linux-stable.git/drivers/thunderbolt, branch v5.12.2

thunderbolt: Fix off by one in tb_port_find_retimer()

2021-03-30T10:38:10+00:00

This array uses 1-based indexing so it corrupts memory one element
beyond of the array.  Fix it by making the array one element larger.

Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter 
Signed-off-by: Mika Westerberg

thunderbolt: Fix a leak in tb_retimer_add()

2021-03-30T10:37:32+00:00

After the device_register() succeeds, then the correct way to clean up
is to call device_unregister().  The unregister calls both device_del()
and device_put().  Since this code was only device_del() it results in
a memory leak.

Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter 
Reviewed-by: Jason Gunthorpe 
Signed-off-by: Mika Westerberg

thunderbolt: Increase runtime PM reference count on DP tunnel discovery

2021-03-08T11:22:42+00:00

If the driver is unbound and then bound back it goes over the topology
and figure out the existing tunnels. However, if it finds DP tunnel it
should make sure the domain does not runtime suspend as otherwise it
will tear down the DP tunnel unexpectedly.

Fixes: 6ac6faee5d7d ("thunderbolt: Add runtime PM for Software CM")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg

thunderbolt: Initialize HopID IDAs in tb_switch_alloc()

2021-03-08T11:22:35+00:00

If there is a failure before the tb_switch_add() is called the switch
object is released by tb_switch_release() but at that point HopID IDAs
have not yet been initialized. So we see splat like this:

BUG: spinlock bad magic on CPU#2, kworker/u8:5/115
...
Workqueue: thunderbolt0 tb_handle_hotplug
Call Trace:
 dump_stack+0x97/0xdc
 ? spin_bug+0x9a/0xa7
 do_raw_spin_lock+0x68/0x98
 _raw_spin_lock_irqsave+0x3f/0x5d
 ida_destroy+0x4f/0x127
 tb_switch_release+0x6d/0xfd
 device_release+0x2c/0x7d
 kobject_put+0x9b/0xbc
 tb_handle_hotplug+0x278/0x452
 process_one_work+0x1db/0x396
 worker_thread+0x216/0x375
 kthread+0x14d/0x155
 ? pr_cont_work+0x58/0x58
 ? kthread_blkcg+0x2e/0x2e
 ret_from_fork+0x1f/0x40

Fix this by always initializing HopID IDAs in tb_switch_alloc().

Fixes: 0b2863ac3cfd ("thunderbolt: Add functions for allocating and releasing HopIDs")
Cc: stable@vger.kernel.org
Reported-by: Chiranjeevi Rapolu 
Signed-off-by: Mika Westerberg

Merge tag 'thunderbolt-for-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next

2021-02-09T12:00:07+00:00

Mika writes:

thunderbolt: Changes for v5.12 merge window

This includes following Thunderbolt/USB4 changes for v5.12 merge
window:

  * Start lane initialization after sleep for Thunderbolt 3 compatible
    devices

  * Add support for de-authorizing PCIe tunnels (software based
    connection manager only)

  * Add support for new ACPI 6.4 USB4 _OSC

  * Allow disabling XDomain protocol

  * Add support for new SL5 security level

  * Clean up kernel-docs to pass W=1 builds

  * A couple of cleanups and minor fixes

All these have been in linux-next without reported issues.

* tag 'thunderbolt-for-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (27 commits)
  thunderbolt: Add support for native USB4 _OSC
  ACPI: Add support for native USB4 control _OSC
  ACPI: Execute platform _OSC also with query bit clear
  thunderbolt: Allow disabling XDomain protocol
  thunderbolt: Add support for PCIe tunneling disabled (SL5)
  thunderbolt: dma_test: Drop unnecessary include
  thunderbolt: Add clarifying comments about USB4 terms router and adapter
  thunderbolt: switch: Fix kernel-doc descriptions of non-static functions
  thunderbolt: nhi: Fix kernel-doc descriptions of non-static functions
  thunderbolt: path: Fix kernel-doc descriptions of non-static functions
  thunderbolt: eeprom: Fix kernel-doc descriptions of non-static functions
  thunderbolt: ctl: Fix kernel-doc descriptions of non-static functions
  thunderbolt: switch: Fix function name in the header
  thunderbolt: tunnel: Fix misspelling of 'receive_path'
  thunderbolt: icm: Fix a couple of formatting issues
  thunderbolt: switch: Demote a bunch of non-conformant kernel-doc headers
  thunderbolt: tb: Kernel-doc function headers should document their parameters
  thunderbolt: nhi: Demote some non-conformant kernel-doc headers
  thunderbolt: xdomain: Fix 'tb_unregister_service_driver()'s 'drv' param
  thunderbolt: eeprom: Demote non-conformant kernel-doc headers to standard comment blocks
  ...

thunderbolt: Add support for native USB4 _OSC

2021-02-04T07:45:25+00:00

ACPI 6.4 introduced a new _OSC capability used to negotiate whether the
OS is supposed to use Software (native) or Firmware based Connection
Manager. If the native support is granted then there are set of bits
that enable/disable different tunnel types that the Software Connection
Manager is allowed to tunnel.

This adds support for this new USB4 _OSC accordingly. When PCIe
tunneling is disabled then the driver switches security level to be
"nopcie" following the security level 5 used in Firmware based
Connection Manager.

Signed-off-by: Mika Westerberg 
Acked-by: Yehezkel Bernat

thunderbolt: Allow disabling XDomain protocol

2021-02-04T07:45:25+00:00

This allows disabling XDomain protocol completely if the user does not
plan to use the USB4/Thunderbolt peer-to-peer functionality, or for
security reasons.

XDomain protocol is enabled by default but with this commit it is
possible to disable it by passing "xdomain=0" as module parameter (or
through the kernel command line).

Signed-off-by: Mika Westerberg 
Acked-by: Yehezkel Bernat

thunderbolt: Add support for PCIe tunneling disabled (SL5)

2021-02-04T07:45:24+00:00

Recent Intel Thunderbolt firmware connection manager has support for
another security level, SL5, that disables PCIe tunneling. This option
can be turned on from the BIOS.

When this is set the driver exposes a new security level "nopcie" to the
userspace and hides the authorized attribute under connected devices.

While there we also hide it when "dponly" security level is enabled
since it is not really usable in that case anyway.

Signed-off-by: Mika Westerberg 
Acked-by: Yehezkel Bernat

thunderbolt: dma_test: Drop unnecessary include

2021-02-04T07:39:13+00:00

It seems  is not actually needed in this driver so we can
drop it.

Signed-off-by: Mika Westerberg

thunderbolt: Add clarifying comments about USB4 terms router and adapter

2021-02-04T07:38:38+00:00

USB4 spec talks about routers and adapters whereas Thunderbolt 1-3
talked about CIO (Converged I/O) switches and ports. These are the same
thing but might cause confusion so add clarifying comments to struct
tb_switch and struct tb_port about the USB4 terms.

Signed-off-by: Mika Westerberg