linux-stable.git/drivers/tty/serial/8250, branch linux-5.8.y

serial: 8250_pci: Add Realtek 816a and 816b

2020-09-23T11:00:01+00:00

commit 3c5a87be170aba8ac40982182f812dcff6ed1ad1 upstream.

These serial ports are exposed by the OOB-management-engine on
RealManage-enabled network cards (e.g. AMD DASH enabled systems using
Realtek cards).

Because these have 3 BARs, they fail the "num_iomem <= 1" check in
serial_pci_guess_board.

I've manually checked the two IOMEM regions and BAR 2 doesn't seem to
respond to reads, but BAR 4 seems to be an MMIO version of the IO ports
(untested).

With this change, the ports are detected:
0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A
0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A

lspci output:
02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550])
        Subsystem: 17aa:5082
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ SERR- 
Cc: stable 
Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.org
Signed-off-by: Greg Kroah-Hartman

serial: 8250: change lock order in serial8250_do_startup()

2020-09-03T09:29:41+00:00

commit 205d300aea75623e1ae4aa43e0d265ab9cf195fd upstream.

We have a number of "uart.port->desc.lock vs desc.lock->uart.port"
lockdep reports coming from 8250 driver; this causes a bit of trouble
to people, so let's fix it.

The problem is reverse lock order in two different call paths:

chain #1:

 serial8250_do_startup()
  spin_lock_irqsave(&port->lock);
   disable_irq_nosync(port->irq);
    raw_spin_lock_irqsave(&desc->lock)

chain #2:

  __report_bad_irq()
   raw_spin_lock_irqsave(&desc->lock)
    for_each_action_of_desc()
     printk()
      spin_lock_irqsave(&port->lock);

Fix this by changing the order of locks in serial8250_do_startup():
 do disable_irq_nosync() first, which grabs desc->lock, and grab
 uart->port after that, so that chain #1 and chain #2 have same lock
 order.

Full lockdep splat:

 ======================================================
 WARNING: possible circular locking dependency detected
 5.4.39 #55 Not tainted
 ======================================================

 swapper/0/0 is trying to acquire lock:
 ffffffffab65b6c0 (console_owner){-...}, at: console_lock_spinning_enable+0x31/0x57

 but task is already holding lock:
 ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #2 (&irq_desc_lock_class){-.-.}:
        _raw_spin_lock_irqsave+0x61/0x8d
        __irq_get_desc_lock+0x65/0x89
        __disable_irq_nosync+0x3b/0x93
        serial8250_do_startup+0x451/0x75c
        uart_startup+0x1b4/0x2ff
        uart_port_activate+0x73/0xa0
        tty_port_open+0xae/0x10a
        uart_open+0x1b/0x26
        tty_open+0x24d/0x3a0
        chrdev_open+0xd5/0x1cc
        do_dentry_open+0x299/0x3c8
        path_openat+0x434/0x1100
        do_filp_open+0x9b/0x10a
        do_sys_open+0x15f/0x3d7
        kernel_init_freeable+0x157/0x1dd
        kernel_init+0xe/0x105
        ret_from_fork+0x27/0x50

 -> #1 (&port_lock_key){-.-.}:
        _raw_spin_lock_irqsave+0x61/0x8d
        serial8250_console_write+0xa7/0x2a0
        console_unlock+0x3b7/0x528
        vprintk_emit+0x111/0x17f
        printk+0x59/0x73
        register_console+0x336/0x3a4
        uart_add_one_port+0x51b/0x5be
        serial8250_register_8250_port+0x454/0x55e
        dw8250_probe+0x4dc/0x5b9
        platform_drv_probe+0x67/0x8b
        really_probe+0x14a/0x422
        driver_probe_device+0x66/0x130
        device_driver_attach+0x42/0x5b
        __driver_attach+0xca/0x139
        bus_for_each_dev+0x97/0xc9
        bus_add_driver+0x12b/0x228
        driver_register+0x64/0xed
        do_one_initcall+0x20c/0x4a6
        do_initcall_level+0xb5/0xc5
        do_basic_setup+0x4c/0x58
        kernel_init_freeable+0x13f/0x1dd
        kernel_init+0xe/0x105
        ret_from_fork+0x27/0x50

 -> #0 (console_owner){-...}:
        __lock_acquire+0x118d/0x2714
        lock_acquire+0x203/0x258
        console_lock_spinning_enable+0x51/0x57
        console_unlock+0x25d/0x528
        vprintk_emit+0x111/0x17f
        printk+0x59/0x73
        __report_bad_irq+0xa3/0xba
        note_interrupt+0x19a/0x1d6
        handle_irq_event_percpu+0x57/0x79
        handle_irq_event+0x36/0x55
        handle_fasteoi_irq+0xc2/0x18a
        do_IRQ+0xb3/0x157
        ret_from_intr+0x0/0x1d
        cpuidle_enter_state+0x12f/0x1fd
        cpuidle_enter+0x2e/0x3d
        do_idle+0x1ce/0x2ce
        cpu_startup_entry+0x1d/0x1f
        start_kernel+0x406/0x46a
        secondary_startup_64+0xa4/0xb0

 other info that might help us debug this:

 Chain exists of:
   console_owner --> &port_lock_key --> &irq_desc_lock_class

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&irq_desc_lock_class);
                                lock(&port_lock_key);
                                lock(&irq_desc_lock_class);
   lock(console_owner);

  *** DEADLOCK ***

 2 locks held by swapper/0/0:
  #0: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba
  #1: ffffffffab65b5c0 (console_lock){+.+.}, at: console_trylock_spinning+0x20/0x181

 stack backtrace:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.39 #55
 Hardware name: XXXXXX
 Call Trace:
  
  dump_stack+0xbf/0x133
  ? print_circular_bug+0xd6/0xe9
  check_noncircular+0x1b9/0x1c3
  __lock_acquire+0x118d/0x2714
  lock_acquire+0x203/0x258
  ? console_lock_spinning_enable+0x31/0x57
  console_lock_spinning_enable+0x51/0x57
  ? console_lock_spinning_enable+0x31/0x57
  console_unlock+0x25d/0x528
  ? console_trylock+0x18/0x4e
  vprintk_emit+0x111/0x17f
  ? lock_acquire+0x203/0x258
  printk+0x59/0x73
  __report_bad_irq+0xa3/0xba
  note_interrupt+0x19a/0x1d6
  handle_irq_event_percpu+0x57/0x79
  handle_irq_event+0x36/0x55
  handle_fasteoi_irq+0xc2/0x18a
  do_IRQ+0xb3/0x157
  common_interrupt+0xf/0xf
  

Signed-off-by: Sergey Senozhatsky 
Fixes: 768aec0b5bcc ("serial: 8250: fix shared interrupts issues with SMP and RT kernels")
Reported-by: Guenter Roeck 
Reported-by: Raul Rangel 
BugLink: https://bugs.chromium.org/p/chromium/issues/detail?id=1114800
Link: https://lore.kernel.org/lkml/CAHQZ30BnfX+gxjPm1DUd5psOTqbyDh4EJE=2=VAMW_VDafctkA@mail.gmail.com/T/#u
Reviewed-by: Andy Shevchenko 
Reviewed-by: Guenter Roeck 
Tested-by: Guenter Roeck 
Cc: stable 
Link: https://lore.kernel.org/r/20200817022646.1484638-1-sergey.senozhatsky@gmail.com
Signed-off-by: Greg Kroah-Hartman

serial: 8250_exar: Fix number of ports for Commtech PCIe cards

2020-09-03T09:29:41+00:00

commit c6b9e95dde7b54e6a53c47241201ab5a4035c320 upstream.

The following in 8250_exar.c line 589 is used to determine the number
of ports for each Exar board:

nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f;

If the number of ports a card has is not explicitly specified, it defaults
to the rightmost 4 bits of the PCI device ID. This is prone to error since
not all PCI device IDs contain a number which corresponds to the number of
ports that card provides.

