linux-stable.git/drivers/tty/serial, branch v3.16.52

serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

2017-10-12T14:28:17+00:00

commit b8995f527aac143e83d3900ff39357651ea4e0f6 upstream.

This patch fixes the broken serial log when changing the clock source
of uart device. Before disabling the original clock source, this patch
enables the new clock source to protect the clock off state for a split second.

Signed-off-by: Chanwoo Choi 
Reviewed-by: Marek Szyprowski 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

Fix serial console on SNI RM400 machines

2017-10-12T14:27:44+00:00

commit e279e6d98e0cf2c2fe008b3c29042b92f0e17b1d upstream.

sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK
is disabled. Correct usage of clk API to make it work with/without it.

Fixes: 90efa75f7ab0 (serial: sccnxp: Using CLK API for getting UART clock)

Suggested-by: Russell King - ARM Linux 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: ifx6x60: fix use-after-free on module unload

2017-09-15T17:29:45+00:00

commit 1e948479b3d63e3ac0ecca13cbf4921c7d17c168 upstream.

Make sure to deregister the SPI driver before releasing the tty driver
to avoid use-after-free in the SPI remove callback where the tty
devices are deregistered.

Fixes: 72d4724ea54c ("serial: ifx6x60: Add modem power off function in the platform reboot process")
Cc: Jun Chen 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: ifx6x60: Remove dangerous spi_driver casts

2017-09-15T17:29:45+00:00

commit 9a499db0325b8a8e2368f21fef66705b120f38ba upstream.

Casting spi_driver pointers to "void *" when calling
spi_{,un}register_driver() bypasses all type checking.

Remove the superfluous casts to fix this.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'

2017-09-15T17:29:45+00:00

commit be40597a1bc173bf9dadccdf5388b956f620ae8f upstream.

UARTn_FRAME_PARITY_ODD is 0x0300
UARTn_FRAME_PARITY_EVEN is 0x0200
So if the UART is configured for EVEN parity, it would be reported as ODD.
Fix it by correctly testing if the 2 bits are set.

Fixes: 3afbd89c9639 ("serial/efm32: add new driver")
Signed-off-by: Christophe JAILLET 
Acked-by: Uwe Kleine-König 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: omap: suspend device on probe errors

2017-08-26T01:14:31+00:00

commit 77e6fe7fd2b7cba0bf2f2dc8cde51d7b9a35bf74 upstream.

Make sure to actually suspend the device before returning after a failed
(or deferred) probe.

Note that autosuspend must be disabled before runtime pm is disabled in
order to balance the usage count due to a negative autosuspend delay as
well as to make the final put suspend the device synchronously.

Fixes: 388bc2622680 ("omap-serial: Fix the error handling in the omap_serial probe")
Cc: Shubhrajyoti D 
Signed-off-by: Johan Hovold 
Acked-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: omap: fix runtime-pm handling on unbind

2017-08-26T01:14:31+00:00

commit 099bd73dc17ed77aa8c98323e043613b6e8f54fc upstream.

An unbalanced and misplaced synchronous put was used to suspend the
device on driver unbind, something which with a likewise misplaced
pm_runtime_disable leads to external aborts when an open port is being
removed.

Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010
...
[] (serial_omap_set_mctrl) from [] (uart_update_mctrl+0x50/0x60)
[] (uart_update_mctrl) from [] (uart_shutdown+0xbc/0x138)
[] (uart_shutdown) from [] (uart_hangup+0x94/0x190)
[] (uart_hangup) from [] (__tty_hangup+0x404/0x41c)
[] (__tty_hangup) from [] (tty_vhangup+0x1c/0x20)
[] (tty_vhangup) from [] (uart_remove_one_port+0xec/0x260)
[] (uart_remove_one_port) from [] (serial_omap_remove+0x40/0x60)
[] (serial_omap_remove) from [] (platform_drv_remove+0x34/0x4c)

Fix this up by resuming the device before deregistering the port and by
suspending and disabling runtime pm only after the port has been
removed.

Also make sure to disable autosuspend before disabling runtime pm so
that the usage count is balanced and device actually suspended before
returning.

Note that due to a negative autosuspend delay being set in probe, the
unbalanced put would actually suspend the device on first driver unbind,
while rebinding and again unbinding would result in a negative
power.usage_count.

Fixes: 7e9c8e7dbf3b ("serial: omap: make sure to suspend device before remove")
Cc: Felipe Balbi 
Cc: Santosh Shilimkar 
Signed-off-by: Johan Hovold 
Acked-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: sh-sci: Fix panic when serial console and DMA are enabled

2017-08-26T01:14:24+00:00

commit 3c9101766b502a0163d1d437fada5801cf616be2 upstream.

This patch fixes an issue that kernel panic happens when DMA is enabled
and we press enter key while the kernel booting on the serial console.

* An interrupt may occur after sci_request_irq().
* DMA transfer area is initialized by setup_timer() in sci_request_dma()
  and used in interrupt.

If an interrupt occurred between sci_request_irq() and setup_timer() in
sci_request_dma(), DMA transfer area has not been initialized yet.
So, this patch changes the order of sci_request_irq() and
sci_request_dma().

Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Signed-off-by: Takatoshi Akiyama 
[Shimoda changes the commit log]
Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: mxs-auart: Fix baudrate calculation

2017-07-18T17:40:27+00:00

commit a6040bc610554c66088fda3608ae5d6307c548e4 upstream.

The reference manual for the i.MX28 recommends to calculate the divisor
as

	divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer

, so let's do this. For a typical setup of UARTCLK = 24 MHz and baud
rate = 115200 this changes the divisor from 6666 to 6667 and so the
actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to
115194.240 Bd (error ≅ 0.005 %).

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.16: adjust context, indentation]
Signed-off-by: Ben Hutchings

serial: mxs-auart: fix baud rate range

2017-07-18T17:40:27+00:00

commit df57cf6a879502cd6e5559c1f2d6db12128e074f upstream.

Currently mxs-auart doesn't care correctly about the baud rate divisor.
According to reference manual the baud rate divisor must be between
0x000000EC and 0x003FFFC0. So calculate the possible baud rate range
and use it for uart_get_baud_rate().

Signed-off-by: Stefan Wahren 
Reviewed-by: Fabio Estevam 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings