linux-stable.git/drivers/thermal, branch v6.1.73

thermal: core: prevent potential string overflow

2023-11-20T10:51:54+00:00

[ Upstream commit c99626092efca3061b387043d4a7399bf75fbdd5 ]

The dev->id value comes from ida_alloc() so it's a number between zero
and INT_MAX.  If it's too high then these sprintf()s will overflow.

Fixes: 203d3d4aa482 ("the generic thermal sysfs driver")
Signed-off-by: Dan Carpenter 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal/of: add missing of_node_put()

2023-10-06T12:56:53+00:00

[ Upstream commit 8a81cf96f5510aaf9a65d103f7405079a7b0fcc5 ]

for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.

This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci

Signed-off-by: Julia Lawall 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal/of: Fix potential uninitialized value access

2023-09-13T07:42:29+00:00

[ Upstream commit f96801f0cfcefc0a16b146596577c53c75ee9773 ]

If of_parse_phandle_with_args() called from __thermal_of_bind() or
__thermal_of_unbind() fails, cooling_spec.np will not be initialized,
so move the of_node_put() calls below the respective return value checks
to avoid dereferencing an uninitialized pointer.

Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Peng Fan 
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal/drivers/sun8i: Fix some error handling paths in sun8i_ths_probe()

2023-07-19T14:21:01+00:00

[ Upstream commit 89382022b370dfd34eaae9c863baa123fcd4d132 ]

Should an error occur after calling sun8i_ths_resource_init() in the probe
function, some resources need to be released, as already done in the
.remove() function.

Switch to the devm_clk_get_enabled() helper and add a new devm_action to
turn sun8i_ths_resource_init() into a fully managed function.

Move the place where reset_control_deassert() is called so that the
recommended order of reset release/clock enable steps is kept.
A64 manual states that:

	3.3.6.4. Gating and reset

	Make sure that the reset signal has been released before the release of
	module clock gating;

This fixes the issue and removes some LoC at the same time.

Fixes: dccc5c3b6f30 ("thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40")
Signed-off-by: Christophe JAILLET 
Acked-by: Maxime Ripard 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/a8ae84bd2dc4b55fe428f8e20f31438bf8bb6762.1684089931.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin

Revert "thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe"

2023-07-01T11:16:26+00:00

commit 86edac7d3888c715fe3a81bd61f3617ecfe2e1dd upstream.

This reverts commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26.

That change was causing a regression in the generic-adc-thermal-probed
bootrr test as reported in the kernelci-results list [1].
A proper rework will take longer, so revert it for now.

[1] https://groups.io/g/kernelci-results/message/42660

Fixes: f05c7b7d9ea9 ("thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe")
Signed-off-by: Ricardo Cañuelo 
Suggested-by: AngeloGioacchino Del Regno 
Reviewed-by: AngeloGioacchino Del Regno 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20230525121811.3360268-1-ricardo.canuelo@collabora.com
Signed-off-by: Greg Kroah-Hartman

thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe

2023-05-11T14:03:37+00:00

[ Upstream commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26 ]

Smatch reports:
1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released.
2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released.

The original code forgets to release iomap resource when handling errors,
fix it by switch to devm_of_iomap.

Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system")
Signed-off-by: Kang Chen 
Reviewed-by: Dongliang Mu 
Reviewed-by: AngeloGioacchino Del Regno 
Signed-off-by: Daniel Lezcano 
Link: https://lore.kernel.org/r/20230419020749.621257-1-void0red@hust.edu.cn
Signed-off-by: Sasha Levin

thermal: intel: BXT_PMIC: select REGMAP instead of depending on it

2023-03-11T12:55:32+00:00

[ Upstream commit 1467fb960349dfa5e300658f1a409dde2cfb0c51 ]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: b474303ffd57 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver")
Signed-off-by: Randy Dunlap 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal: intel: quark_dts: fix error pointer dereference

2023-03-11T12:55:31+00:00

[ Upstream commit f1b930e740811d416de4d2074da48b6633a672c8 ]

If alloc_soc_dts() fails, then we can just return.  Trying to free
"soc_dts" will lead to an Oops.

Fixes: 8c1876939663 ("thermal: intel Quark SoC X1000 DTS thermal driver")
Signed-off-by: Dan Carpenter 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal: intel: powerclamp: Fix cur_state for multi package system

2023-03-10T08:34:22+00:00

commit 8e47363588377e1bdb65e2b020b409cfb44dd260 upstream.

The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.

It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.

For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.

Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.

Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada 
Cc: 4.14+  # 4.14+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

thermal: intel: intel_pch: Add support for Wellsburg PCH

2023-03-10T08:33:50+00:00

[ Upstream commit 40dc1929089fc844ea06d9f8bdb6211ed4517c2e ]

Add the PCI ID for the Wellsburg C610 series chipset PCH.

The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.

Signed-off-by: Tim Zimmermann 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin