linux-stable.git/drivers/tty/serial, branch v3.16.71

serial: 8250_of: assume reg-shift of 2 for mrvl,mmp-uart

2019-07-09T21:04:08+00:00

commit f4817843e39ce78aace0195a57d4e8500a65a898 upstream.

There are two other drivers that bind to mrvl,mmp-uart and both of them
assume register shift of 2 bits. There are device trees that lack the
property and rely on that assumption.

If this driver wins the race to bind to those devices, it should behave
the same as the older deprecated driver.

Signed-off-by: Lubomir Rintel 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings

serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()

2019-07-09T21:04:01+00:00

commit 78d3820b9bd39028727c6aab7297b63c093db343 upstream.

The four port Pericom chips have the fourth port at the wrong address.
Make use of quirk to fix it.

Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards")
Signed-off-by: Jay Dolan 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: 8250_pci: Fix number of ports for ACCES serial cards

2019-07-09T21:04:01+00:00

commit b896b03bc7fce43a07012cc6bf5e2ab2fddf3364 upstream.

Have the correct number of ports created for ACCES serial cards. Two port
cards show up as four ports, and four port cards show up as eight.

Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards")
Signed-off-by: Jay Dolan 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

uart: Fix crash in uart_write and uart_put_char

2019-05-02T20:41:25+00:00

commit aff9cf5955185d1f183227e46c5f8673fa483813 upstream.

We were experiencing a crash similar to the one reported as part of
commit:a5ba1d95e46e ("uart: fix race between uart_put_char() and
uart_shutdown()") in our testbed as well. We continue to observe the same
crash after integrating the commit a5ba1d95e46e ("uart: fix race between
uart_put_char() and uart_shutdown()")

On reviewing the change, the port lock should be taken prior to checking for
if (!circ->buf) in fn. __uart_put_char and other fns. that update the buffer
uart_state->xmit.

Traceback:

[11/27/2018 06:24:32.4870] Unable to handle kernel NULL pointer dereference
                           at virtual address 0000003b

[11/27/2018 06:24:32.4950] PC is at memcpy+0x48/0x180
[11/27/2018 06:24:32.4950] LR is at uart_write+0x74/0x120
[11/27/2018 06:24:32.4950] pc : []
                           lr : [] pstate: 000001c5
[11/27/2018 06:24:32.4950] sp : ffffffc076433d30
[11/27/2018 06:24:32.4950] x29: ffffffc076433d30 x28: 0000000000000140
[11/27/2018 06:24:32.4950] x27: ffffffc0009b9d5e x26: ffffffc07ce36580
[11/27/2018 06:24:32.4950] x25: 0000000000000000 x24: 0000000000000140
[11/27/2018 06:24:32.4950] x23: ffffffc000891200 x22: ffffffc01fc34000
[11/27/2018 06:24:32.4950] x21: 0000000000000fff x20: 0000000000000076
[11/27/2018 06:24:32.4950] x19: 0000000000000076 x18: 0000000000000000
[11/27/2018 06:24:32.4950] x17: 000000000047cf08 x16: ffffffc000099e68
[11/27/2018 06:24:32.4950] x15: 0000000000000018 x14: 776d726966205948
[11/27/2018 06:24:32.4950] x13: 50203a6c6974755f x12: 74647075205d3333
[11/27/2018 06:24:32.4950] x11: 3a35323a36203831 x10: 30322f37322f3131
[11/27/2018 06:24:32.4950] x9 : 5b205d303638342e x8 : 746164206f742070
[11/27/2018 06:24:32.4950] x7 : 7520736920657261 x6 : 000000000000003b
[11/27/2018 06:24:32.4950] x5 : 000000000000817a x4 : 0000000000000008
[11/27/2018 06:24:32.4950] x3 : 2f37322f31312a5b x2 : 000000000000006e
[11/27/2018 06:24:32.4950] x1 : ffffffc0009b9cf0 x0 : 000000000000003b

[11/27/2018 06:24:32.4950] CPU2: stopping
[11/27/2018 06:24:32.4950] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P      D    O    4.1.51 #3
[11/27/2018 06:24:32.4950] Hardware name: Broadcom-v8A (DT)
[11/27/2018 06:24:32.4950] Call trace:
[11/27/2018 06:24:32.4950] [] dump_backtrace+0x0/0x150
[11/27/2018 06:24:32.4950] [] show_stack+0x14/0x20
[11/27/2018 06:24:32.4950] [] dump_stack+0x90/0xb0
[11/27/2018 06:24:32.4950] [] handle_IPI+0x18c/0x1a0
[11/27/2018 06:24:32.4950] [] gic_handle_irq+0x88/0x90

Fixes: a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()")
Signed-off-by: Samir Virmani 
Acked-by: Tycho Andersen 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.16:
 - Keep open-coding uart_port_lock()
 - Adjust context]
Signed-off-by: Ben Hutchings

serial: imx: fix error handling in console_setup

2019-04-04T15:13:45+00:00

commit 63fd4b94b948c14eeb27a3bbf50ea0f7f0593bad upstream.

The ipg clock only needs to be unprepared in case preparing
per clock fails. The ipg clock has already disabled at the point.

Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check")
Signed-off-by: Stefan Agner 
Reviewed-by: Uwe Kleine-König 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()

2019-02-11T17:54:22+00:00

commit dada6a43b0402eba438a17ac86fdc64ac56a4607 upstream.

This patch is trying to fix KE issue due to
"BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198"
reported by Syzkaller scan."

[26364:syz-executor0][name:report8t]BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198
[26364:syz-executor0][name:report&]Read of size 1 at addr ffffff900e44f95f by task syz-executor0/26364
[26364:syz-executor0][name:report&]
[26364:syz-executor0]CPU: 7 PID: 26364 Comm: syz-executor0 Tainted: G W 0
[26364:syz-executor0]Call trace:
[26364:syz-executor0][] dump_bacIctrace+Ox0/0x470
[26364:syz-executor0][] show_stack+0x20/0x30
[26364:syz-executor0][] dump_stack+Oxd8/0x128
[26364:syz-executor0][] print_address_description +0x80/0x4a8
[26364:syz-executor0][] kasan_report+Ox178/0x390
[26364:syz-executor0][] _asan_report_loadi_noabort+Ox18/0x20
[26364:syz-executor0][] param_set_kgdboc_var+Ox194/0x198
[26364:syz-executor0][] param_attr_store+Ox14c/0x270
[26364:syz-executor0][] module_attr_store+0x60/0x90
[26364:syz-executor0][] sysfs_kl_write+Ox100/0x158
[26364:syz-executor0][] kernfs_fop_write+0x27c/0x3a8
[26364:syz-executor0][] do_loop_readv_writev+0x114/0x1b0
[26364:syz-executor0][] do_readv_writev+0x4f8/0x5e0
[26364:syz-executor0][] vfs_writev+0x7c/Oxb8
[26364:syz-executor0][] SyS_writev+Oxcc/0x208
[26364:syz-executor0][] elO_svc_naked +0x24/0x28
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]The buggy address belongs to the variable:
[26364:syz-executor0][name:report&] kgdb_tty_line+Ox3f/0x40
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]Memory state around the buggy address:
[26364:syz-executor0] ffffff900e44f800: 00 00 00 00 00 04 fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0] ffffff900e44f880: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0]> ffffff900e44f900: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
[26364:syz-executor0][name:report&]                                       ^
[26364:syz-executor0] ffffff900e44f980: 00 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
[26364:syz-executor0] ffffff900e44fa00: 04 fa fa fa fa fa fa fa 00 fa fa fa fa fa fa fa
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:panic&]Disabling lock debugging due to kernel taint
[26364:syz-executor0]------------[cut here]------------

After checking the source code, we've found there might be an out-of-bounds
access to "config[len - 1]" array when the variable "len" is zero.

Signed-off-by: Macpaul Lin 
Acked-by: Daniel Thompson 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

kgdboc: Passing ekgdboc to command line causes panic

2019-02-11T17:53:21+00:00

commit 1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream.

kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.

PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1
[    0.000000] RIP: 0010:strlen+0x0/0x20
...
[    0.000000] Call Trace
[    0.000000]  ? kgdboc_option_setup+0x9/0xa0
[    0.000000]  ? kgdboc_early_init+0x6/0x1b
[    0.000000]  ? do_early_param+0x4d/0x82
[    0.000000]  ? parse_args+0x212/0x330
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_options+0x20/0x23
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_param+0x2d/0x39
[    0.000000]  ? setup_arch+0x2f7/0xbf4
[    0.000000]  ? start_kernel+0x5e/0x4c2
[    0.000000]  ? load_ucode_bsp+0x113/0x12f
[    0.000000]  ? secondary_startup_64+0xa5/0xb0

This patch adds a check to prevent the panic.

Cc: jason.wessel@windriver.com
Cc: gregkh@linuxfoundation.org
Cc: jslaby@suse.com
Signed-off-by: He Zhe 
Reviewed-by: Daniel Thompson 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: cpm_uart: return immediately from console poll

2018-12-16T22:09:20+00:00

commit be28c1e3ca29887e207f0cbcd294cefe5074bab6 upstream.

kgdb expects poll function to return immediately and
returning NO_POLL_CHAR when no character is available.

Fixes: f5316b4aea024 ("kgdb,8250,pl011: Return immediately from console poll")
Cc: Jason Wessel 
Signed-off-by: Christophe Leroy 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

uart: fix race between uart_put_char() and uart_shutdown()

2018-12-16T22:08:14+00:00

commit a5ba1d95e46ecaea638ddd7cd144107c783acb5d upstream.

We have reports of the following crash:

    PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0"
    #0 [ffff88085c6db710] machine_kexec at ffffffff81046239
    #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248
    #2 [ffff88085c6db830] oops_end at ffffffff81008ae7
    #3 [ffff88085c6db860] no_context at ffffffff81050b8f
    #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75
    #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83
    #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e
    #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c
    #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122
    [exception RIP: uart_put_char+149]
    RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006
    RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081
    RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120
    RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320
    R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000
    R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba
    ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
    #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544
    #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c
    #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b
    #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2
    #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b
    #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a
    #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016
    #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194
    #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a
    #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2
    #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d
    #20 [ffff88085c6dbeb0] kthread at ffffffff81096384
    #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f

after slogging through some dissasembly:

ffffffff814b6720 :
ffffffff814b6720:	55                   	push   %rbp
ffffffff814b6721:	48 89 e5             	mov    %rsp,%rbp
ffffffff814b6724:	48 83 ec 20          	sub    $0x20,%rsp
ffffffff814b6728:	48 89 1c 24          	mov    %rbx,(%rsp)
ffffffff814b672c:	4c 89 64 24 08       	mov    %r12,0x8(%rsp)
ffffffff814b6731:	4c 89 6c 24 10       	mov    %r13,0x10(%rsp)
ffffffff814b6736:	4c 89 74 24 18       	mov    %r14,0x18(%rsp)
ffffffff814b673b:	e8 b0 8e 58 00       	callq  ffffffff81a3f5f0 
ffffffff814b6740:	4c 8b a7 88 02 00 00 	mov    0x288(%rdi),%r12
ffffffff814b6747:	45 31 ed             	xor    %r13d,%r13d
ffffffff814b674a:	41 89 f6             	mov    %esi,%r14d
ffffffff814b674d:	49 83 bc 24 70 01 00 	cmpq   $0x0,0x170(%r12)
ffffffff814b6754:	00 00
ffffffff814b6756:	49 8b 9c 24 80 01 00 	mov    0x180(%r12),%rbx
ffffffff814b675d:	00
ffffffff814b675e:	74 2f                	je     ffffffff814b678f 
ffffffff814b6760:	48 89 df             	mov    %rbx,%rdi
ffffffff814b6763:	e8 a8 67 58 00       	callq  ffffffff81a3cf10 <_raw_spin_lock_irqsave>
ffffffff814b6768:	41 8b 8c 24 78 01 00 	mov    0x178(%r12),%ecx
ffffffff814b676f:	00
ffffffff814b6770:	89 ca                	mov    %ecx,%edx
ffffffff814b6772:	f7 d2                	not    %edx
ffffffff814b6774:	41 03 94 24 7c 01 00 	add    0x17c(%r12),%edx
ffffffff814b677b:	00
ffffffff814b677c:	81 e2 ff 0f 00 00    	and    $0xfff,%edx
ffffffff814b6782:	75 23                	jne    ffffffff814b67a7 
ffffffff814b6784:	48 89 c6             	mov    %rax,%rsi
ffffffff814b6787:	48 89 df             	mov    %rbx,%rdi
ffffffff814b678a:	e8 e1 64 58 00       	callq  ffffffff81a3cc70 <_raw_spin_unlock_irqrestore>
ffffffff814b678f:	44 89 e8             	mov    %r13d,%eax
ffffffff814b6792:	48 8b 1c 24          	mov    (%rsp),%rbx
ffffffff814b6796:	4c 8b 64 24 08       	mov    0x8(%rsp),%r12
ffffffff814b679b:	4c 8b 6c 24 10       	mov    0x10(%rsp),%r13
ffffffff814b67a0:	4c 8b 74 24 18       	mov    0x18(%rsp),%r14
ffffffff814b67a5:	c9                   	leaveq
ffffffff814b67a6:	c3                   	retq
ffffffff814b67a7:	49 8b 94 24 70 01 00 	mov    0x170(%r12),%rdx
ffffffff814b67ae:	00
ffffffff814b67af:	48 63 c9             	movslq %ecx,%rcx
ffffffff814b67b2:	41 b5 01             	mov    $0x1,%r13b
ffffffff814b67b5:	44 88 34 0a          	mov    %r14b,(%rdx,%rcx,1)
ffffffff814b67b9:	41 8b 94 24 78 01 00 	mov    0x178(%r12),%edx
ffffffff814b67c0:	00
ffffffff814b67c1:	83 c2 01             	add    $0x1,%edx
ffffffff814b67c4:	81 e2 ff 0f 00 00    	and    $0xfff,%edx
ffffffff814b67ca:	41 89 94 24 78 01 00 	mov    %edx,0x178(%r12)
ffffffff814b67d1:	00
ffffffff814b67d2:	eb b0                	jmp    ffffffff814b6784 
ffffffff814b67d4:	66 66 66 2e 0f 1f 84 	data32 data32 nopw %cs:0x0(%rax,%rax,1)
ffffffff814b67db:	00 00 00 00 00

for our build, this is crashing at:

    circ->buf[circ->head] = c;

Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf)
protected by the "per-port mutex", which based on uart_port_check() is
state->port.mutex. Indeed, the lock acquired in uart_put_char() is
uport->lock, i.e. not the same lock.

Anyway, since the lock is not acquired, if uart_shutdown() is called, the
last chunk of that function may release state->xmit.buf before its assigned
to null, and cause the race above.

To fix it, let's lock uport->lock when allocating/deallocating
state->xmit.buf in addition to the per-port mutex.

v2: switch to locking uport->lock on allocation/deallocation instead of
    locking the per-port mutex in uart_put_char. Note that since
    uport->lock is a spin lock, we have to switch the allocation to
    GFP_ATOMIC.
v3: move the allocation outside the lock, so we can switch back to
    GFP_KERNEL

Signed-off-by: Tycho Andersen 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.16: Use uport->lock directly rather than through
 uart_port_{,un}lock()]
Signed-off-by: Ben Hutchings

serial: pxa: Fix an error handling path in 'serial_pxa_probe()'

2018-12-16T22:08:06+00:00

commit 95a0e656580fab3128c7bee5f660c50784f53651 upstream.

If port.line is out of range, we still need to release some resources, or
we will leak them.

Fixes: afc7851fab83 ("serial: pxa: Fix out-of-bounds access through serial port index")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings