commit 163b00cde7cf2206e248789d2780121ad5e6a70b upstream.
1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone
device") changed cancel_delayed_work to cancel_delayed_work_sync to avoid
a use-after-free issue. However, cancel_delayed_work_sync could be called
insides the WQ causing deadlock.
[54109.642398] c0 1162 kworker/u17:1 D 0 11030 2 0x00000000
[54109.642437] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check
[54109.642447] c0 1162 Call trace:
[54109.642456] c0 1162 __switch_to+0x138/0x158
[54109.642467] c0 1162 __schedule+0xba4/0x1434
[54109.642480] c0 1162 schedule_timeout+0xa0/0xb28
[54109.642492] c0 1162 wait_for_common+0x138/0x2e8
[54109.642511] c0 1162 flush_work+0x348/0x40c
[54109.642522] c0 1162 __cancel_work_timer+0x180/0x218
[54109.642544] c0 1162 handle_thermal_trip+0x2c4/0x5a4
[54109.642553] c0 1162 thermal_zone_device_update+0x1b4/0x25c
[54109.642563] c0 1162 thermal_zone_device_check+0x18/0x24
[54109.642574] c0 1162 process_one_work+0x3cc/0x69c
[54109.642583] c0 1162 worker_thread+0x49c/0x7c0
[54109.642593] c0 1162 kthread+0x17c/0x1b0
[54109.642602] c0 1162 ret_from_fork+0x10/0x18
[54109.643051] c0 1162 kworker/u17:2 D 0 16245 2 0x00000000
[54109.643067] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check
[54109.643077] c0 1162 Call trace:
[54109.643085] c0 1162 __switch_to+0x138/0x158
[54109.643095] c0 1162 __schedule+0xba4/0x1434
[54109.643104] c0 1162 schedule_timeout+0xa0/0xb28
[54109.643114] c0 1162 wait_for_common+0x138/0x2e8
[54109.643122] c0 1162 flush_work+0x348/0x40c
[54109.643131] c0 1162 __cancel_work_timer+0x180/0x218
[54109.643141] c0 1162 handle_thermal_trip+0x2c4/0x5a4
[54109.643150] c0 1162 thermal_zone_device_update+0x1b4/0x25c
[54109.643159] c0 1162 thermal_zone_device_check+0x18/0x24
[54109.643167] c0 1162 process_one_work+0x3cc/0x69c
[54109.643177] c0 1162 worker_thread+0x49c/0x7c0
[54109.643186] c0 1162 kthread+0x17c/0x1b0
[54109.643195] c0 1162 ret_from_fork+0x10/0x18
[54109.644500] c0 1162 cat D 0 7766 1 0x00000001
[54109.644515] c0 1162 Call trace:
[54109.644524] c0 1162 __switch_to+0x138/0x158
[54109.644536] c0 1162 __schedule+0xba4/0x1434
[54109.644546] c0 1162 schedule_preempt_disabled+0x80/0xb0
[54109.644555] c0 1162 __mutex_lock+0x3a8/0x7f0
[54109.644563] c0 1162 __mutex_lock_slowpath+0x14/0x20
[54109.644575] c0 1162 thermal_zone_get_temp+0x84/0x360
[54109.644586] c0 1162 temp_show+0x30/0x78
[54109.644609] c0 1162 dev_attr_show+0x5c/0xf0
[54109.644628] c0 1162 sysfs_kf_seq_show+0xcc/0x1a4
[54109.644636] c0 1162 kernfs_seq_show+0x48/0x88
[54109.644656] c0 1162 seq_read+0x1f4/0x73c
[54109.644664] c0 1162 kernfs_fop_read+0x84/0x318
[54109.644683] c0 1162 __vfs_read+0x50/0x1bc
[54109.644692] c0 1162 vfs_read+0xa4/0x140
[54109.644701] c0 1162 SyS_read+0xbc/0x144
[54109.644708] c0 1162 el0_svc_naked+0x34/0x38
[54109.845800] c0 1162 D 720.000s 1->7766->7766 cat [panic]
Fixes: 1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone device")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Wang <wvw@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3a31386217628ffe2491695be2db933c25dde785 ]
On r8a7791/koelsch, sometimes the following message is printed during
system suspend:
rcar_thermal e61f0000.thermal: thermal sensor was broken
This happens if the workqueue runs while the device is already
suspended. Fix this by using the freezable system workqueue instead,
cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from happening
during system suspend").
Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1851799e1d2978f68eea5d9dff322e121dcf59c1 ]
thermal_zone_device_unregister() cancels the delayed work that polls the
thermal zone, but it does not wait for it to finish. This is racy with
respect to the freeing of the thermal zone device, which can result in a
use-after-free [1].
Fix this by waiting for the delayed work to finish before freeing the
thermal zone device. Note that thermal_zone_device_set_polling() is
never invoked from an atomic context, so it is safe to call
cancel_delayed_work_sync() that can block.
[1]
[ +0.002221] ==================================================================
[ +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0
[ +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17
[ +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701
[ +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check
[ +0.000012] Call Trace:
[ +0.000021] dump_stack+0xa9/0x10e
[ +0.000020] print_address_description.cold.2+0x9/0x25e
[ +0.000018] __kasan_report.cold.3+0x78/0x9d
[ +0.000016] kasan_report+0xe/0x20
[ +0.000016] __mutex_lock+0x1076/0x11c0
[ +0.000014] step_wise_throttle+0x72/0x150
[ +0.000018] handle_thermal_trip+0x167/0x760
[ +0.000019] thermal_zone_device_update+0x19e/0x5f0
[ +0.000019] process_one_work+0x969/0x16f0
[ +0.000017] worker_thread+0x91/0xc40
[ +0.000014] kthread+0x33d/0x400
[ +0.000015] ret_from_fork+0x3a/0x50
[ +0.000020] Allocated by task 1:
[ +0.000015] save_stack+0x19/0x80
[ +0.000015] __kasan_kmalloc.constprop.4+0xc1/0xd0
[ +0.000014] kmem_cache_alloc_trace+0x152/0x320
[ +0.000015] thermal_zone_device_register+0x1b4/0x13a0
[ +0.000015] mlxsw_thermal_init+0xc92/0x23d0
[ +0.000014] __mlxsw_core_bus_device_register+0x659/0x11b0
[ +0.000013] mlxsw_core_bus_device_register+0x3d/0x90
[ +0.000013] mlxsw_pci_probe+0x355/0x4b0
[ +0.000014] local_pci_probe+0xc3/0x150
[ +0.000013] pci_device_probe+0x280/0x410
[ +0.000013] really_probe+0x26a/0xbb0
[ +0.000013] driver_probe_device+0x208/0x2e0
[ +0.000013] device_driver_attach+0xfe/0x140
[ +0.000013] __driver_attach+0x110/0x310
[ +0.000013] bus_for_each_dev+0x14b/0x1d0
[ +0.000013] driver_register+0x1c0/0x400
[ +0.000015] mlxsw_sp_module_init+0x5d/0xd3
[ +0.000014] do_one_initcall+0x239/0x4dd
[ +0.000013] kernel_init_freeable+0x42b/0x4e8
[ +0.000012] kernel_init+0x11/0x18b
[ +0.000013] ret_from_fork+0x3a/0x50
[ +0.000015] Freed by task 581:
[ +0.000013] save_stack+0x19/0x80
[ +0.000014] __kasan_slab_free+0x125/0x170
[ +0.000013] kfree+0xf3/0x310
[ +0.000013] thermal_release+0xc7/0xf0
[ +0.000014] device_release+0x77/0x200
[ +0.000014] kobject_put+0x1a8/0x4c0
[ +0.000014] device_unregister+0x38/0xc0
[ +0.000014] thermal_zone_device_unregister+0x54e/0x6a0
[ +0.000014] mlxsw_thermal_fini+0x184/0x35a
[ +0.000014] mlxsw_core_bus_device_unregister+0x10a/0x640
[ +0.000013] mlxsw_devlink_core_bus_device_reload+0x92/0x210
[ +0.000015] devlink_nl_cmd_reload+0x113/0x1f0
[ +0.000014] genl_family_rcv_msg+0x700/0xee0
[ +0.000013] genl_rcv_msg+0xca/0x170
[ +0.000013] netlink_rcv_skb+0x137/0x3a0
[ +0.000012] genl_rcv+0x29/0x40
[ +0.000013] netlink_unicast+0x49b/0x660
[ +0.000013] netlink_sendmsg+0x755/0xc90
[ +0.000013] __sys_sendto+0x3de/0x430
[ +0.000013] __x64_sys_sendto+0xe2/0x1b0
[ +0.000013] do_syscall_64+0xa4/0x4d0
[ +0.000013] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ +0.000017] The buggy address belongs to the object at ffff8881e48e0008
which belongs to the cache kmalloc-2k of size 2048
[ +0.000012] The buggy address is located 1096 bytes inside of
2048-byte region [ffff8881e48e0008, ffff8881e48e0808)
[ +0.000007] The buggy address belongs to the page:
[ +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0
[ +0.000020] flags: 0x200000000010200(slab|head)
[ +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0
