linux-stable.git/drivers/tty/serial, branch linux-4.18.y Linux kernel stable tree serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout 2018-11-21T08:21:59+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2018-10-30T06:13:35+00:00 c1d44176f2c3a9b97f8da17ace4534c56657f77a commit 641a41dbba217ee5bd26abe6be77f8cead9cd00e upstream. This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 641a41dbba217ee5bd26abe6be77f8cead9cd00e upstream.

This patch fixes an issue that the sci_remove() could not remove
dev_attr_rx_fifo_timeout because uart_remove_one_port() set
the port->port.type to PORT_UNKNOWN.

Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sc16is7xx: Fix for multi-channel stall 2018-11-21T08:21:58+00:00 Phil Elwell phil@raspberrypi.org 2018-09-12T14:31:55+00:00 2139f23fd23345ef079484a97fa4cf3144b1c3cc [ Upstream commit 8344498721059754e09d30fe255a12dab8fb03ef ] The SC16IS752 is a dual-channel device. The two channels are largely independent, but the IRQ signals are wired together as an open-drain, active low signal which will be driven low while either of the channels requires attention, which can be for significant periods of time until operations complete and the interrupt can be acknowledged. In that respect it is should be treated as a true level-sensitive IRQ. The kernel, however, needs to be able to exit interrupt context in order to use I2C or SPI to access the device registers (which may involve sleeping). Therefore the interrupt needs to be masked out or paused in some way. The usual way to manage sleeping from within an interrupt handler is to use a threaded interrupt handler - a regular interrupt routine does the minimum amount of work needed to triage the interrupt before waking the interrupt service thread. If the threaded IRQ is marked as IRQF_ONESHOT the kernel will automatically mask out the interrupt until the thread runs to completion. The sc16is7xx driver used to use a threaded IRQ, but a patch switched to using a kthread_worker in order to set realtime priorities on the handler thread and for other optimisations. The end result is non-threaded IRQ that schedules some work then returns IRQ_HANDLED, making the kernel think that all IRQ processing has completed. The work-around to prevent a constant stream of interrupts is to mark the interrupt as edge-sensitive rather than level-sensitive, but interpreting an active-low source as a falling-edge source requires care to prevent a total cessation of interrupts. Whereas an edge-triggering source will generate a new edge for every interrupt condition a level-triggering source will keep the signal at the interrupting level until it no longer requires attention; in other words, the host won't see another edge until all interrupt conditions are cleared. It is therefore vital that the interrupt handler does not exit with an outstanding interrupt condition, otherwise the kernel will not receive another interrupt unless some other operation causes the interrupt state on the device to be cleared. The existing sc16is7xx driver has a very simple interrupt "thread" (kthread_work job) that processes interrupts on each channel in turn until there are no more. If both channels are active and the first channel starts interrupting while the handler for the second channel is running then it will not be detected and an IRQ stall ensues. This could be handled easily if there was a shared IRQ status register, or a convenient way to determine if the IRQ had been deasserted for any length of time, but both appear to be lacking. Avoid this problem (or at least make it much less likely to happen) by reducing the granularity of per-channel interrupt processing to one condition per iteration, only exiting the overall loop when both channels are no longer interrupting. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 8344498721059754e09d30fe255a12dab8fb03ef ]

The SC16IS752 is a dual-channel device. The two channels are largely
independent, but the IRQ signals are wired together as an open-drain,
active low signal which will be driven low while either of the
channels requires attention, which can be for significant periods of
time until operations complete and the interrupt can be acknowledged.
In that respect it is should be treated as a true level-sensitive IRQ.

The kernel, however, needs to be able to exit interrupt context in
order to use I2C or SPI to access the device registers (which may
involve sleeping).  Therefore the interrupt needs to be masked out or
paused in some way.

The usual way to manage sleeping from within an interrupt handler
is to use a threaded interrupt handler - a regular interrupt routine
does the minimum amount of work needed to triage the interrupt before
waking the interrupt service thread. If the threaded IRQ is marked as
IRQF_ONESHOT the kernel will automatically mask out the interrupt
until the thread runs to completion. The sc16is7xx driver used to
use a threaded IRQ, but a patch switched to using a kthread_worker
in order to set realtime priorities on the handler thread and for
other optimisations. The end result is non-threaded IRQ that
schedules some work then returns IRQ_HANDLED, making the kernel
think that all IRQ processing has completed.

The work-around to prevent a constant stream of interrupts is to
mark the interrupt as edge-sensitive rather than level-sensitive,
but interpreting an active-low source as a falling-edge source
requires care to prevent a total cessation of interrupts. Whereas
an edge-triggering source will generate a new edge for every interrupt
condition a level-triggering source will keep the signal at the
interrupting level until it no longer requires attention; in other
words, the host won't see another edge until all interrupt conditions
are cleared. It is therefore vital that the interrupt handler does not
exit with an outstanding interrupt condition, otherwise the kernel
will not receive another interrupt unless some other operation causes
the interrupt state on the device to be cleared.

The existing sc16is7xx driver has a very simple interrupt "thread"
(kthread_work job) that processes interrupts on each channel in turn
until there are no more. If both channels are active and the first
channel starts interrupting while the handler for the second channel
is running then it will not be detected and an IRQ stall ensues. This
could be handled easily if there was a shared IRQ status register, or
a convenient way to determine if the IRQ had been deasserted for any
length of time, but both appear to be lacking.

Avoid this problem (or at least make it much less likely to happen)
by reducing the granularity of per-channel interrupt processing
to one condition per iteration, only exiting the overall loop when
both channels are no longer interrupting.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kgdboc: Passing ekgdboc to command line causes panic 2018-11-13T19:12:49+00:00 He Zhe zhe.he@windriver.com 2018-08-17T14:42:28+00:00 239efda32abd24c270a0348f678cb3a99223189b commit 1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream. kgdboc_option_setup does not check input argument before passing it to strlen. The argument would be a NULL pointer if "ekgdboc", without its value, is set in command line and thus cause the following panic. PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1 [ 0.000000] RIP: 0010:strlen+0x0/0x20 ... [ 0.000000] Call Trace [ 0.000000] ? kgdboc_option_setup+0x9/0xa0 [ 0.000000] ? kgdboc_early_init+0x6/0x1b [ 0.000000] ? do_early_param+0x4d/0x82 [ 0.000000] ? parse_args+0x212/0x330 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_options+0x20/0x23 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_param+0x2d/0x39 [ 0.000000] ? setup_arch+0x2f7/0xbf4 [ 0.000000] ? start_kernel+0x5e/0x4c2 [ 0.000000] ? load_ucode_bsp+0x113/0x12f [ 0.000000] ? secondary_startup_64+0xa5/0xb0 This patch adds a check to prevent the panic. Cc: stable@vger.kernel.org Cc: jason.wessel@windriver.com Cc: gregkh@linuxfoundation.org Cc: jslaby@suse.com Signed-off-by: He Zhe <zhe.he@windriver.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream.

kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.

PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1
[    0.000000] RIP: 0010:strlen+0x0/0x20
...
[    0.000000] Call Trace
[    0.000000]  ? kgdboc_option_setup+0x9/0xa0
[    0.000000]  ? kgdboc_early_init+0x6/0x1b
[    0.000000]  ? do_early_param+0x4d/0x82
[    0.000000]  ? parse_args+0x212/0x330
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_options+0x20/0x23
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_param+0x2d/0x39
[    0.000000]  ? setup_arch+0x2f7/0xbf4
[    0.000000]  ? start_kernel+0x5e/0x4c2
[    0.000000]  ? load_ucode_bsp+0x113/0x12f
[    0.000000]  ? secondary_startup_64+0xa5/0xb0

This patch adds a check to prevent the panic.

Cc: stable@vger.kernel.org
Cc: jason.wessel@windriver.com
Cc: gregkh@linuxfoundation.org
Cc: jslaby@suse.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "serial: 8250_dw: Fix runtime PM handling" 2018-11-04T13:51:47+00:00 Guenter Roeck linux@roeck-us.net 2018-10-02T04:42:37+00:00 1ac18a1dbc3f2f1fa67d57db57d85308cbd8680c [ Upstream commit beeeac43b6fae5f5eaf707b6fcc2bf1e09deb785 ] This reverts commit d76c74387e1c978b6c5524a146ab0f3f72206f98. While commit d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling") fixes runtime PM handling when using kgdb, it introduces a traceback for everyone else. BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/next/drivers/base/power/runtime.c:1034 in_atomic(): 1, irqs_disabled(): 1, pid: 1, name: swapper/0 7 locks held by swapper/0/1: #0: 000000005ec5bc72 (&dev->mutex){....}, at: __driver_attach+0xb5/0x12b #1: 000000005d5fa9e5 (&dev->mutex){....}, at: __device_attach+0x3e/0x15b #2: 0000000047e93286 (serial_mutex){+.+.}, at: serial8250_register_8250_port+0x51/0x8bb #3: 000000003b328f07 (port_mutex){+.+.}, at: uart_add_one_port+0xab/0x8b0 #4: 00000000fa313d4d (&port->mutex){+.+.}, at: uart_add_one_port+0xcc/0x8b0 #5: 00000000090983ca (console_lock){+.+.}, at: vprintk_emit+0xdb/0x217 #6: 00000000c743e583 (console_owner){-...}, at: console_unlock+0x211/0x60f irq event stamp: 735222 __down_trylock_console_sem+0x4a/0x84 console_unlock+0x338/0x60f __do_softirq+0x4a4/0x50d irq_exit+0x64/0xe2 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5 #6 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.286.0 03/15/2017 Call Trace: dump_stack+0x7d/0xbd ___might_sleep+0x238/0x259 __pm_runtime_resume+0x4e/0xa4 ? serial8250_rpm_get+0x2e/0x44 serial8250_console_write+0x44/0x301 ? lock_acquire+0x1b8/0x1fa console_unlock+0x577/0x60f vprintk_emit+0x1f0/0x217 printk+0x52/0x6e register_console+0x43b/0x524 uart_add_one_port+0x672/0x8b0 ? set_io_from_upio+0x150/0x162 serial8250_register_8250_port+0x825/0x8bb dw8250_probe+0x80c/0x8b0 ? dw8250_serial_inq+0x8e/0x8e ? dw8250_check_lcr+0x108/0x108 ? dw8250_runtime_resume+0x5b/0x5b ? dw8250_serial_outq+0xa1/0xa1 ? dw8250_remove+0x115/0x115 platform_drv_probe+0x76/0xc5 really_probe+0x1f1/0x3ee ? driver_allows_async_probing+0x5d/0x5d driver_probe_device+0xd6/0x112 ? driver_allows_async_probing+0x5d/0x5d bus_for_each_drv+0xbe/0xe5 __device_attach+0xdd/0x15b bus_probe_device+0x5a/0x10b device_add+0x501/0x894 ? _raw_write_unlock+0x27/0x3a platform_device_add+0x224/0x2b7 mfd_add_device+0x718/0x75b ? __kmalloc+0x144/0x16a ? mfd_add_devices+0x38/0xdb mfd_add_devices+0x9b/0xdb intel_lpss_probe+0x7d4/0x8ee intel_lpss_pci_probe+0xac/0xd4 pci_device_probe+0x101/0x18e ... Revert the offending patch until a more comprehensive solution is available. Cc: Tony Lindgren <tony@atomide.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Phil Edworthy <phil.edworthy@renesas.com> Fixes: d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit beeeac43b6fae5f5eaf707b6fcc2bf1e09deb785 ]

This reverts commit d76c74387e1c978b6c5524a146ab0f3f72206f98.

While commit d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling")
fixes runtime PM handling when using kgdb, it introduces a traceback for
everyone else.

BUG: sleeping function called from invalid context at
	/mnt/host/source/src/third_party/kernel/next/drivers/base/power/runtime.c:1034
in_atomic(): 1, irqs_disabled(): 1, pid: 1, name: swapper/0
7 locks held by swapper/0/1:
 #0: 000000005ec5bc72 (&dev->mutex){....}, at: __driver_attach+0xb5/0x12b
 #1: 000000005d5fa9e5 (&dev->mutex){....}, at: __device_attach+0x3e/0x15b
 #2: 0000000047e93286 (serial_mutex){+.+.}, at: serial8250_register_8250_port+0x51/0x8bb
 #3: 000000003b328f07 (port_mutex){+.+.}, at: uart_add_one_port+0xab/0x8b0
 #4: 00000000fa313d4d (&port->mutex){+.+.}, at: uart_add_one_port+0xcc/0x8b0
 #5: 00000000090983ca (console_lock){+.+.}, at: vprintk_emit+0xdb/0x217
 #6: 00000000c743e583 (console_owner){-...}, at: console_unlock+0x211/0x60f
irq event stamp: 735222
__down_trylock_console_sem+0x4a/0x84
console_unlock+0x338/0x60f
__do_softirq+0x4a4/0x50d
irq_exit+0x64/0xe2
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5 #6
Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.286.0 03/15/2017
Call Trace:
 dump_stack+0x7d/0xbd
 ___might_sleep+0x238/0x259
 __pm_runtime_resume+0x4e/0xa4
 ? serial8250_rpm_get+0x2e/0x44
 serial8250_console_write+0x44/0x301
 ? lock_acquire+0x1b8/0x1fa
 console_unlock+0x577/0x60f
 vprintk_emit+0x1f0/0x217
 printk+0x52/0x6e
 register_console+0x43b/0x524
 uart_add_one_port+0x672/0x8b0
 ? set_io_from_upio+0x150/0x162
 serial8250_register_8250_port+0x825/0x8bb
 dw8250_probe+0x80c/0x8b0
 ? dw8250_serial_inq+0x8e/0x8e
 ? dw8250_check_lcr+0x108/0x108
 ? dw8250_runtime_resume+0x5b/0x5b
 ? dw8250_serial_outq+0xa1/0xa1
 ? dw8250_remove+0x115/0x115
 platform_drv_probe+0x76/0xc5
 really_probe+0x1f1/0x3ee
 ? driver_allows_async_probing+0x5d/0x5d
 driver_probe_device+0xd6/0x112
 ? driver_allows_async_probing+0x5d/0x5d
 bus_for_each_drv+0xbe/0xe5
 __device_attach+0xdd/0x15b
 bus_probe_device+0x5a/0x10b
 device_add+0x501/0x894
 ? _raw_write_unlock+0x27/0x3a
 platform_device_add+0x224/0x2b7
 mfd_add_device+0x718/0x75b
 ? __kmalloc+0x144/0x16a
 ? mfd_add_devices+0x38/0xdb
 mfd_add_devices+0x9b/0xdb
 intel_lpss_probe+0x7d4/0x8ee
 intel_lpss_pci_probe+0xac/0xd4
 pci_device_probe+0x101/0x18e
...

Revert the offending patch until a more comprehensive solution
is available.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Fixes: d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: cpm_uart: return immediately from console poll 2018-10-03T23:59:18+00:00 Christophe Leroy christophe.leroy@c-s.fr 2018-09-14T10:32:50+00:00 98e1a83c338e4f3377c842ee7d60a5c36a30f0b3 commit be28c1e3ca29887e207f0cbcd294cefe5074bab6 upstream. kgdb expects poll function to return immediately and returning NO_POLL_CHAR when no character is available. Fixes: f5316b4aea024 ("kgdb,8250,pl011: Return immediately from console poll") Cc: Jason Wessel <jason.wessel@windriver.com> Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be28c1e3ca29887e207f0cbcd294cefe5074bab6 upstream.

kgdb expects poll function to return immediately and
returning NO_POLL_CHAR when no character is available.

Fixes: f5316b4aea024 ("kgdb,8250,pl011: Return immediately from console poll")
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: mvebu-uart: Fix reporting of effective CSIZE to userspace 2018-10-03T23:59:18+00:00 Jan Kiszka jan.kiszka@siemens.com 2018-08-26T17:49:32+00:00 e91bf9073b44f3be71b80687a58e8fc1e8d25dd1 commit e0bf2d4982fe7d9ddaf550dd023803ea286f47fc upstream. Apparently, this driver (or the hardware) does not support character length settings. It's apparently running in 8-bit mode, but it makes userspace believe it's in 5-bit mode. That makes tcsetattr with CS8 incorrectly fail, breaking e.g. getty from busybox, thus the login shell on ttyMVx. Fix by hard-wiring CS8 into c_cflag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable <stable@vger.kernel.org> # 4.6+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e0bf2d4982fe7d9ddaf550dd023803ea286f47fc upstream.

Apparently, this driver (or the hardware) does not support character
length settings. It's apparently running in 8-bit mode, but it makes
userspace believe it's in 5-bit mode. That makes tcsetattr with CS8
incorrectly fail, breaking e.g. getty from busybox, thus the login shell
on ttyMVx.

Fix by hard-wiring CS8 into c_cflag.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Cc: stable <stable@vger.kernel.org> # 4.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: imx: restore handshaking irq for imx1 2018-10-03T23:59:17+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2018-09-20T12:11:17+00:00 5d554763aaac8009646301fd14b05607ec01d965 commit 7e620984b62532783912312e334f3c48cdacbd5d upstream. Back in 2015 when irda was dropped from the driver imx1 was broken. This change reintroduces the support for the third interrupt of the UART. Fixes: afe9cbb1a6ad ("serial: imx: drop support for IRDA") Cc: stable <stable@vger.kernel.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7e620984b62532783912312e334f3c48cdacbd5d upstream.

Back in 2015 when irda was dropped from the driver imx1 was broken. This
change reintroduces the support for the third interrupt of the UART.

Fixes: afe9cbb1a6ad ("serial: imx: drop support for IRDA")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: lpuart: avoid leaking struct tty_struct 2018-10-03T23:59:17+00:00 Stefan Agner stefan@agner.ch 2018-08-28T10:44:24+00:00 98ecfdf49ff73c87a5ab8fa7ba1f22db67da6f29 commit 3216c622a24b0ebb9c159a8d1daf7f17a106b3f5 upstream. The function tty_port_tty_get() gets a reference to the tty. Since the code is not using tty_port_tty_set(), the reference is kept even after closing the tty. Avoid using tty_port_tty_get() by directly access the tty instance. Since lpuart_start_rx_dma() is called from the .startup() and .set_termios() callback, it is safe to assume the tty instance is valid. Cc: stable@vger.kernel.org # v4.9+ Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3216c622a24b0ebb9c159a8d1daf7f17a106b3f5 upstream.

The function tty_port_tty_get() gets a reference to the tty. Since
the code is not using tty_port_tty_set(), the reference is kept
even after closing the tty.

Avoid using tty_port_tty_get() by directly access the tty instance.
Since lpuart_start_rx_dma() is called from the .startup() and
.set_termios() callback, it is safe to assume the tty instance is
valid.

Cc: stable@vger.kernel.org # v4.9+
Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: pxa: Fix an error handling path in 'serial_pxa_probe()' 2018-10-03T23:59:11+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2018-06-11T17:30:35+00:00 7a887d2a1f91b8a0856735ddc8bf6d38b06e2b5a [ Upstream commit 95a0e656580fab3128c7bee5f660c50784f53651 ] If port.line is out of range, we still need to release some resources, or we will leak them. Fixes: afc7851fab83 ("serial: pxa: Fix out-of-bounds access through serial port index") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 95a0e656580fab3128c7bee5f660c50784f53651 ]

If port.line is out of range, we still need to release some resources, or
we will leak them.

Fixes: afc7851fab83 ("serial: pxa: Fix out-of-bounds access through serial port index")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty: add error handling for pcmcia_loop_config 2018-10-03T23:59:11+00:00 Zhouyang Jia jiazhouyang09@gmail.com 2018-06-12T04:36:25+00:00 e65f712ea9369fcb7c1824d3eaa6dd19caa22482 [ Upstream commit 85c634e919bd6ef17427f26a52920aeba12e16ee ] When pcmcia_loop_config fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling pcmcia_loop_config. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 85c634e919bd6ef17427f26a52920aeba12e16ee ]

When pcmcia_loop_config fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling pcmcia_loop_config.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>