linux-stable.git/drivers/thunderbolt, branch v6.9.2

thunderbolt: Avoid notify PM core about runtime PM resume

2024-04-10T07:49:58+00:00

Currently we notify PM core about occurred wakes after any resume. This
is not actually needed after resume from runtime suspend. Hence, notify
PM core about occurred wakes only after resume from system sleep. Also,
if the wake occurred in USB4 router upstream port, we don't notify the
PM core about it since it is not actually needed and can cause
unexpected autowake (e.g. if /sys/power/wakeup_count is used).

While there add the missing kernel-doc for tb_switch_resume().

Signed-off-by: Gil Fine 
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg

thunderbolt: Fix wake configurations after device unplug

2024-04-10T07:49:58+00:00

Currently we don't configure correctly the wake events after unplug of device
router. What can happen is that the downstream ports of host router will be
configured to wake on: USB4-wake and wake-on-disconnect, but not on
wake-on-connect. This may cause the later plugged device not to wake the
domain and fail in enumeration. Fix this by clearing downstream port's "USB4
Port is Configured" bit, after unplug of a device router.

Signed-off-by: Gil Fine 
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg

thunderbolt: Do not create DisplayPort tunnels on adapters of the same router

2024-04-02T05:51:12+00:00

Probably due to a firmware bug Dell TB16 dock announces that one of its
DisplayPort adapters is actually DP IN. Now this is possible and used
with some external GPUs but not likely in this case as we are dealing
with a dock. Anyways the problem is that the driver tries to create a
DisplayPort tunnel between adapters of the same router which then shows
to user that there is no picture on the display (because there are no
available DP OUT adapters on the dock anymore).

Fix this by not creating DisplayPort tunnels between adapters that are
on the same router.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10265
Fixes: 274baf695b08 ("thunderbolt: Add DP IN added last in the head of the list of DP resources")
Cc: Gil Fine 
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg

Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-03-21T19:35:20+00:00

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...

Merge tag 'thunderbolt-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next

2024-03-02T19:14:03+00:00

Mika writes:

thunderbolt: Changes for v6.9 merge window

This includes following USB4/Thunderbolt changes for the v6.9 merge
window:

  - Reset the topology also for USB4 v1 routers on driver load
  - DisplayPort tunneling and bandwidth allocation mode improvements
  - Tracepoint support for the control channel
  - Couple of minor fixes and cleanups.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (23 commits)
  thunderbolt: Constify the struct device_type usage
  thunderbolt: Add trace events support for the control channel
  thunderbolt: Keep the domain powered when USB4 port is in redrive mode
  thunderbolt: Improve DisplayPort tunnel setup process to be more robust
  thunderbolt: Calculate DisplayPort tunnel bandwidth after DPRX capabilities read
  thunderbolt: Reserve released DisplayPort bandwidth for a group for 10 seconds
  thunderbolt: Introduce tb_tunnel_direction_downstream()
  thunderbolt: Re-order bandwidth group functions
  thunderbolt: Fail the failed bandwidth request properly
  thunderbolt: Log an error if DPTX request is not cleared
  thunderbolt: Handle bandwidth allocation mode disable request
  thunderbolt: Re-calculate estimated bandwidth when allocation mode is enabled
  thunderbolt: Use DP_LOCAL_CAP for maximum bandwidth calculation
  thunderbolt: Correct typo in host_reset parameter
  thunderbolt: Skip discovery also in USB4 v2 host
  thunderbolt: Reset only non-USB4 host routers in resume
  thunderbolt: Remove usage of the deprecated ida_simple_xx() API
  thunderbolt: Fix rollback in tb_port_lane_bonding_enable() for lane 1
  thunderbolt: Fix XDomain rx_lanes_show and tx_lanes_show
  thunderbolt: Reset topology created by the boot firmware
  ...

Merge tag 'thunderbolt-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

2024-03-02T18:47:01+00:00

Mika writes:

thunderbolt: Fix for v6.8-rc7

This includes one USB4/Thunderbolt fix for v6.8-rc7:

  - Fix NULL pointer dereference in tb_port_update_credits() on
    Apple Thunderbolt 1 hardware.

This has been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()

thunderbolt: Constify the struct device_type usage

2024-02-26T07:15:49+00:00

Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
tb_domain_type, tb_retimer_type, tb_switch_type, usb4_port_device_type,
tb_service_type and tb_xdomain_type variables to be constant structures as
well, placing it into read-only memory which can not be modified at
runtime.

Cc: Greg Kroah-Hartman 
Signed-off-by: Ricardo B. Marliere 
Signed-off-by: Mika Westerberg

thunderbolt: Add trace events support for the control channel

2024-02-26T07:12:24+00:00

Sometimes it is useful to see the traffic happening inside the control
channel, especially when debugging a possible problem. This adds
tracepoints close to the hardware which can be enabled dynamically as
needed using the standard Linux trace events facility.

Signed-off-by: Gil Fine 
Co-developed-by: Mika Westerberg 
Signed-off-by: Mika Westerberg

thunderbolt: Keep the domain powered when USB4 port is in redrive mode

2024-02-26T07:12:12+00:00

If a DiplayPort cable is directly connected to the host routers USB4
port, there is no tunnel involved but the port is in "redrive" mode
meaning that it is re-driving the DisplayPort signals from its
DisplayPort source. In this case we need to keep the domain powered on
otherwise once the domain enters D3cold the connected monitor blanks
too.

Since this happens only on Intel Barlow Ridge add a quirk that takes
runtime PM reference if we detect that the USB4 port entered redrive
mode (and release it once it exits the mode).

Signed-off-by: Mika Westerberg

thunderbolt: Improve DisplayPort tunnel setup process to be more robust

2024-02-16T10:29:23+00:00

After DisplayPort tunnel setup, we add verification that the DPRX
capabilities read process completed. Otherwise, we bail out, teardown
the tunnel, and try setup another DisplayPort tunnel using next
available DP IN adapter. We do so till all DP IN adapters tried. This
way, we avoid allocating DP IN adapter and (bandwidth for it) for
unusable tunnel.

Signed-off-by: Gil Fine 
Signed-off-by: Mika Westerberg