linux-stable.git/drivers/tty/serial, branch v3.16.72 Linux kernel stable tree serial: sh-sci: Fix setting SCSCR_TIE while transferring data 2019-08-13T11:38:47+00:00 Hoan Nguyen An na-hoan@jinso.co.jp 2019-03-18T09:26:32+00:00 fe9f6d5757be34c153f3c167843a53547d238c6c commit 93bcefd4c6bad4c69dbc4edcd3fbf774b24d930d upstream. We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted (if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer, re-enable the SCSCR_TIE bit, which was done at sci_start_tx(). This is unnecessary processing, wasting CPU operation if the data transmission length is large. And further, transmit end, FIFO empty bits disabling have also been performed in the step above. Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 93bcefd4c6bad4c69dbc4edcd3fbf774b24d930d upstream.

We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted
(if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer,
re-enable the SCSCR_TIE bit, which was done at sci_start_tx().
This is unnecessary processing, wasting CPU operation if the data transmission length is large.
And further, transmit end, FIFO empty bits disabling have also been performed in the step above.

Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
tty: mxs-auart: fix a potential NULL pointer dereference 2019-08-13T11:38:47+00:00 Kangjie Lu kjlu@umn.edu 2019-03-14T07:21:51+00:00 9169957cdf06f2ff96f13d9719741c7528f37818 commit 6734330654dac550f12e932996b868c6d0dcb421 upstream. In case ioremap fails, the fix returns -ENOMEM to avoid NULL pointer dereferences. Multiple places use port.membase. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: There is no out_disable_clks label, so goto out_free_clk on error] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 6734330654dac550f12e932996b868c6d0dcb421 upstream.

In case ioremap fails, the fix returns -ENOMEM to avoid NULL
pointer dereferences.
Multiple places use port.membase.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: There is no out_disable_clks label, so goto
 out_free_clk on error]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
tty: atmel_serial: fix a potential NULL pointer dereference 2019-08-13T11:38:46+00:00 Kangjie Lu kjlu@umn.edu 2019-03-15T17:16:06+00:00 cf592ae629558dba003094192c667c74f4cc670c commit c85be041065c0be8bc48eda4c45e0319caf1d0e5 upstream. In case dmaengine_prep_dma_cyclic fails, the fix returns a proper error code to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Fixes: 34df42f59a60 ("serial: at91: add rx dma support") Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit c85be041065c0be8bc48eda4c45e0319caf1d0e5 upstream.

In case dmaengine_prep_dma_cyclic fails, the fix returns a proper
error code to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
serial: max310x: Fix to avoid potential NULL pointer dereference 2019-08-13T11:38:46+00:00 Aditya Pakki pakki001@umn.edu 2019-03-18T23:44:14+00:00 22230045cf8128435150a12d0b4ee4c41311600d commit 3a10e3dd52e80b9a97a3346020024d17b2c272d6 upstream. of_match_device can return a NULL pointer when matching device is not found. This patch avoids a scenario causing NULL pointer derefernce. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 3a10e3dd52e80b9a97a3346020024d17b2c272d6 upstream.

of_match_device can return a NULL pointer when matching device is not
found. This patch avoids a scenario causing NULL pointer derefernce.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
serial: 8250_of: assume reg-shift of 2 for mrvl,mmp-uart 2019-07-09T21:04:08+00:00 Lubomir Rintel lkundrak@v3.sk 2019-02-24T12:00:53+00:00 8b897efd7bfbe26205602083c8ab5e7b5f4eac91 commit f4817843e39ce78aace0195a57d4e8500a65a898 upstream. There are two other drivers that bind to mrvl,mmp-uart and both of them assume register shift of 2 bits. There are device trees that lack the property and rely on that assumption. If this driver wins the race to bind to those devices, it should behave the same as the older deprecated driver. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit f4817843e39ce78aace0195a57d4e8500a65a898 upstream.

There are two other drivers that bind to mrvl,mmp-uart and both of them
assume register shift of 2 bits. There are device trees that lack the
property and rely on that assumption.

If this driver wins the race to bind to those devices, it should behave
the same as the older deprecated driver.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup() 2019-07-09T21:04:01+00:00 Jay Dolan jay.dolan@accesio.com 2019-02-13T05:43:12+00:00 0f2e97b3ae782285a798f70b66fb6aac384a953b commit 78d3820b9bd39028727c6aab7297b63c093db343 upstream. The four port Pericom chips have the fourth port at the wrong address. Make use of quirk to fix it. Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 78d3820b9bd39028727c6aab7297b63c093db343 upstream.

The four port Pericom chips have the fourth port at the wrong address.
Make use of quirk to fix it.

Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards")
Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
serial: 8250_pci: Fix number of ports for ACCES serial cards 2019-07-09T21:04:01+00:00 Jay Dolan jay.dolan@accesio.com 2019-02-13T05:43:11+00:00 c48a2fd37a6be1c6323c42311c3b2324eb82315b commit b896b03bc7fce43a07012cc6bf5e2ab2fddf3364 upstream. Have the correct number of ports created for ACCES serial cards. Two port cards show up as four ports, and four port cards show up as eight. Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit b896b03bc7fce43a07012cc6bf5e2ab2fddf3364 upstream.

Have the correct number of ports created for ACCES serial cards. Two port
cards show up as four ports, and four port cards show up as eight.

Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards")
Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
uart: Fix crash in uart_write and uart_put_char 2019-05-02T20:41:25+00:00 Samir Virmani samir@embedur.com 2019-01-16T18:28:07+00:00 70e2dab6a1e716ae8a75c3a6e60958ecdcd17961 commit aff9cf5955185d1f183227e46c5f8673fa483813 upstream. We were experiencing a crash similar to the one reported as part of commit:a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()") in our testbed as well. We continue to observe the same crash after integrating the commit a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()") On reviewing the change, the port lock should be taken prior to checking for if (!circ->buf) in fn. __uart_put_char and other fns. that update the buffer uart_state->xmit. Traceback: [11/27/2018 06:24:32.4870] Unable to handle kernel NULL pointer dereference at virtual address 0000003b [11/27/2018 06:24:32.4950] PC is at memcpy+0x48/0x180 [11/27/2018 06:24:32.4950] LR is at uart_write+0x74/0x120 [11/27/2018 06:24:32.4950] pc : [<ffffffc0002e6808>] lr : [<ffffffc0003747cc>] pstate: 000001c5 [11/27/2018 06:24:32.4950] sp : ffffffc076433d30 [11/27/2018 06:24:32.4950] x29: ffffffc076433d30 x28: 0000000000000140 [11/27/2018 06:24:32.4950] x27: ffffffc0009b9d5e x26: ffffffc07ce36580 [11/27/2018 06:24:32.4950] x25: 0000000000000000 x24: 0000000000000140 [11/27/2018 06:24:32.4950] x23: ffffffc000891200 x22: ffffffc01fc34000 [11/27/2018 06:24:32.4950] x21: 0000000000000fff x20: 0000000000000076 [11/27/2018 06:24:32.4950] x19: 0000000000000076 x18: 0000000000000000 [11/27/2018 06:24:32.4950] x17: 000000000047cf08 x16: ffffffc000099e68 [11/27/2018 06:24:32.4950] x15: 0000000000000018 x14: 776d726966205948 [11/27/2018 06:24:32.4950] x13: 50203a6c6974755f x12: 74647075205d3333 [11/27/2018 06:24:32.4950] x11: 3a35323a36203831 x10: 30322f37322f3131 [11/27/2018 06:24:32.4950] x9 : 5b205d303638342e x8 : 746164206f742070 [11/27/2018 06:24:32.4950] x7 : 7520736920657261 x6 : 000000000000003b [11/27/2018 06:24:32.4950] x5 : 000000000000817a x4 : 0000000000000008 [11/27/2018 06:24:32.4950] x3 : 2f37322f31312a5b x2 : 000000000000006e [11/27/2018 06:24:32.4950] x1 : ffffffc0009b9cf0 x0 : 000000000000003b [11/27/2018 06:24:32.4950] CPU2: stopping [11/27/2018 06:24:32.4950] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P D O 4.1.51 #3 [11/27/2018 06:24:32.4950] Hardware name: Broadcom-v8A (DT) [11/27/2018 06:24:32.4950] Call trace: [11/27/2018 06:24:32.4950] [<ffffffc0000883b8>] dump_backtrace+0x0/0x150 [11/27/2018 06:24:32.4950] [<ffffffc00008851c>] show_stack+0x14/0x20 [11/27/2018 06:24:32.4950] [<ffffffc0005ee810>] dump_stack+0x90/0xb0 [11/27/2018 06:24:32.4950] [<ffffffc00008e844>] handle_IPI+0x18c/0x1a0 [11/27/2018 06:24:32.4950] [<ffffffc000080c68>] gic_handle_irq+0x88/0x90 Fixes: a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()") Signed-off-by: Samir Virmani <samir@embedur.com> Acked-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: - Keep open-coding uart_port_lock() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit aff9cf5955185d1f183227e46c5f8673fa483813 upstream.

