linux-stable.git/drivers/tty/serial, branch v3.10.97

serial: 8250: don't bind to SMSC IrCC IR port

2015-09-21T17:00:08+00:00

commit ffa34de03bcfbfa88d8352942bc238bb48e94e2d upstream.

SMSC IrCC SIR/FIR port should not be bound to by
(legacy) serial driver so its own driver (smsc-ircc2)
can bind to it.

Signed-off-by: Maciej Szmigiero 
Signed-off-by: Greg Kroah-Hartman

serial: of-serial: Remove device_type = "serial" registration

2015-05-13T12:15:41+00:00

commit 6befa9d883385c580369a2cc9e53fbf329771f6d upstream.

Do not probe all serial drivers by of_serial.c which are using
device_type = "serial"; property. Only drivers which have valid
compatible strings listed in the driver should be probed.

When PORT_UNKNOWN is setup probe will fail anyway.

Arnd quotation about driver historical background:
"when I wrote that driver initially, the idea was that it would
get used as a stub to hook up all other serial drivers but after
that, the common code learned to create platform devices from DT"

This patch fix the problem with on the system with xilinx_uartps and
16550a where of_serial failed to register for xilinx_uartps and because
of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking
for irq with request_irq() EINVAL is returned.

Signed-off-by: Michal Simek 
Acked-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Fix deadlock in LCR workaround

2015-04-29T08:33:57+00:00

commit 7fd6f640f2dd17dac6ddd6702c378cb0bb9cfa11 upstream.

Trying to write console output from within the serial console driver
while the port->lock is held causes recursive deadlock:

  CPU 0
spin_lock_irqsave(&port->lock)
printk()
  console_unlock()
    call_console_drivers()
      serial8250_console_write()
        spin_lock_irqsave(&port->lock)
** DEADLOCK **

The 8250_dw i/o accessors try to write a console error message if the
LCR workaround was unsuccessful. When the port->lock is already held
(eg., when called from serial8250_set_termios()), this deadlocks.

Make the error message a FIXME until a general solution is devised.

Cc: Tim Kryger 
Reported-by: Zhang Zhen 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

Change email address for 8250_pci

2015-03-26T14:00:58+00:00

commit f2e0ea861117bda073d1d7ffbd3120c07c0d5d34 upstream.

I'm still receiving reports to my email address, so let's point this
at the linux-serial mailing list instead.

Signed-off-by: Russell King 
Signed-off-by: Greg Kroah-Hartman

serial: samsung: wait for transfer completion before clock disable

2015-01-16T14:59:02+00:00

commit 1ff383a4c3eda8893ec61b02831826e1b1f46b41 upstream.

This patch adds waiting until transmit buffer and shifter will be empty
before clock disabling.

Without this fix it's possible to have clock disabled while data was
not transmited yet, which causes unproper state of TX line and problems
in following data transfers.

Signed-off-by: Robert Baldyga 
Signed-off-by: Greg Kroah-Hartman

serial: Fix divide-by-zero fault in uart_get_divisor()

2014-11-14T16:47:58+00:00

commit 547039ec502076e60034eeb79611df3433a99b7d upstream.

uart_get_baud_rate() will return baud == 0 if the max rate is set
to the "magic" 38400 rate and the SPD_* flags are also specified.
On the first iteration, if the current baud rate is higher than the
max, the baud rate is clamped at the max (which in the degenerate
case is 38400). On the second iteration, the now-"magic" 38400 baud
rate selects the possibly higher alternate baud rate indicated by
the SPD_* flag. Since only two loop iterations are performed, the
loop is exited, a kernel WARNING is generated and a baud rate of
0 is returned.

Reproducible with:
 setserial /dev/ttyS0 spd_hi base_baud 38400

Only perform the "magic" 38400 -> SPD_* baud transform on the first
loop iteration, which prevents the degenerate case from recognizing
the clamped baud rate as the "magic" 38400 value.

Reported-by: Robert Święcki 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dma: check the result of TX buffer mapping

2014-10-05T21:54:15+00:00

commit d4089a332883ad969700aac5dd4dd5f1c4fee825 upstream.

Using dma_mapping_error() to make sure the mapping did not
fail.

Signed-off-by: Heikki Krogerus 
Cc: "Petallo, MauriceX R" 
Signed-off-by: Greg Kroah-Hartman

serial: core: Preserve termios c_cflag for console resume

2014-09-05T23:28:35+00:00

commit ae84db9661cafc63d179e1d985a2c5b841ff0ac4 upstream.

When a tty is opened for the serial console, the termios c_cflag
settings are inherited from the console line settings.
However, if the tty is subsequently closed, the termios settings
are lost. This results in a garbled console if the console is later
suspended and resumed.

Preserve the termios c_cflag for the serial console when the tty
is shutdown; this reflects the most recent line settings.

Fixes: Bugzilla #69751, 'serial console does not wake from S3'
Reported-by: Valerio Vanni 
Acked-by: Alan Cox 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

sunsab: Fix detection of BREAK on sunsab serial console

2014-08-14T01:24:16+00:00

[ Upstream commit fe418231b195c205701c0cc550a03f6c9758fd9e ]

Fix detection of BREAK on sunsab serial console: BREAK detection was only
performed when there were also serial characters received simultaneously.
To handle all BREAKs correctly, the check for BREAK and the corresponding
call to uart_handle_break() must also be done if count == 0, therefore
duplicate this code fragment and pull it out of the loop over the received
characters.

Patch applies to 3.16-rc6.

Signed-off-by: Christopher Alexander Tobias Schulze 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Fix LCR workaround regression

2014-07-09T18:14:02+00:00

commit 6979f8d28049879e6147767d93ba6732c8bd94f4 upstream.

Commit c49436b657d0 (serial: 8250_dw: Improve unwritable LCR workaround)
caused a regression. It added a check that the LCR was written properly
to detect and workaround the busy quirk, but the behaviour of bit 5
(UART_LCR_SPAR) differs between IP versions 3.00a and 3.14c per the
docs. On older versions this caused the check to fail and it would
repeatedly force idle and rewrite the LCR register, causing delays and
preventing any input from serial being received.

This is fixed by masking out UART_LCR_SPAR before making the comparison.

Signed-off-by: James Hogan 
Cc: Greg Kroah-Hartman 
Cc: Jiri Slaby 
Cc: Tim Kryger 
Cc: Ezequiel Garcia 
Cc: Matt Porter 
Cc: Markus Mayer 
Tested-by: Tim Kryger 
Tested-by: Ezequiel Garcia 
Tested-by: Heikki Krogerus 
Cc: Wang Nan 
Signed-off-by: Greg Kroah-Hartman