This particular case involves COMMTECH_4222PCIE, COMMTECH_4224PCIE and
COMMTECH_4228PCIE cards with device IDs 0x0022, 0x0020 and 0x0021.
Currently the multiport cards receive 2, 0 and 1 port instead of 2, 4 and
8 ports respectively.

To fix this, each Commtech Fastcom PCIe card is given a struct where the
number of ports is explicitly specified. This ensures 'board->num_ports'
is used instead of the default 'pcidev->device & 0x0f'.

Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Valmer Huhn 
Tested-by: Valmer Huhn 
Cc: stable 
Link: https://lore.kernel.org/r/20200813165255.GC345440@icarus.concurrent-rt.com
Signed-off-by: Greg Kroah-Hartman

serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X

2020-07-24T08:58:14+00:00

Sealevel XR17V35X based devices are inoperable on kernel versions
4.11 and above due to a change in the GPIO preconfiguration introduced in
commit
7dea8165f1d. This patch fixes this by preconfiguring the GPIO on Sealevel
cards to the value (0x00) used prior to commit 7dea8165f1d

With GPIOs preconfigured as per commit 7dea8165f1d all ports on
Sealevel XR17V35X based devices become stuck in high impedance
mode, regardless of dip-switch or software configuration. This
causes the device to become effectively unusable. This patch (in
various forms) has been distributed to our customers and no issues
related to it have been reported.

Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output")
Signed-off-by: Matthew Howell 
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2007221605270.13247@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman

serial: 8250_mtk: Fix high-speed baud rates clamping

2020-07-21T19:23:18+00:00

Commit 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250
port") fixed limits of a baud rate setting for a generic 8250 port.
In other words since that commit the baud rate has been permitted to be
within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
normal for a standard 8250 UART port. But there are custom 8250 ports,
which provide extended baud rate limits. In particular the Mediatek 8250
port can work with baud rates up to "uartclk" speed.

Normally that and any other peculiarity is supposed to be handled in a
custom set_termios() callback implemented in the vendor-specific
8250-port glue-driver. Currently that is how it's done for the most of
the vendor-specific 8250 ports, but for some reason for Mediatek a
solution has been spread out to both the glue-driver and to the generic
8250-port code. Due to that a bug has been introduced, which permitted the
extended baud rate limit for all even for standard 8250-ports. The bug
has been fixed by the commit 7b668c064ec3 ("serial: 8250: Fix max baud
limit in generic 8250 port") by narrowing the baud rates limit back down to
the normal bounds. Unfortunately by doing so we also broke the
Mediatek-specific extended bauds feature.

A fix of the problem described above is twofold. First since we can't get
back the extended baud rate limits feature to the generic set_termios()
function and that method supports only a standard baud rates range, the
requested baud rate must be locally stored before calling it and then
restored back to the new termios structure after the generic set_termios()
finished its magic business. By doing so we still use the
serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
while the extended baud rate setting procedure will be performed later in
the custom Mediatek-specific set_termios() callback. Second since a true
baud rate is now fully calculated in the custom set_termios() method we
need to locally update the port timeout by calling the
uart_update_timeout() function. After the fixes described above are
implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
get back to normally working with extended baud rates.

Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com

Fixes: 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250 port")
Reported-by: Daniel Winkler 
Signed-off-by: Serge Semin 
Cc: stable 
Tested-by: Claire Chang 
Link: https://lore.kernel.org/r/20200714124113.20918-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Greg Kroah-Hartman

serial: 8250: fix null-ptr-deref in serial8250_start_tx()

2020-07-21T19:23:18+00:00

I got null-ptr-deref in serial8250_start_tx():

[   78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[   78.123778] Mem abort info:
[   78.126560]   ESR = 0x86000007
[   78.129603]   EC = 0x21: IABT (current EL), IL = 32 bits
[   78.134891]   SET = 0, FnV = 0
[   78.137933]   EA = 0, S1PTW = 0
[   78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600
[   78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000
[   78.160029] Internal error: Oops: 86000007 [#1] SMP
[   78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd
[   78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48
[   78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020
[   78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[   78.228435] pc : 0x0
[   78.230618] lr : serial8250_start_tx+0x160/0x260
[   78.235215] sp : ffff800062eefb80
[   78.238517] x29: ffff800062eefb80 x28: 0000000000000fff
[   78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000
[   78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000
[   78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002
[   78.259679] x21: 0000000000000001 x20: 0000000000000000
[   78.264969] x19: ffffa688827eecc8 x18: 0000000000000000
[   78.270259] x17: 0000000000000000 x16: 0000000000000000
[   78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6
[   78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539
[   78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0
[   78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88
[   78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000
[   78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8
[   78.307292] x3 : 0000000000000000 x2 : 0000000000000002
[   78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8
[   78.317873] Call trace:
[   78.320312]  0x0
[   78.322147]  __uart_start.isra.9+0x64/0x78
[   78.326229]  uart_start+0xb8/0x1c8
[   78.329620]  uart_flush_chars+0x24/0x30
[   78.333442]  n_tty_receive_buf_common+0x7b0/0xc30
[   78.338128]  n_tty_receive_buf+0x44/0x2c8
[   78.342122]  tty_ioctl+0x348/0x11f8
[   78.345599]  ksys_ioctl+0xd8/0xf8
[   78.348903]  __arm64_sys_ioctl+0x2c/0xc8
[   78.352812]  el0_svc_common.constprop.2+0x88/0x1b0
[   78.357583]  do_el0_svc+0x44/0xd0
[   78.360887]  el0_sync_handler+0x14c/0x1d0
[   78.364880]  el0_sync+0x140/0x180
[   78.368185] Code: bad PC value

SERIAL_PORT_DFNS is not defined on each arch, if it's not defined,
serial8250_set_defaults() won't be called in serial8250_isa_init_ports(),
so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref.
Fix this problem by calling serial8250_set_defaults() after init uart port.

Signed-off-by: Yang Yingliang 
Cc: stable 
Link: https://lore.kernel.org/r/20200721143852.4058352-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada

Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2020-06-07T16:52:36+00:00

Pull tty/serial driver updates from Greg KH:
 "Here is the tty and serial driver updates for 5.8-rc1

  Nothing huge at all, just a lot of little serial driver fixes, updates
  for new devices and features, and other small things. Full details are
  in the shortlog.

  All of these have been in linux-next with no issues for a while"

* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
  tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
  tty: serial: imx: clear Ageing Timer Interrupt in handler
  serial: 8250_fintek: Add F81966 Support
  sc16is7xx: Add flag to activate IrDA mode
  dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  serial: 8250: Support rs485 bus termination GPIO
  serial: 8520_port: Fix function param documentation
  dt-bindings: serial: Add binding for rs485 bus termination GPIO
  vt: keyboard: avoid signed integer overflow in k_ascii
  serial: 8250: Enable 16550A variants by default on non-x86
  tty: hvc_console, fix crashes on parallel open/close
  serial: imx: Initialize lock for non-registered console
  sc16is7xx: Read the LSR register for basic device presence check
  sc16is7xx: Allow sharing the IRQ line
  sc16is7xx: Use threaded IRQ
  sc16is7xx: Always use falling edge IRQ
  tty: n_gsm: Fix bogus i++ in gsm_data_kick
  tty: n_gsm: Remove unnecessary test in gsm_print_packet()
  serial: stm32: add no_console_suspend support
  tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
  ...

Merge tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2020-06-06T18:01:58+00:00

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Program MPS for RCiEP devices (Ashok Raj)

   - Fix pci_register_host_bridge() device_register() error handling
     (Rob Herring)

   - Fix pci_host_bridge struct device release/free handling (Rob
     Herring)

  Resource management:

   - Allow resizing BARs for devices on root bus (Ard Biesheuvel)

  Power management:

   - Reduce Thunderbolt resume time by working around devices that don't
     support DLL Link Active reporting (Mika Westerberg)

   - Work around a Pericom USB controller OHCI/EHCI PME# defect
     (Kai-Heng Feng)

  Virtualization:

   - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
     Raj)

   - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)

   - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)

  Error handling:

   - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
     (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)

   - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
     events (Kuppuswamy Sathyanarayanan)

   - Don't enable AER by default in Kconfig (Bjorn Helgaas)

  Peer-to-peer DMA:

   - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)

  ASPM:

   - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)

  Endpoint framework:

   - Fix DMA channel release in test (Kunihiko Hayashi)

   - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)

   - Add support to handle multiple base for mapping outbound memory
     (Lad Prabhakar)

  Generic host bridge driver:

   - Support building as module (Rob Herring)

   - Eliminate pci_host_common_probe wrappers (Rob Herring)

  Amlogic Meson PCIe controller driver:

   - Don't use FAST_LINK_MODE to set up link (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)

   - Fix clk_put() error (Jim Quinlan)

   - Fix window register offset (Jim Quinlan)

   - Assert fundamental reset on initialization (Nicolas Saenz Julienne)

   - Add notify xHCI reset property (Nicolas Saenz Julienne)

   - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
     Saenz Julienne)

   - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
     Saenz Julienne)

  Cadence PCIe controller driver:

   - Remove "cdns,max-outbound-regions" DT property (replaced by
     "ranges") (Kishon Vijay Abraham I)

   - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
     (Kishon Vijay Abraham I)

  Marvell Aardvark PCIe controller driver:

   - Improve link training (Marek Behún)

   - Add PHY support (Marek Behún)

   - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
     Behún)

   - Train link immediately after enabling training to work around
     detection issues with some cards (Pali Rohár)

   - Issue PERST via GPIO to work around detection issues (Pali Rohár)

   - Don't blindly enable ASPM L0s (Pali Rohár)

   - Replace custom macros by standard linux/pci_regs.h macros (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:

   - Fix probe failure path to release resource (Wei Hu)

   - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)

  Renesas R-Car PCIe controller driver:

   - Fix incorrect programming of OB windows (Andrew Murray)

   - Add suspend/resume (Kazufumi Ikeda)

   - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)

   - Add endpoint controller driver (Lad Prabhakar)

   - Fix PCIEPAMR mask calculation (Lad Prabhakar)

   - Add r8a77961 to DT binding (Yoshihiro Shimoda)

  Socionext UniPhier Pro5 controller driver:

   - Add endpoint controller driver (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:

   - Program outbound ATU upper limit register (Alan Mikhak)

   - Fix inner MSI IRQ domain registration (Marc Zyngier)

  Miscellaneous:

   - Check for platform_get_irq() failure consistently (negative return
     means failure) (Aman Sharma)

   - Fix several runtime PM get/put imbalances (Dinghao Liu)

   - Use flexible-array and struct_size() helpers for code cleanup
     (Gustavo A. R. Silva)

   - Update & fix issues in bridge emulation of PCIe registers (Jon
     Derrick)

   - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
     (Krzysztof Wilczyński)

   - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"

* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
  PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
  PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
  PCI/DPC: Print IRQ number used by port
  PCI/AER: Use "aer" variable for capability offset
  PCI/AER: Remove redundant dev->aer_cap checks
  PCI/AER: Remove redundant pci_is_pcie() checks
  PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
  PCI: tegra: Fix runtime PM imbalance on error
  PCI: vmd: Filter resource type bits from shadow register
  PCI: tegra194: Fix runtime PM imbalance on error
  dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
  PCI: hv: Use struct_size() helper
  PCI: Rename _DSM constants to align with spec
  PCI: Avoid FLR for AMD Starship USB 3.0
  PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
  x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
  PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
  PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
  PCI: dwc: Fix inner MSI IRQ domain registration
  PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
  ...

serial: 8250_early: Support kgdboc_earlycon

2020-06-02T14:15:46+00:00

Implement the read() function in the early console driver.  With
recent kgdb patches this allows you to use kgdb to debug fairly early
into the system boot.

We only bother implementing this if polling is enabled since kgdb
can't be enabled without that.

Signed-off-by: Douglas Anderson 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Daniel Thompson 
Link: https://lore.kernel.org/r/20200507130644.v4.11.I8f668556c244776523320a95b09373a86eda11b7@changeid
Signed-off-by: Daniel Thompson