We were experiencing a crash similar to the one reported as part of
commit:a5ba1d95e46e ("uart: fix race between uart_put_char() and
uart_shutdown()") in our testbed as well. We continue to observe the same
crash after integrating the commit a5ba1d95e46e ("uart: fix race between
uart_put_char() and uart_shutdown()")

On reviewing the change, the port lock should be taken prior to checking for
if (!circ->buf) in fn. __uart_put_char and other fns. that update the buffer
uart_state->xmit.

Traceback:

[11/27/2018 06:24:32.4870] Unable to handle kernel NULL pointer dereference
                           at virtual address 0000003b

[11/27/2018 06:24:32.4950] PC is at memcpy+0x48/0x180
[11/27/2018 06:24:32.4950] LR is at uart_write+0x74/0x120
[11/27/2018 06:24:32.4950] pc : [<ffffffc0002e6808>]
                           lr : [<ffffffc0003747cc>] pstate: 000001c5
[11/27/2018 06:24:32.4950] sp : ffffffc076433d30
[11/27/2018 06:24:32.4950] x29: ffffffc076433d30 x28: 0000000000000140
[11/27/2018 06:24:32.4950] x27: ffffffc0009b9d5e x26: ffffffc07ce36580
[11/27/2018 06:24:32.4950] x25: 0000000000000000 x24: 0000000000000140
[11/27/2018 06:24:32.4950] x23: ffffffc000891200 x22: ffffffc01fc34000
[11/27/2018 06:24:32.4950] x21: 0000000000000fff x20: 0000000000000076
[11/27/2018 06:24:32.4950] x19: 0000000000000076 x18: 0000000000000000
[11/27/2018 06:24:32.4950] x17: 000000000047cf08 x16: ffffffc000099e68
[11/27/2018 06:24:32.4950] x15: 0000000000000018 x14: 776d726966205948
[11/27/2018 06:24:32.4950] x13: 50203a6c6974755f x12: 74647075205d3333
[11/27/2018 06:24:32.4950] x11: 3a35323a36203831 x10: 30322f37322f3131
[11/27/2018 06:24:32.4950] x9 : 5b205d303638342e x8 : 746164206f742070
[11/27/2018 06:24:32.4950] x7 : 7520736920657261 x6 : 000000000000003b
[11/27/2018 06:24:32.4950] x5 : 000000000000817a x4 : 0000000000000008
[11/27/2018 06:24:32.4950] x3 : 2f37322f31312a5b x2 : 000000000000006e
[11/27/2018 06:24:32.4950] x1 : ffffffc0009b9cf0 x0 : 000000000000003b

[11/27/2018 06:24:32.4950] CPU2: stopping
[11/27/2018 06:24:32.4950] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P      D    O    4.1.51 #3
[11/27/2018 06:24:32.4950] Hardware name: Broadcom-v8A (DT)
[11/27/2018 06:24:32.4950] Call trace:
[11/27/2018 06:24:32.4950] [<ffffffc0000883b8>] dump_backtrace+0x0/0x150
[11/27/2018 06:24:32.4950] [<ffffffc00008851c>] show_stack+0x14/0x20
[11/27/2018 06:24:32.4950] [<ffffffc0005ee810>] dump_stack+0x90/0xb0
[11/27/2018 06:24:32.4950] [<ffffffc00008e844>] handle_IPI+0x18c/0x1a0
[11/27/2018 06:24:32.4950] [<ffffffc000080c68>] gic_handle_irq+0x88/0x90

Fixes: a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()")
Signed-off-by: Samir Virmani <samir@embedur.com>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16:
 - Keep open-coding uart_port_lock()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
serial: imx: fix error handling in console_setup 2019-04-04T15:13:45+00:00 Stefan Agner stefan@agner.ch 2018-11-14T17:49:38+00:00 dc7933209440a197bb7780f93778db91dc41c667 commit 63fd4b94b948c14eeb27a3bbf50ea0f7f0593bad upstream. The ipg clock only needs to be unprepared in case preparing per clock fails. The ipg clock has already disabled at the point. Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 63fd4b94b948c14eeb27a3bbf50ea0f7f0593bad upstream.

The ipg clock only needs to be unprepared in case preparing
per clock fails. The ipg clock has already disabled at the point.

Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var() 2019-02-11T17:54:22+00:00 Macpaul Lin macpaul@gmail.com 2018-10-17T15:08:38+00:00 5f5b2d82b89e3671172e64396c36f155fdf60d70 commit dada6a43b0402eba438a17ac86fdc64ac56a4607 upstream. This patch is trying to fix KE issue due to "BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198" reported by Syzkaller scan." [26364:syz-executor0][name:report8t]BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198 [26364:syz-executor0][name:report&]Read of size 1 at addr ffffff900e44f95f by task syz-executor0/26364 [26364:syz-executor0][name:report&] [26364:syz-executor0]CPU: 7 PID: 26364 Comm: syz-executor0 Tainted: G W 0 [26364:syz-executor0]Call trace: [26364:syz-executor0][<ffffff9008095cf8>] dump_bacIctrace+Ox0/0x470 [26364:syz-executor0][<ffffff9008096de0>] show_stack+0x20/0x30 [26364:syz-executor0][<ffffff90089cc9c8>] dump_stack+Oxd8/0x128 [26364:syz-executor0][<ffffff90084edb38>] print_address_description +0x80/0x4a8 [26364:syz-executor0][<ffffff90084ee270>] kasan_report+Ox178/0x390 [26364:syz-executor0][<ffffff90084ee4a0>] _asan_report_loadi_noabort+Ox18/0x20 [26364:syz-executor0][<ffffff9008b092ac>] param_set_kgdboc_var+Ox194/0x198 [26364:syz-executor0][<ffffff900813af64>] param_attr_store+Ox14c/0x270 [26364:syz-executor0][<ffffff90081394c8>] module_attr_store+0x60/0x90 [26364:syz-executor0][<ffffff90086690c0>] sysfs_kl_write+Ox100/0x158 [26364:syz-executor0][<ffffff9008666d84>] kernfs_fop_write+0x27c/0x3a8 [26364:syz-executor0][<ffffff9008508264>] do_loop_readv_writev+0x114/0x1b0 [26364:syz-executor0][<ffffff9008509ac8>] do_readv_writev+0x4f8/0x5e0 [26364:syz-executor0][<ffffff9008509ce4>] vfs_writev+0x7c/Oxb8 [26364:syz-executor0][<ffffff900850ba64>] SyS_writev+Oxcc/0x208 [26364:syz-executor0][<ffffff90080883f0>] elO_svc_naked +0x24/0x28 [26364:syz-executor0][name:report&] [26364:syz-executor0][name:report&]The buggy address belongs to the variable: [26364:syz-executor0][name:report&] kgdb_tty_line+Ox3f/0x40 [26364:syz-executor0][name:report&] [26364:syz-executor0][name:report&]Memory state around the buggy address: [26364:syz-executor0] ffffff900e44f800: 00 00 00 00 00 04 fa fa fa fa fa fa 00 fa fa fa [26364:syz-executor0] ffffff900e44f880: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa [26364:syz-executor0]> ffffff900e44f900: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 [26364:syz-executor0][name:report&] ^ [26364:syz-executor0] ffffff900e44f980: 00 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa [26364:syz-executor0] ffffff900e44fa00: 04 fa fa fa fa fa fa fa 00 fa fa fa fa fa fa fa [26364:syz-executor0][name:report&] [26364:syz-executor0][name:panic&]Disabling lock debugging due to kernel taint [26364:syz-executor0]------------[cut here]------------ After checking the source code, we've found there might be an out-of-bounds access to "config[len - 1]" array when the variable "len" is zero. Signed-off-by: Macpaul Lin <macpaul@gmail.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit dada6a43b0402eba438a17ac86fdc64ac56a4607 upstream.