[ +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ +0.000007] page dumped because: kasan: bad access detected
[ +0.000012] Memory state around the buggy address:
[ +0.000012] ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000008] ^
[ +0.000012] ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ==================================================================
Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer")
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc7d18cf6a923cde7f5e7ba2c1105bb106d3e29a ] We print a calibration failure message on -EPROBE_DEFER from nvmem/qfprom as follows: [ 3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4 [ 3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed [ 3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4 This confuses people when, in fact, calibration succeeds later when nvmem/qfprom device is available. Don't print this message on a -EPROBE_DEFER. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63f55fcea50c25ae5ad45af92d08dae3b84534c2 ] Currently IRQ remains enabled after .remove, later if device is probed, IRQ is requested before .thermal_init, this may cause IRQ function be called before device is initialized. this patch disables interrupt in .remove, to ensure irq function only be called after device is fully initialized. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f2c4db1bd80720cd8cb2a5aa220d9bc9f374f04e upstream
Going primarily by:
https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors
with additional information gleaned from other related pages; notably:
- Bonnell shrink was called Saltwell
- Moorefield is the Merriefield refresh which makes it Airmont
The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE
for i in `git grep -l FAM6_ATOM` ; do
sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \
-e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \
-e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \
-e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \
-e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \
-e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \
-e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \
-e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \
-e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \
-e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \
-e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i}
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: dave.hansen@linux.intel.com
Cc: len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e925b5be5751f6a7286bbd9a4cbbc4ac90cc5fa6 ] kthread name only allows 15 characters (TASK_COMMON_LEN is 16). Thus rename the kthreads created by intel_powerclamp driver from "kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid" to avoid truncated kthead name for cpu 100 and later. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 396ee4d0cd52c13b3f6421b8d324d65da5e7e409 ] int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction. Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16fc8eca1975358111dbd7ce65e4ce42d1a848fb ] Add more supported DPTF policies than the driver currently exposes. Signed-off-by: Matthew Garrett <mjg59@google.com> Cc: Nisha Aram <nisha.aram@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35122495a8c6683e863acf7b05a7036b2be64c7a ]
"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer
dereference in bcm2835_thermal_debugfs. The driver makes use of the
implementation details of the thermal framework to retrieve a pointer
to its private data from a struct thermal_zone_device, and gets it
wrong - leading to the crash. Instead, store its private data as the
drvdata and retrieve the thermal_zone_device pointer from it.
Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>