linux-stable.git/drivers/tty/serial/Makefile, branch linux-5.10.y Linux kernel stable tree tty: serial: imx: add dependence and build for earlycon 2020-08-18T11:54:34+00:00 Fugang Duan fugang.duan@nxp.com 2020-08-10T06:06:52+00:00 ea1fc02e12b647d8dd7515d1dba137847d8e951d Add the earlycon dependence and add earlycon Makefile support to allow to build the driver. Fixes: 699cc4dfd140 ("tty: serial: imx: add imx earlycon driver") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20200810060652.3436-1-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add the earlycon dependence and add earlycon Makefile support
to allow to build the driver.

Fixes: 699cc4dfd140 ("tty: serial: imx: add imx earlycon driver")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Link: https://lore.kernel.org/r/20200810060652.3436-1-fugang.duan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
{tty: serial, nand: onenand}: samsung: rename to fix build warning 2019-11-18T17:49:11+00:00 Sudip Mukherjee sudipm.mukherjee@gmail.com 2019-11-17T20:24:35+00:00 55ed51fff224a51dfb768cfac3e4498888474c87 Any arm config which has 'CONFIG_MTD_ONENAND_SAMSUNG=m' and 'CONFIG_SERIAL_SAMSUNG=m' gives a build warning: warning: same module names found: drivers/tty/serial/samsung.ko drivers/mtd/nand/onenand/samsung.ko Rename both drivers/tty/serial/samsung.c to drivers/tty/serial/samsung_tty.c and drivers/mtd/nand/onenand/samsung.c drivers/mtd/nand/onenand/samsung_mtd.c to fix the warning. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/r/20191117202435.28127-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Any arm config which has 'CONFIG_MTD_ONENAND_SAMSUNG=m' and
'CONFIG_SERIAL_SAMSUNG=m' gives a build warning:

warning: same module names found:
  drivers/tty/serial/samsung.ko
  drivers/mtd/nand/onenand/samsung.ko

Rename both drivers/tty/serial/samsung.c to
drivers/tty/serial/samsung_tty.c and drivers/mtd/nand/onenand/samsung.c
drivers/mtd/nand/onenand/samsung_mtd.c to fix the warning.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20191117202435.28127-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2019-09-18T17:50:47+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-09-18T17:50:47+00:00 e444d51b14c4795074f485c79debd234931f0e49 Pull tty/serial driver updates from Greg KH: "Even in this age, people are still making new serial port silicon, why... Anyway, here's the TTY and Serial driver update for 5.4-rc1. Lots of changes in here for a number of embedded serial port devices that are being worked on because people really like to see those console logs... Other than that, nothing major here, no core tty changes that anyone should care about. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (125 commits) serial: tegra: Add PIO mode support serial: tegra: report clk rate errors serial: tegra: add support to adjust baud rate serial: tegra: DT for Adjusted baud rates serial: tegra: add support to use 8 bytes trigger serial: tegra: set maximum num of uart ports to 8 serial: tegra: check for FIFO mode enabled status dt-binding: serial: tegra: add new chips serial: tegra: report error to upper tty layer serial: tegra: flush the RX fifo on frame error serial: tegra: avoid reg access when clk disabled serial: tegra: add support to ignore read serial: sprd: correct the wrong sequence of arguments dt-bindings: serial: Convert riscv,sifive-serial to json-schema serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control serial: max310x: Properly set flags in AutoCTS mode tty: serial: fix platform_no_drv_owner.cocci warnings dt-bindings: serial: Document Freescale LINFlexD UART serial: fsl_linflexuart: Update compatible string tty: n_gsm: avoid recursive locking with async port hangup ... 
Pull tty/serial driver updates from Greg KH:
 "Even in this age, people are still making new serial port silicon,
  why...

  Anyway, here's the TTY and Serial driver update for 5.4-rc1. Lots of
  changes in here for a number of embedded serial port devices that are
  being worked on because people really like to see those console
  logs...

  Other than that, nothing major here, no core tty changes that anyone
  should care about.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (125 commits)
  serial: tegra: Add PIO mode support
  serial: tegra: report clk rate errors
  serial: tegra: add support to adjust baud rate
  serial: tegra: DT for Adjusted baud rates
  serial: tegra: add support to use 8 bytes trigger
  serial: tegra: set maximum num of uart ports to 8
  serial: tegra: check for FIFO mode enabled status
  dt-binding: serial: tegra: add new chips
  serial: tegra: report error to upper tty layer
  serial: tegra: flush the RX fifo on frame error
  serial: tegra: avoid reg access when clk disabled
  serial: tegra: add support to ignore read
  serial: sprd: correct the wrong sequence of arguments
  dt-bindings: serial: Convert riscv,sifive-serial to json-schema
  serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control
  serial: max310x: Properly set flags in AutoCTS mode
  tty: serial: fix platform_no_drv_owner.cocci warnings
  dt-bindings: serial: Document Freescale LINFlexD UART
  serial: fsl_linflexuart: Update compatible string
  tty: n_gsm: avoid recursive locking with async port hangup
  ...
tty: serial: Add linflexuart driver for S32V234 2019-09-04T10:43:54+00:00 Stefan-gabriel Mirea stefan-gabriel.mirea@nxp.com 2019-08-09T11:29:16+00:00 09864c1cdf5c537bd01bff45181406e422ea988c Introduce support for LINFlex driver, based on: - the version of Freescale LPUART driver after commit b3e3bf2ef2c7 ("Merge 4.0-rc7 into tty-next"); - commit abf1e0a98083 ("tty: serial: fsl_lpuart: lock port on console write"). In this basic version, the driver can be tested using initramfs and relies on the clocks and pin muxing set up by U-Boot. Remarks concerning the earlycon support: - LinFlexD does not allow character transmissions in the INIT mode (see section 47.4.2.1 in the reference manual[1]). Therefore, a mutual exclusion between the first linflex_setup_watermark/linflex_set_termios executions and linflex_earlycon_putchar was employed and the characters normally sent to earlycon during initialization are kept in a buffer and sent afterwards. - Empirically, character transmission is also forbidden within the last 1-2 ms before entering the INIT mode, so we use an explicit timeout (PREINIT_DELAY) between linflex_earlycon_putchar and the first call to linflex_setup_watermark. - U-Boot currently uses the UART FIFO mode, while this driver makes the transition to the buffer mode. Therefore, the earlycon putchar function matches the U-Boot behavior before initializations and the Linux behavior after. [1] https://www.nxp.com/webapp/Download?colCode=S32V234RM Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com> Signed-off-by: Adrian.Nitu <adrian.nitu@freescale.com> Signed-off-by: Larisa Grigore <Larisa.Grigore@nxp.com> Signed-off-by: Ana Nedelcu <B56683@freescale.com> Signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com> Signed-off-by: Matthew Nunez <matthew.nunez@nxp.com> [stefan-gabriel.mirea@nxp.com: Reduced for upstreaming and implemented earlycon support] Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Link: https://lore.kernel.org/r/20190809112853.15846-6-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Introduce support for LINFlex driver, based on:
- the version of Freescale LPUART driver after commit b3e3bf2ef2c7 ("Merge
  4.0-rc7 into tty-next");
- commit abf1e0a98083 ("tty: serial: fsl_lpuart: lock port on console
  write").
In this basic version, the driver can be tested using initramfs and relies
on the clocks and pin muxing set up by U-Boot.

Remarks concerning the earlycon support:

- LinFlexD does not allow character transmissions in the INIT mode (see
  section 47.4.2.1 in the reference manual[1]). Therefore, a mutual
  exclusion between the first linflex_setup_watermark/linflex_set_termios
  executions and linflex_earlycon_putchar was employed and the characters
  normally sent to earlycon during initialization are kept in a buffer and
  sent afterwards.

- Empirically, character transmission is also forbidden within the last 1-2
  ms before entering the INIT mode, so we use an explicit timeout
  (PREINIT_DELAY) between linflex_earlycon_putchar and the first call to
  linflex_setup_watermark.

- U-Boot currently uses the UART FIFO mode, while this driver makes the
  transition to the buffer mode. Therefore, the earlycon putchar function
  matches the U-Boot behavior before initializations and the Linux behavior
  after.

[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM

Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com>
Signed-off-by: Adrian.Nitu <adrian.nitu@freescale.com>
Signed-off-by: Larisa Grigore <Larisa.Grigore@nxp.com>
Signed-off-by: Ana Nedelcu <B56683@freescale.com>
Signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com>
Signed-off-by: Matthew Nunez <matthew.nunez@nxp.com>
[stefan-gabriel.mirea@nxp.com: Reduced for upstreaming and implemented
                               earlycon support]
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Link: https://lore.kernel.org/r/20190809112853.15846-6-stefan-gabriel.mirea@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: remove ks8695 driver 2019-09-04T10:43:53+00:00 Arnd Bergmann arnd@arndb.de 2019-08-09T20:27:30+00:00 bd0d9d159988d1ebb97ea244ae4dfa8365ed7d85 The platform is getting removed, so there are no more users of this driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190809202749.742267-3-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The platform is getting removed, so there are no more users
of this driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190809202749.742267-3-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty/serial: remove the ioc3_serial driver 2019-08-16T18:33:56+00:00 Christoph Hellwig hch@lst.de 2019-08-13T07:24:54+00:00 9c860e4cf70870703ce57797660c19c192576c5c The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-9-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com> 
The SGI SN2 support is about to be removed.  Remove this driver that
depends on the SN2 support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-9-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>
tty/serial: remove the ioc4_serial driver 2019-08-16T18:33:56+00:00 Christoph Hellwig hch@lst.de 2019-08-13T07:24:53+00:00 a017ef17cfd810b9e81f2b9f3202d02bc952d5f6 The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-8-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com> 
The SGI SN2 support is about to be removed.  Remove this driver that
depends on the SN2 support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-8-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>
tty/serial: remove the sn_console driver 2019-08-16T18:33:56+00:00 Christoph Hellwig hch@lst.de 2019-08-13T07:24:52+00:00 08f9530a0f883b11fc4062a20703e8920c5980c7 The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-7-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com> 
The SGI SN2 support is about to be removed.  Remove this driver that
depends on the SN2 support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-7-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>
tty: serial: netx: Delete driver 2019-07-25T10:05:28+00:00 Linus Walleij linus.walleij@linaro.org 2019-07-22T06:51:46+00:00 4a2b8560e3dff8637ccb09524650864f60ebab7f The Netx ARM machine was deleted from the kernel. This driver had no users and has to go. Cc: Robert Schwebel <r.schwebel@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The Netx ARM machine was deleted from the kernel. This driver
had no users and has to go.

Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: mpsc: Remove obsolete MPSC driver 2019-07-03T17:28:40+00:00 Mark Greer mgreer@animalcreek.com 2019-06-26T16:05:53+00:00 ecd6bf67da3126e8ec731c2dd8cb6c2f17d9563a Support for the Marvell MV64x60 line of bridge chips that contained MPSC controllers has been removed and there are no other components that have that controller so remove its driver. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Link: https://lore.kernel.org/r/20190626160553.28518-1-mgreer@animalcreek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Support for the Marvell MV64x60 line of bridge chips that contained
MPSC controllers has been removed and there are no other components
that have that controller so remove its driver.

Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Link: https://lore.kernel.org/r/20190626160553.28518-1-mgreer@animalcreek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>