This patch is trying to fix KE issue due to
"BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198"
reported by Syzkaller scan."

[26364:syz-executor0][name:report8t]BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198
[26364:syz-executor0][name:report&]Read of size 1 at addr ffffff900e44f95f by task syz-executor0/26364
[26364:syz-executor0][name:report&]
[26364:syz-executor0]CPU: 7 PID: 26364 Comm: syz-executor0 Tainted: G W 0
[26364:syz-executor0]Call trace:
[26364:syz-executor0][<ffffff9008095cf8>] dump_bacIctrace+Ox0/0x470
[26364:syz-executor0][<ffffff9008096de0>] show_stack+0x20/0x30
[26364:syz-executor0][<ffffff90089cc9c8>] dump_stack+Oxd8/0x128
[26364:syz-executor0][<ffffff90084edb38>] print_address_description +0x80/0x4a8
[26364:syz-executor0][<ffffff90084ee270>] kasan_report+Ox178/0x390
[26364:syz-executor0][<ffffff90084ee4a0>] _asan_report_loadi_noabort+Ox18/0x20
[26364:syz-executor0][<ffffff9008b092ac>] param_set_kgdboc_var+Ox194/0x198
[26364:syz-executor0][<ffffff900813af64>] param_attr_store+Ox14c/0x270
[26364:syz-executor0][<ffffff90081394c8>] module_attr_store+0x60/0x90
[26364:syz-executor0][<ffffff90086690c0>] sysfs_kl_write+Ox100/0x158
[26364:syz-executor0][<ffffff9008666d84>] kernfs_fop_write+0x27c/0x3a8
[26364:syz-executor0][<ffffff9008508264>] do_loop_readv_writev+0x114/0x1b0
[26364:syz-executor0][<ffffff9008509ac8>] do_readv_writev+0x4f8/0x5e0
[26364:syz-executor0][<ffffff9008509ce4>] vfs_writev+0x7c/Oxb8
[26364:syz-executor0][<ffffff900850ba64>] SyS_writev+Oxcc/0x208
[26364:syz-executor0][<ffffff90080883f0>] elO_svc_naked +0x24/0x28
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]The buggy address belongs to the variable:
[26364:syz-executor0][name:report&] kgdb_tty_line+Ox3f/0x40
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]Memory state around the buggy address:
[26364:syz-executor0] ffffff900e44f800: 00 00 00 00 00 04 fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0] ffffff900e44f880: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0]> ffffff900e44f900: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
[26364:syz-executor0][name:report&]                                       ^
[26364:syz-executor0] ffffff900e44f980: 00 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
[26364:syz-executor0] ffffff900e44fa00: 04 fa fa fa fa fa fa fa 00 fa fa fa fa fa fa fa
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:panic&]Disabling lock debugging due to kernel taint
[26364:syz-executor0]------------[cut here]------------

After checking the source code, we've found there might be an out-of-bounds
access to "config[len - 1]" array when the variable "len" is zero.

Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>