linux-stable.git/drivers/tty/serial/Kconfig, branch linux-3.2.y

tty: serial: fix typo "ARCH_S5P6450"

2013-03-20T15:03:34+00:00

commit 827aa0d36d486f359808c8fb931cf7a71011a09d upstream.

This could have been either ARCH_S5P64X0 or CPU_S5P6450. Looking at
commit 2555e663b367b8d555e76023f4de3f6338c28d6c ("ARM: S5P64X0: Add UART
serial support for S5P6450") - which added this typo - makes clear this
should be CPU_S5P6450.

Signed-off-by: Paul Bolle 
Acked-by: Kukjin Kim 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

pch_uart: Support new device LAPIS Semiconductor ML7831 IOH

2011-11-15T20:04:12+00:00

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA 
Acked-by: Alan Cox 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

TTY: serial, move 68360 driver to staging

2011-09-22T23:00:20+00:00

This driver has been broken at least since 2008. At that time,
a88487c79b (Fix compile errors in SGI console drivers) broke this
driver completely.

And since nobody noticed for the past 3 years, move it into staging. I
think this will rot there and we will throw it away completely after
some time. Or maybe someone will volunteer to fix it ;).

Signed-off-by: Jiri Slaby 
Cc: Geert Uytterhoeven 
Cc: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

tty: add a DesignWare 8250 driver

2011-08-26T18:38:46+00:00

The Synopsys DesignWare 8250 is an 8250 that has an extra interrupt that
gets raised when writing to the LCR when busy.  To handle this we need
special serial_out, serial_in and handle_irq methods.  Add a new
platform driver that uses these accessors.

Cc: Alan Cox 
Cc: Arnd Bergmann 
Signed-off-by: Jamie Iles 
Signed-off-by: Greg Kroah-Hartman

tty: Add support serial for EXYNOS4212 SoC

2011-08-24T22:28:00+00:00

According to add support EXYNOS4212 SoC, we need to enable
SERIAL_S5PV210 on EXYNOS4212.

Cc: Alan Cox 
Cc: Greg Kroah-Hartman 
Signed-off-by: Kukjin Kim 
Signed-off-by: Greg Kroah-Hartman

Revert "tty: serial8250: add helpers for the DesignWare 8250"

2011-08-24T22:25:49+00:00

This reverts commit 6b1a98d1c4851235d9b6764b3f7b7db7909fc760.

It causes a build error that needs to be resolved differently.

Cc: Alan Cox 
Cc: Arnd Bergmann 
Cc: Jamie Iles 
Signed-off-by: Greg Kroah-Hartman

tty: serial8250: add helpers for the DesignWare 8250

2011-08-23T17:54:19+00:00

The Synopsys DesignWare 8250 is an 8250 that has an extra interrupt that
gets raised when writing to the LCR when busy.  To handle this we need
special serial_out, serial_in and handle_irq methods.  Add a new
function serial8250_use_designware_io() that configures a uart_port with
these accessors.

Cc: Alan Cox 
Acked-by: Arnd Bergmann 
Signed-off-by: Jamie Iles 
Signed-off-by: Greg Kroah-Hartman

serial:blackfin: rename Blackfin serial driver to bfin_uart.c

2011-08-23T17:47:05+00:00

bfin_5xx.c is not a general name for all Blackfin chips.

Signed-off-by: Sonic Zhang 
Acked-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x

2011-08-01T16:10:16+00:00

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits)
  SH: static should be at beginning of declaration
  sh: move CLKDEV_xxx_ID macro to sh_clk.h
  sh: clock-shx3: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: modify I2C clock settings
  sh: clock-sh7343: modify I2C clock settings
  sh: clock-sh7723: modify I2C clock settings
  sh: clock-sh7722: modify I2C clock settings
  sh: clock-sh7724: modify I2C clock settings
  serial: sh-sci: Fix up pretty name printing for port IRQs.
  serial: sh-sci: Kill off per-port enable/disable callbacks.
  serial: sh-sci: Add missing module description/author bits.
  serial: sh-sci: Regtype probing doesn't need to be fatal.
  sh: Tidy up pre-clkdev clk_get() error handling.
  ...

Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

2011-07-26T06:09:27+00:00

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits)
  amba pl011: workaround for uart registers lockup
  n_gsm: fix the wrong FCS handling
  pch_uart: add missing comment about OKI ML7223
  pch_uart: Add MSI support
  tty: fix "IRQ45: nobody cared"
  PTI feature to allow user to name and mark masterchannel request.
  0 for o PTI Makefile bug.
  tty: serial: samsung.c remove legacy PM code.
  SERIAL: SC26xx: Fix link error.
  serial: mrst_max3110: initialize waitqueue earlier
  mrst_max3110: Change max missing message priority.
  tty: s5pv210: Add delay loop on fifo reset function for UART
  tty/serial: Fix XSCALE serial ports, e.g. ce4100
  serial: bfin_5xx: fix off-by-one with resource size
  drivers/tty: use printk_ratelimited() instead of printk_ratelimit()
  tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs
  tty: n_gsm: Add raw-ip support
  tty: n_gsm: expose gsmtty device nodes at ldisc open time
  pch_phub: Fix register miss-setting issue
  serial: 8250, increase PASS_LIMIT
  ...