230)

Setup the timer on UART startup which allows to delete the timer
unconditionally on shutdown. This also saves the initialization
on each transfer.

Signed-off-by: Stefan Agner 
Signed-off-by: Greg Kroah-Hartman

tty/serial: at91: fix error handling in atmel_serial_probe()

2015-03-06T22:52:59+00:00

commit 6fbb9bdf0f3fbe23aeff806489791aa876adaffb upstream.

-EDEFER error wasn't handle properly by atmel_serial_probe().
As an example, when atmel_serial_probe() is called for the first time, we pass
the test_and_set_bit() test to check whether the port has already been
initalized. Then we call atmel_init_port(), which may return -EDEFER, possibly
returned before by clk_get(). Consequently atmel_serial_probe() used to return
this error code WITHOUT clearing the port bit in the "atmel_ports_in_use" mask.
When atmel_serial_probe() was called for the second time, it used to fail on
the test_and_set_bit() function then returning -EBUSY.

When atmel_serial_probe() fails, this patch make it clear the port bit in the
"atmel_ports_in_use" mask, if needed, before returning the error code.

Signed-off-by: Cyrille Pitchen 
Acked-by: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman

serial: fix parisc boot hang

2015-01-27T16:29:39+00:00

commit 68ed7e1c3d236e9e1e60ed6cae22f2c1c4ba2952 upstream.

This is a partial revert of 2f2dafe (serial: serial_core.c: printk
replacement) which gets us booting again.  The real problem seems to be
the _emit path in early boot.  However, until we can root cause it, we
need at least to get boot working.

Fixes: 2f2dafe77df2c78e189a9fa6b1879dffd06ae5a1
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

serial: samsung: wait for transfer completion before clock disable

2015-01-16T14:59:52+00:00

commit 1ff383a4c3eda8893ec61b02831826e1b1f46b41 upstream.

This patch adds waiting until transmit buffer and shifter will be empty
before clock disabling.

Without this fix it's possible to have clock disabled while data was
not transmited yet, which causes unproper state of TX line and problems
in following data transfers.

Signed-off-by: Robert Baldyga 
Signed-off-by: Greg Kroah-Hartman

tty: serial: men_z135_uart: Add terminating entry for men_z135_ids

2015-01-16T14:59:52+00:00

commit 6b1f40cf4840820051d69646af0b6503878cb1bc upstream.

The mcb_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin 
Signed-off-by: Greg Kroah-Hartman

Revert "serial: of-serial: add PM suspend/resume support"

2014-11-25T20:46:39+00:00

This reverts commit 2dea53bf57783f243c892e99c10c6921e956aa7e.

Turns out to be broken :(

Cc: Jingchang Lu 
Cc: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

serial: of-serial: fix uninitialized kmalloc variable

2014-11-06T04:12:02+00:00

The info pointer points to an uninitialized kmalloced space.
If a device doesn't have clk property, then info->clk may
have unpredicated value and cause call trace. So use kzalloc
to make sure it is NULL initialized.

Signed-off-by: Jingchang Lu 
Acked-by: Arnd Bergmann

tty: serial: 8250_mtk: Fix quot calculation

2014-11-06T04:12:02+00:00

The calculation of value quot for highspeed register set to three
was wrong. This patch fixes the calculation so that the serial port
for baudrates bigger then 576000 baud is working correctly.

Signed-off-by: Matthias Brugger 
Signed-off-by: Greg Kroah-Hartman

serial: Fix divide-by-zero fault in uart_get_divisor()

2014-11-06T00:14:09+00:00

uart_get_baud_rate() will return baud == 0 if the max rate is set
to the "magic" 38400 rate and the SPD_* flags are also specified.
On the first iteration, if the current baud rate is higher than the
max, the baud rate is clamped at the max (which in the degenerate
case is 38400). On the second iteration, the now-"magic" 38400 baud
rate selects the possibly higher alternate baud rate indicated by
the SPD_* flag. Since only two loop iterations are performed, the
loop is exited, a kernel WARNING is generated and a baud rate of
0 is returned.

Reproducible with:
 setserial /dev/ttyS0 spd_hi base_baud 38400

Only perform the "magic" 38400 -> SPD_* baud transform on the first
loop iteration, which prevents the degenerate case from recognizing
the clamped baud rate as the "magic" 38400 value.

Reported-by: Robert Święcki 
Cc:  # all
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman