linux-stable.git/drivers/tty/serial/8250, branch linux-6.2.y Linux kernel stable tree serial: 8250: Add missing wakeup event reporting 2023-05-11T14:11:24+00:00 Florian Fainelli f.fainelli@gmail.com 2023-04-14T17:02:39+00:00 d7c6aa39eb041e2a6a53106104200d11e2acc87f [ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ] An 8250 UART configured as a wake-up source would not have reported itself through sysfs as being the source of wake-up, correct that. Fixes: b3b708fa2780 ("wake up from a serial port") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ]

An 8250 UART configured as a wake-up source would not have reported
itself through sysfs as being the source of wake-up, correct that.

Fixes: b3b708fa2780 ("wake up from a serial port")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250_bcm7271: Fix arbitration handling 2023-05-11T14:11:20+00:00 Doug Berger opendmb@gmail.com 2023-03-09T19:02:24+00:00 d2f0b5e6fcc3f14298d88a6f7b59634fa745abcc [ Upstream commit 15ac1122fd6d4bf408a03e6f23c7ad4f60b22f9e ] The arbitration of the UART DMA is mishandled for a few exceptional cases when probing and releasing the driver. It is possible that the DMA register spaces are not defined in device tree for an instance of the driver, so attempts to access the registers in brcmuart_arbitration() would use NULL pointers. It is also possible for the probe function to return an error while still holding the UART DMA. This would prevent the UART DMA from being claimed by an instance that could use it. These errors are addressed by only releasing the UART DMA if it is held by this instance (i.e. priv->dma_enabled == 1) and directing early error paths in probe to this common release_dma handling. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230309190224.687380-1-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 15ac1122fd6d4bf408a03e6f23c7ad4f60b22f9e ]

The arbitration of the UART DMA is mishandled for a few
exceptional cases when probing and releasing the driver.

It is possible that the DMA register spaces are not defined in
device tree for an instance of the driver, so attempts to access
the registers in brcmuart_arbitration() would use NULL pointers.

It is also possible for the probe function to return an error
while still holding the UART DMA. This would prevent the UART
DMA from being claimed by an instance that could use it.

These errors are addressed by only releasing the UART DMA if it
is held by this instance (i.e. priv->dma_enabled == 1) and
directing early error paths in probe to this common release_dma
handling.

Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230309190224.687380-1-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250: Fix serial8250_tx_empty() race with DMA Tx 2023-05-11T14:10:50+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2023-03-17T11:33:18+00:00 601e1a9fefcd2f316cbfe77421cc79c7b56b5cdd commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f upstream. There's a potential race before THRE/TEMT deasserts when DMA Tx is starting up (or the next batch of continuous Tx is being submitted). This can lead to misdetecting Tx empty condition. It is entirely normal for THRE/TEMT to be set for some time after the DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely not empty at that point, it seems incorrect for serial8250_tx_empty() claim Tx is empty. Fix the race by also checking in serial8250_tx_empty() whether there's DMA Tx active. Note: This fix only addresses in-kernel race mainly to make using TCSADRAIN/FLUSH robust. Userspace can still cause other races but they seem userspace concurrency control problems. Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f upstream.

There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.

It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.

Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.

Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.

Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: Prevent starting up DMA Rx on THRI interrupt 2023-04-13T15:02:47+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2023-03-17T10:30:34+00:00 f23850d7eb2996ee727b93bffc68f5ffb21f94c6 commit 90b8596ac46043e4a782d9111f5b285251b13756 upstream. Hans de Goede reported Bluetooth adapters (HCIs) connected over an UART connection failed due corrupted Rx payload. The problem was narrowed down to DMA Rx starting on UART_IIR_THRI interrupt. The problem occurs despite LSR having DR bit set, which is precondition for attempting to start DMA Rx in the first place. From a debug patch: [x.807834] 8250irq: iir=cc lsr+saved=60 received=0/15 ier=0f dma_t/rx/err=0/0/0 [x.808676] 8250irq: iir=c2 lsr+saved=61 received=0/0 ier=0f dma_t/rx/err=0/0/0 [x.808776] 8250irq: iir=cc lsr+saved=60 received=1/12 ier=0d dma_t/rx/err=0/1/0 [x.808870] Bluetooth: hci0: Frame reassembly failed (-84) In the debug snippet, received field indicates 1 byte was transferred over DMA and 12 bytes after that with the non-DMA Rx. The sole byte DMA handled was corrupted (gets zeroed) which leads to the HCI failure. This problem became apparent after commit e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") changed Tx stop behavior. Tx stop is now triggered from a THRI interrupt. Despite that this problem looks like a HW bug, this fix is not adding UART_BUG_xx flag to the driver beucase it seems useful in general to avoid starting DMA when there are only a few bytes to transfer. Skipping DMA for small transfers avoids the extra overhead DMA incurs. Thus, don't setup DMA Rx on UART_IIR_THRI but leave it to a subsequent interrupt which has Rx a related IIR value. By returning false from handle_rx_dma(), the DMA vs non-DMA decision is postponed until either UART_IIR_RDI (FIFO threshold worth of bytes awaiting) or UART_IIR_TIMEOUT (inter-character timeout) triggers at a later time which allows better to discern whether the number of bytes warrants starting DMA or not. Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230317103034.12881-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 90b8596ac46043e4a782d9111f5b285251b13756 upstream.

Hans de Goede reported Bluetooth adapters (HCIs) connected over an UART
connection failed due corrupted Rx payload. The problem was narrowed
down to DMA Rx starting on UART_IIR_THRI interrupt. The problem occurs
despite LSR having DR bit set, which is precondition for attempting to
start DMA Rx in the first place.

From a debug patch:
[x.807834] 8250irq: iir=cc lsr+saved=60 received=0/15 ier=0f dma_t/rx/err=0/0/0
[x.808676] 8250irq: iir=c2 lsr+saved=61 received=0/0 ier=0f dma_t/rx/err=0/0/0
[x.808776] 8250irq: iir=cc lsr+saved=60 received=1/12 ier=0d dma_t/rx/err=0/1/0
[x.808870] Bluetooth: hci0: Frame reassembly failed (-84)

In the debug snippet, received field indicates 1 byte was transferred
over DMA and 12 bytes after that with the non-DMA Rx. The sole byte DMA
handled was corrupted (gets zeroed) which leads to the HCI failure.

This problem became apparent after commit e8ffbb71f783 ("serial: 8250:
use THRE & __stop_tx also with DMA") changed Tx stop behavior. Tx stop
is now triggered from a THRI interrupt.

Despite that this problem looks like a HW bug, this fix is not adding
UART_BUG_xx flag to the driver beucase it seems useful in general to
avoid starting DMA when there are only a few bytes to transfer.
Skipping DMA for small transfers avoids the extra overhead DMA incurs.

Thus, don't setup DMA Rx on UART_IIR_THRI but leave it to a subsequent
interrupt which has Rx a related IIR value.

By returning false from handle_rx_dma(), the DMA vs non-DMA decision is
postponed until either UART_IIR_RDI (FIFO threshold worth of bytes
awaiting) or UART_IIR_TIMEOUT (inter-character timeout) triggers at a
later time which allows better to discern whether the number of bytes
warrants starting DMA or not.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230317103034.12881-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it 2023-03-22T12:37:58+00:00 Randy Dunlap rdunlap@infradead.org 2023-02-26T05:39:53+00:00 32f36bc91f9132879fb390c543985858a88888b2 commit f8086d1a65ac693e3fd863128352b4b11ee7324d upstream. REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable") Cc: stable <stable@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oskar Senft <osk@google.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f8086d1a65ac693e3fd863128352b4b11ee7324d upstream.

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable")
Cc: stable <stable@kernel.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Oskar Senft <osk@google.com>
Cc: linux-serial@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_fsl: fix handle_irq locking 2023-03-22T12:37:57+00:00 Johan Hovold johan@kernel.org 2023-02-27T08:50:46+00:00 f0ff9d2e2d9f61467ec4838705dded40204429a2 commit 6e01f9a594ee0f69fb52cc8d11971612b4817f0b upstream. The 8250 handle_irq callback is not just called from the interrupt handler but also from a timer callback when polling (e.g. for ports without an interrupt line). Consequently the callback must explicitly disable interrupts to avoid a potential deadlock with another interrupt in polled mode. Fix up the two paths in the freescale callback that failed to re-enable interrupts when polling. Fixes: 853a9ae29e97 ("serial: 8250: fix handle_irq locking") Cc: stable@vger.kernel.org # 5.13 Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y/xYzqp4ogmOF5t0@kili Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230227085046.24282-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6e01f9a594ee0f69fb52cc8d11971612b4817f0b upstream.

The 8250 handle_irq callback is not just called from the interrupt
handler but also from a timer callback when polling (e.g. for ports
without an interrupt line). Consequently the callback must explicitly
disable interrupts to avoid a potential deadlock with another interrupt
in polled mode.

Fix up the two paths in the freescale callback that failed to re-enable
interrupts when polling.

Fixes: 853a9ae29e97 ("serial: 8250: fix handle_irq locking")
Cc: stable@vger.kernel.org	# 5.13
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y/xYzqp4ogmOF5t0@kili
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230227085046.24282-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_em: Fix UART port type 2023-03-22T12:37:57+00:00 Biju Das biju.das.jz@bp.renesas.com 2023-02-27T11:41:46+00:00 d3310e840ed05d587f548126e3421ceb40debcca commit 32e293be736b853f168cd065d9cbc1b0c69f545d upstream. As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART IP found on EMMA mobile SoC is Register-compatible with the general-purpose 16750 UART chip. Fix UART port type as 16750 and enable 64-bytes fifo support. Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 32e293be736b853f168cd065d9cbc1b0c69f545d upstream.

