Pull thermal fixes from Daniel Lezcano: - Fix invalid index array access on int340x_thermal leading to a kernel panic (Bartosz Szczepanek) - Fix debug message level to prevent flooding on some platform (Alex Hung) - Fix invalid bank access by reverting "thermal: mediatek: fix register index error" (Enric Balletbo i Serra) * tag 'thermal-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: Revert "thermal: mediatek: fix register index error" thermal: int3403_thermal: Downgrade error message thermal/int340x_thermal: Prevent page fault on .set_mode() op
This reverts commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6
The above patch is supposed to fix a register index error on mt2701. It
is not clear if the problem solved is a hang or just an invalid value
returned, my guess is the second. The patch introduces, though, a new
hang on MT8173 device making them unusable. So, seems reasonable, revert
the patch because introduces a worst issue.
The reason I send a revert instead of trying to fix the issue for MT8173
is because the information needed to fix the issue is in the datasheet
and is not public. So I am not really able to fix it.
Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173
devices.
[ 2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001
[ 2.230421] Mem abort info:
[ 2.233207] ESR = 0x96000021
[ 2.236261] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.241571] SET = 0, FnV = 0
[ 2.244623] EA = 0, S1PTW = 0
[ 2.247762] Data abort info:
[ 2.250640] ISV = 0, ISS = 0x00000021
[ 2.254473] CM = 0, WnR = 0
[ 2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000
[ 2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707
[ 2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[ 2.280432] Modules linked in:
[ 2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162
[ 2.289914] Hardware name: Google Elm (DT)
[ 2.294003] pstate: 20000005 (nzCv daif -PAN -UAO)
[ 2.298792] pc : mtk_read_temp+0xb8/0x1c8
[ 2.302793] lr : mtk_read_temp+0x7c/0x1c8
[ 2.306794] sp : ffff80001003b930
[ 2.310100] x29: ffff80001003b930 x28: 0000000000000000
[ 2.315404] x27: 0000000000000002 x26: ffff0000f9550b10
[ 2.320709] x25: ffff0000f9550a80 x24: 0000000000000090
[ 2.326014] x23: ffff80001003ba24 x22: 00000000610344c0
[ 2.331318] x21: 0000000000002710 x20: 00000000000001f4
[ 2.336622] x19: 0000000000030d40 x18: ffff800011742ec0
[ 2.341926] x17: 0000000000000001 x16: 0000000000000001
[ 2.347230] x15: ffffffffffffffff x14: ffffff0000000000
[ 2.352535] x13: ffffffffffffffff x12: 0000000000000028
[ 2.357839] x11: 0000000000000003 x10: ffff800011295ec8
[ 2.363143] x9 : 000000000000291b x8 : 0000000000000002
[ 2.368447] x7 : 00000000000000a8 x6 : 0000000000000004
[ 2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0
[ 2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001
[ 2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80
[ 2.389665] Call trace:
[ 2.392105] mtk_read_temp+0xb8/0x1c8
[ 2.395760] of_thermal_get_temp+0x2c/0x40
[ 2.399849] thermal_zone_get_temp+0x78/0x160
[ 2.404198] thermal_zone_device_update.part.0+0x3c/0x1f8
[ 2.409589] thermal_zone_device_update+0x34/0x48
[ 2.414286] of_thermal_set_mode+0x58/0x88
[ 2.418375] thermal_zone_of_sensor_register+0x1a8/0x1d8
[ 2.423679] devm_thermal_zone_of_sensor_register+0x64/0xb0
[ 2.429242] mtk_thermal_probe+0x690/0x7d0
[ 2.433333] platform_drv_probe+0x5c/0xb0
[ 2.437335] really_probe+0xe4/0x448
[ 2.440901] driver_probe_device+0xe8/0x140
[ 2.445077] device_driver_attach+0x7c/0x88
[ 2.449252] __driver_attach+0xac/0x178
[ 2.453082] bus_for_each_dev+0x78/0xc8
[ 2.456909] driver_attach+0x2c/0x38
[ 2.460476] bus_add_driver+0x14c/0x230
[ 2.464304] driver_register+0x6c/0x128
[ 2.468131] __platform_driver_register+0x50/0x60
[ 2.472831] mtk_thermal_driver_init+0x24/0x30
[ 2.477268] do_one_initcall+0x50/0x298
[ 2.481098] kernel_init_freeable+0x1ec/0x264
[ 2.485450] kernel_init+0x1c/0x110
[ 2.488931] ret_from_fork+0x10/0x1c
[ 2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042)
[ 2.498599] ---[ end trace e43e3105ed27dc99 ]---
[ 2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 2.511020] SMP: stopping secondary CPUs
[ 2.514941] Kernel Offset: disabled
[ 2.518421] CPU features: 0x090002,25006005
[ 2.522595] Memory Limit: none
[ 2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--
Cc: Michael Kao <michael.kao@mediatek.com>
Fixes: eb9aecd90d1a ("thermal: mediatek: fix register index error")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.com
Downgrade "Unsupported event" message from dev_err to dev_dbg to avoid flooding with this message on some platforms. Cc: stable@vger.kernel.org # v5.4+ Suggested-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Alex Hung <alex.hung@canonical.com> [ rzhang: fix typo in changelog ] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200615223957.183153-1-alex.hung@canonical.com
Starting from commit "thermal/int340x_thermal: Don't require IDSP to
exist", priv->current_uuid_index is initialized to -1. This value may
be passed to int3400_thermal_run_osc() from int3400_thermal_set_mode,
contributing to page fault when accessing int3400_thermal_uuids array
at index -1.
This commit adds a check on uuid value to int3400_thermal_run_osc.
Fixes: 8d485da0ddee ("thermal/int340x_thermal: Don't require IDSP to exist")
Signed-off-by: Bartosz Szczepanek <bsz@semihalf.com>
Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com>
[ rzhang: Add Fixes tag ]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20200708134613.131555-1-bsz@semihalf.com
As description for DIV_ROUND_CLOSEST in file include/linux/kernel.h.
"Result is undefined for negative divisors if the dividend variable
type is unsigned and for negative dividends if the divisor variable
type is unsigned."
In current code, the FIXPT_DIV uses DIV_ROUND_CLOSEST but has not
checked sign of divisor before using. It makes undefined temperature
value in case the value is negative.
This patch fixes to satisfy DIV_ROUND_CLOSEST description
and fix bug too. Note that the variable name "reg" is not good
because it should be the same type as rcar_gen3_thermal_read().
However, it's better to rename the "reg" in a further patch as
cleanup.
Signed-off-by: Van Do <van.do.xw@renesas.com>
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
[shimoda: minor fixes, add Fixes tag]
Fixes: 564e73d283af ("thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1593085099-2057-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
The function cpu_power_to_freq is used to find a frequency and set the
cooling device to consume at most the power to be converted. For example,
if the power to be converted is 80mW, and the em table is as follow.
struct em_cap_state table[] = {
/* KHz mW */
{ 1008000, 36, 0 },
{ 1200000, 49, 0 },
{ 1296000, 59, 0 },
{ 1416000, 72, 0 },
{ 1512000, 86, 0 },
};
The target frequency should be 1416000KHz, not 1512000KHz.
Fixes: 349d39dc5739 ("thermal: cpu_cooling: merge frequency and power tables")
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.com
After merging tsens-common.c into tsens.c, we can now mark some functions static so they don't need any prototype declarations. This fixes the following issue reported by lkp. >> drivers/thermal/qcom/tsens.c:385:13: warning: no previous prototype for 'tsens_critical_irq_thread' [-Wmissing-prototypes] 385 | irqreturn_t tsens_critical_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:455:13: warning: no previous prototype for 'tsens_irq_thread' [-Wmissing-prototypes] 455 | irqreturn_t tsens_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:523:5: warning: no previous prototype for 'tsens_set_trips' [-Wmissing-prototypes] 523 | int tsens_set_trips(void *_sensor, int low, int high) | ^~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:560:5: warning: no previous prototype for 'tsens_enable_irq' [-Wmissing-prototypes] 560 | int tsens_enable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:573:6: warning: no previous prototype for 'tsens_disable_irq' [-Wmissing-prototypes] 573 | void tsens_disable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~~ Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/6757a26876b29922929abf64b1c11fa3b3033d03.1590579709.git.amit.kucheria@linaro.org
When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Fixes: 554fdbaf19b1 ("thermal: sprd: Add Spreadtrum thermal driver support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1590371941-25430-1-git-send-email-yangtiezhu@loongson.cn
MT8183_NUM_ZONES should be set to 1
because MT8183 doesn't have multiple banks.
Fixes: a4ffe6b52d27 ("thermal: mediatek: add support for MT8183")
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200323121537.22697-6-michael.kao@mediatek.com
After finishing using cpu node got from of_get_cpu_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1585232945-23368-1-git-send-email-Anson.Huang@nxp.com