linux-stable.git/drivers/thermal, branch v5.4.151 Linux kernel stable tree thermal/drivers/int340x: Do not set a wrong tcc offset on resume 2021-09-30T08:09:26+00:00 Antoine Tenart atenart@kernel.org 2021-09-09T08:56:12+00:00 04783de9c0f3c69741b5e7a5e957f26d6914130c commit 8b4bd256674720709a9d858a219fcac6f2f253b5 upstream. After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due to overheat (when it should not). It turned out this was due to commit fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting"). What happens is this drivers uses a global variable to keep track of the tcc offset (tcc_offset_save) and uses it on resume. The issue is this variable is initialized to 0, but is only set in tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly set by userspace. If that does not happen, the resume path will set the offset to 0 (in my case the h/w default being 3, the offset would become too low after a suspend/resume cycle). The issue did not arise before commit fe6a6de6692e, as the function setting the offset would return if the offset was 0. This is no longer the case (rightfully). Fix this by not applying the offset if it wasn't saved before, reverting back to the old logic. A better approach will come later, but this will be easier to apply to stable kernels. The logic to restore the offset after a resume was there long before commit fe6a6de6692e, but as a value of 0 was considered invalid I'm referencing the commit that made the issue possible in the Fixes tag instead. Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting") Cc: stable@vger.kernel.org Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8b4bd256674720709a9d858a219fcac6f2f253b5 upstream.

After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due
to overheat (when it should not). It turned out this was due to commit
fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting").

What happens is this drivers uses a global variable to keep track of the
tcc offset (tcc_offset_save) and uses it on resume. The issue is this
variable is initialized to 0, but is only set in
tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly
set by userspace. If that does not happen, the resume path will set the
offset to 0 (in my case the h/w default being 3, the offset would become
too low after a suspend/resume cycle).

The issue did not arise before commit fe6a6de6692e, as the function
setting the offset would return if the offset was 0. This is no longer
the case (rightfully).

Fix this by not applying the offset if it wasn't saved before, reverting
back to the old logic. A better approach will come later, but this will
be easier to apply to stable kernels.

The logic to restore the offset after a resume was there long before
commit fe6a6de6692e, but as a value of 0 was considered invalid I'm
referencing the commit that made the issue possible in the Fixes tag
instead.

Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting")
Cc: stable@vger.kernel.org
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thermal/core: Potential buffer overflow in thermal_build_list_of_policies() 2021-09-30T08:09:23+00:00 Dan Carpenter dan.carpenter@oracle.com 2021-09-16T13:13:42+00:00 1c1062c5cf215c960373c75acb96dc601714ed88 [ Upstream commit 1bb30b20b49773369c299d4d6c65227201328663 ] After printing the list of thermal governors, then this function prints a newline character. The problem is that "size" has not been updated after printing the last governor. This means that it can write one character (the NUL terminator) beyond the end of the buffer. Get rid of the "size" variable and just use "PAGE_SIZE - count" directly. Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210916131342.GB25094@kili Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1bb30b20b49773369c299d4d6c65227201328663 ]

After printing the list of thermal governors, then this function prints
a newline character.  The problem is that "size" has not been updated
after printing the last governor.  This means that it can write one
character (the NUL terminator) beyond the end of the buffer.

Get rid of the "size" variable and just use "PAGE_SIZE - count" directly.

Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210916131342.GB25094@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe() 2021-09-26T12:07:08+00:00 Dan Carpenter dan.carpenter@oracle.com 2021-08-10T08:44:13+00:00 c3b45ea0a3c890f807519311e70853c8310151d9 commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream. This error path return success but it should propagate the negative error code from devm_clk_get(). Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210810084413.GA23810@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream.

This error path return success but it should propagate the negative
error code from devm_clk_get().

Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210810084413.GA23810@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thermal/core: Correct function name thermal_zone_device_unregister() 2021-07-25T12:35:12+00:00 Yang Yingliang yangyingliang@huawei.com 2021-05-17T05:10:20+00:00 484193b635a76e8621d1ae156770543070f5f7dd [ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ] Fix the following make W=1 kernel build warning: drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ]

Fix the following make W=1 kernel build warning:

  drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations 2021-07-20T14:10:53+00:00 Niklas Söderlund niklas.soderlund+renesas@ragnatech.se 2021-06-05T08:52:11+00:00 65f32d1e05149bf9f37810850bac879cd8875352 [ Upstream commit 8946187ab57ffd02088e50256c73dd31f49db06d ] The fixed value of 157 used in the calculations are only correct for M3-W, on other Gen3 SoC it should be 167. The constant can be derived correctly from the static TJ_3 constant and the SoC specific TJ_1 value. Update the calculation be correct on all Gen3 SoCs. Fixes: 4eb39f79ef44 ("thermal: rcar_gen3_thermal: Update value of Tj_1") Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210605085211.564909-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8946187ab57ffd02088e50256c73dd31f49db06d ]

The fixed value of 157 used in the calculations are only correct for
M3-W, on other Gen3 SoC it should be 167. The constant can be derived
correctly from the static TJ_3 constant and the SoC specific TJ_1 value.
Update the calculation be correct on all Gen3 SoCs.

Fixes: 4eb39f79ef44 ("thermal: rcar_gen3_thermal: Update value of Tj_1")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210605085211.564909-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
thermal/drivers/int340x/processor_thermal: Fix tcc setting 2021-07-19T06:53:16+00:00 Srinivas Pandruvada srinivas.pandruvada@linux.intel.com 2021-06-28T21:58:03+00:00 5e4aae9e3e6b16485ebf9053477cb81502df268a commit fe6a6de6692e7f7159c1ff42b07ecd737df712b4 upstream. The following fixes are done for tcc sysfs interface: - TCC is 6 bits only from bit 29-24 - TCC of 0 is valid - When BIT(31) is set, this register is read only - Check for invalid tcc value - Error for negative values Fixes: fdf4f2fb8e899 ("drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210628215803.75038-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fe6a6de6692e7f7159c1ff42b07ecd737df712b4 upstream.

The following fixes are done for tcc sysfs interface:
- TCC is 6 bits only from bit 29-24
- TCC of 0 is valid
- When BIT(31) is set, this register is read only
- Check for invalid tcc value
- Error for negative values

Fixes: fdf4f2fb8e899 ("drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210628215803.75038-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID 2021-06-03T06:59:05+00:00 Srinivas Pandruvada srinivas.pandruvada@linux.intel.com 2021-04-30T12:23:43+00:00 2cd572cc45b55b9220a1dbd0b9ef5539fa97b9fa commit eb8500b874cf295971a6a2a04e14eb0854197a3c upstream. After commit 81ad4276b505 ("Thermal: Ignore invalid trip points") all user_space governor notifications via RW trip point is broken in intel thermal drivers. This commits marks trip_points with value of 0 during call to thermal_zone_device_register() as invalid. RW trip points can be 0 as user space will set the correct trip temperature later. During driver init, x86_package_temp and all int340x drivers sets RW trip temperature as 0. This results in all these trips marked as invalid by the thermal core. To fix this initialize RW trips to THERMAL_TEMP_INVALID instead of 0. Cc: <stable@vger.kernel.org> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210430122343.1789899-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit eb8500b874cf295971a6a2a04e14eb0854197a3c upstream.

After commit 81ad4276b505 ("Thermal: Ignore invalid trip points") all
user_space governor notifications via RW trip point is broken in intel
thermal drivers. This commits marks trip_points with value of 0 during
call to thermal_zone_device_register() as invalid. RW trip points can be
0 as user space will set the correct trip temperature later.

During driver init, x86_package_temp and all int340x drivers sets RW trip
temperature as 0. This results in all these trips marked as invalid by
the thermal core.

To fix this initialize RW trips to THERMAL_TEMP_INVALID instead of 0.

Cc: <stable@vger.kernel.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210430122343.1789899-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thermal/core/fair share: Lock the thermal zone while looping over instances 2021-05-19T08:08:32+00:00 Lukasz Luba lukasz.luba@arm.com 2021-04-22T15:36:22+00:00 7a474350d8de37223ad277dd74f7082b9643491e commit fef05776eb02238dcad8d5514e666a42572c3f32 upstream. The tz->lock must be hold during the looping over the instances in that thermal zone. This lock was missing in the governor code since the beginning, so it's hard to point into a particular commit. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422153624.6074-2-lukasz.luba@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fef05776eb02238dcad8d5514e666a42572c3f32 upstream.

The tz->lock must be hold during the looping over the instances in that
thermal zone. This lock was missing in the governor code since the
beginning, so it's hard to point into a particular commit.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210422153624.6074-2-lukasz.luba@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thermal: thermal_of: Fix error return code of thermal_of_populate_bind_params() 2021-05-19T08:08:24+00:00 Jia-Ju Bai baijiaju1990@gmail.com 2021-03-10T12:24:23+00:00 f49f00dbe3d0b4bd9cb39925ada33709f552fc73 [ Upstream commit 45c7eaeb29d67224db4ba935deb575586a1fda09 ] When kcalloc() returns NULL to __tcbp or of_count_phandle_with_args() returns zero or -ENOENT to count, no error return code of thermal_of_populate_bind_params() is assigned. To fix these bugs, ret is assigned with -ENOMEM and -ENOENT in these cases, respectively. Fixes: a92bab8919e3 ("of: thermal: Allow multiple devices to share cooling map") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210310122423.3266-1-baijiaju1990@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 45c7eaeb29d67224db4ba935deb575586a1fda09 ]

When kcalloc() returns NULL to __tcbp or of_count_phandle_with_args()
returns zero or -ENOENT to count, no error return code of
thermal_of_populate_bind_params() is assigned.
To fix these bugs, ret is assigned with -ENOMEM and -ENOENT in these
cases, respectively.

Fixes: a92bab8919e3 ("of: thermal: Allow multiple devices to share cooling map")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210310122423.3266-1-baijiaju1990@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
thermal/core: Add NULL pointer check before using cooling device stats 2021-04-07T12:47:40+00:00 Manaf Meethalavalappu Pallikunhi manafm@codeaurora.org 2020-12-07T18:53:01+00:00 84bd602c14b76be153fffbf2c21b27a25b55dcfe [ Upstream commit 2046a24ae121cd107929655a6aaf3b8c5beea01f ] There is a possible chance that some cooling device stats buffer allocation fails due to very high cooling device max state value. Later cooling device update sysfs can try to access stats data for the same cooling device. It will lead to NULL pointer dereference issue. Add a NULL pointer check before accessing thermal cooling device stats data. It fixes the following bug [ 26.812833] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 27.122960] Call trace: [ 27.122963] do_raw_spin_lock+0x18/0xe8 [ 27.122966] _raw_spin_lock+0x24/0x30 [ 27.128157] thermal_cooling_device_stats_update+0x24/0x98 [ 27.128162] cur_state_store+0x88/0xb8 [ 27.128166] dev_attr_store+0x40/0x58 [ 27.128169] sysfs_kf_write+0x50/0x68 [ 27.133358] kernfs_fop_write+0x12c/0x1c8 [ 27.133362] __vfs_write+0x54/0x160 [ 27.152297] vfs_write+0xcc/0x188 [ 27.157132] ksys_write+0x78/0x108 [ 27.162050] ksys_write+0xf8/0x108 [ 27.166968] __arm_smccc_hvc+0x158/0x4b0 [ 27.166973] __arm_smccc_hvc+0x9c/0x4b0 [ 27.186005] el0_svc+0x8/0xc Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1607367181-24589-1-git-send-email-manafm@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2046a24ae121cd107929655a6aaf3b8c5beea01f ]

There is a possible chance that some cooling device stats buffer
allocation fails due to very high cooling device max state value.
Later cooling device update sysfs can try to access stats data
for the same cooling device. It will lead to NULL pointer
dereference issue.

Add a NULL pointer check before accessing thermal cooling device
stats data. It fixes the following bug

[ 26.812833] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[ 27.122960] Call trace:
[ 27.122963] do_raw_spin_lock+0x18/0xe8
[ 27.122966] _raw_spin_lock+0x24/0x30
[ 27.128157] thermal_cooling_device_stats_update+0x24/0x98
[ 27.128162] cur_state_store+0x88/0xb8
[ 27.128166] dev_attr_store+0x40/0x58
[ 27.128169] sysfs_kf_write+0x50/0x68
[ 27.133358] kernfs_fop_write+0x12c/0x1c8
[ 27.133362] __vfs_write+0x54/0x160
[ 27.152297] vfs_write+0xcc/0x188
[ 27.157132] ksys_write+0x78/0x108
[ 27.162050] ksys_write+0xf8/0x108
[ 27.166968] __arm_smccc_hvc+0x158/0x4b0
[ 27.166973] __arm_smccc_hvc+0x9c/0x4b0
[ 27.186005] el0_svc+0x8/0xc

Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1607367181-24589-1-git-send-email-manafm@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>