As per HW manual for  EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART
IP found on EMMA mobile SoC is Register-compatible with the
general-purpose 16750 UART chip. Fix UART port type as 16750 and
enable 64-bytes fifo support.

Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_dma: Fix DMA Rx rearm race 2023-01-31T10:15:16+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2023-01-30T11:48:41+00:00 57e9af7831dcf211c5c689c2a6f209f4abdf0bce As DMA Rx can be completed from two places, it is possible that DMA Rx completes before DMA completion callback had a chance to complete it. Once the previous DMA Rx has been completed, a new one can be started on the next UART interrupt. The following race is possible (uart_unlock_and_check_sysrq_irqrestore() replaced with spin_unlock_irqrestore() for simplicity/clarity): CPU0 CPU1 dma_rx_complete() serial8250_handle_irq() spin_lock_irqsave(&port->lock) handle_rx_dma() serial8250_rx_dma_flush() __dma_rx_complete() dma->rx_running = 0 // Complete DMA Rx spin_unlock_irqrestore(&port->lock) serial8250_handle_irq() spin_lock_irqsave(&port->lock) handle_rx_dma() serial8250_rx_dma() dma->rx_running = 1 // Setup a new DMA Rx spin_unlock_irqrestore(&port->lock) spin_lock_irqsave(&port->lock) // sees dma->rx_running = 1 __dma_rx_complete() dma->rx_running = 0 // Incorrectly complete // running DMA Rx This race seems somewhat theoretical to occur for real but handle it correctly regardless. Check what is the DMA status before complething anything in __dma_rx_complete(). Reported-by: Gilles BULOZ <gilles.buloz@kontron.com> Tested-by: Gilles BULOZ <gilles.buloz@kontron.com> Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
As DMA Rx can be completed from two places, it is possible that DMA Rx
completes before DMA completion callback had a chance to complete it.
Once the previous DMA Rx has been completed, a new one can be started
on the next UART interrupt. The following race is possible
(uart_unlock_and_check_sysrq_irqrestore() replaced with
spin_unlock_irqrestore() for simplicity/clarity):

CPU0					CPU1
					dma_rx_complete()
serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma_flush()
      __dma_rx_complete()
        dma->rx_running = 0
        // Complete DMA Rx
  spin_unlock_irqrestore(&port->lock)

serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma()
      dma->rx_running = 1
      // Setup a new DMA Rx
  spin_unlock_irqrestore(&port->lock)

					  spin_lock_irqsave(&port->lock)
					  // sees dma->rx_running = 1
					  __dma_rx_complete()
					    dma->rx_running = 0
					    // Incorrectly complete
					    // running DMA Rx

This race seems somewhat theoretical to occur for real but handle it
correctly regardless. Check what is the DMA status before complething
anything in __dma_rx_complete().

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_dma: Fix DMA Rx completion race 2023-01-31T10:15:16+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2023-01-30T11:48:40+00:00 31352811e13dc2313f101b890fd4b1ce760b5fe7 __dma_rx_complete() is called from two places: - Through the DMA completion callback dma_rx_complete() - From serial8250_rx_dma_flush() after IIR_RLSI or IIR_RX_TIMEOUT The former does not hold port's lock during __dma_rx_complete() which allows these two to race and potentially insert the same data twice. Extend port's lock coverage in dma_rx_complete() to prevent the race and check if the DMA Rx is still pending completion before calling into __dma_rx_complete(). Reported-by: Gilles BULOZ <gilles.buloz@kontron.com> Tested-by: Gilles BULOZ <gilles.buloz@kontron.com> Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230130114841.25749-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
__dma_rx_complete() is called from two places:
  - Through the DMA completion callback dma_rx_complete()
  - From serial8250_rx_dma_flush() after IIR_RLSI or IIR_RX_TIMEOUT
The former does not hold port's lock during __dma_rx_complete() which
allows these two to race and potentially insert the same data twice.

Extend port's lock coverage in dma_rx_complete() to prevent the race
and check if the DMA Rx is still pending completion before calling
into __dma_rx_complete().

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230130114841.25749-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: exar: Add support for Sealevel 7xxxC serial cards 2023-01-20T12:38:38+00:00 Matthew Howell matthew.howell@sealevel.com 2023-01-19T19:40:29+00:00 14ee78d5932afeb710c8305196a676a715bfdea8 Add support for Sealevel 7xxxC serial cards. This patch: * Adds IDs to recognize 7xxxC cards from Sealevel Systems. * Updates exar_pci_probe() to set nr_ports to last two bytes of primary dev ID for these cards. Signed-off-by: Matthew Howell <matthew.howell@sealevel.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add support for Sealevel 7xxxC serial cards.

This patch:
* Adds IDs to recognize 7xxxC cards from Sealevel Systems.
* Updates exar_pci_probe() to set nr_ports to last two bytes of primary
  dev ID for these cards.

Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>