linux-stable.git/drivers/thermal, branch linux-4.9.y Linux kernel stable tree thermal: intel_powerclamp: Use first online CPU as control_cpu 2022-10-26T11:15:48+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2022-10-13T12:50:28+00:00 a83ed01f2f5baa68d403bc7fdfe3d8463a25796d commit 4bb7f6c2781e46fc5bd00475a66df2ea30ef330d upstream. Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash") fixed an issue related to using smp_processor_id() in preemptible context by replacing it with a pair of get_cpu()/put_cpu(), but what is needed there really is any online CPU and not necessarily the one currently running the code. Arguably, getting the one that's running the code in there is confusing. For this reason, simply give the control CPU role to the first online one which automatically will be CPU0 if it is online, so one check can be dropped from the code for an added benefit. Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/ Fixes: 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4bb7f6c2781e46fc5bd00475a66df2ea30ef330d upstream.

Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead
of smp_processor_id() to avoid crash") fixed an issue related to using
smp_processor_id() in preemptible context by replacing it with a pair
of get_cpu()/put_cpu(), but what is needed there really is any online
CPU and not necessarily the one currently running the code.  Arguably,
getting the one that's running the code in there is confusing.

For this reason, simply give the control CPU role to the first online
one which automatically will be CPU0 if it is online, so one check
can be dropped from the code for an added benefit.

Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/
Fixes: 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash 2022-10-26T11:15:45+00:00 Srinivas Pandruvada srinivas.pandruvada@linux.intel.com 2022-09-20T11:06:57+00:00 3e799e815097febbcb81b472285be824f5d089f9 [ Upstream commit 68b99e94a4a2db6ba9b31fe0485e057b9354a640 ] When CPU 0 is offline and intel_powerclamp is used to inject idle, it generates kernel BUG: BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687 caller is debug_smp_processor_id+0x17/0x20 CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 check_preemption_disabled+0xdd/0xe0 debug_smp_processor_id+0x17/0x20 powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp] ... ... Here CPU 0 is the control CPU by default and changed to the current CPU, if CPU 0 offlined. This check has to be performed under cpus_read_lock(), hence the above warning. Use get_cpu() instead of smp_processor_id() to avoid this BUG. Suggested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 68b99e94a4a2db6ba9b31fe0485e057b9354a640 ]

When CPU 0 is offline and intel_powerclamp is used to inject
idle, it generates kernel BUG:

BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687
caller is debug_smp_processor_id+0x17/0x20
CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
check_preemption_disabled+0xdd/0xe0
debug_smp_processor_id+0x17/0x20
powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp]
...
...

Here CPU 0 is the control CPU by default and changed to the current CPU,
if CPU 0 offlined. This check has to be performed under cpus_read_lock(),
hence the above warning.

Use get_cpu() instead of smp_processor_id() to avoid this BUG.

Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
thermal: int340x: Increase bitmap size 2022-04-20T07:06:30+00:00 Srinivas Pandruvada srinivas.pandruvada@linux.intel.com 2022-03-14T22:08:55+00:00 1c91fa481686c918abc03b8bb3533859d8ddfa9c commit 668f69a5f863b877bc3ae129efe9a80b6f055141 upstream. The number of policies are 10, so can't be supported by the bitmap size of u8. Even though there are no platfoms with these many policies, but for correctness increase to u32. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: 16fc8eca1975 ("thermal/int340x_thermal: Add additional UUIDs") Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 668f69a5f863b877bc3ae129efe9a80b6f055141 upstream.

The number of policies are 10, so can't be supported by the bitmap size
of u8.

Even though there are no platfoms with these many policies, but
for correctness increase to u32.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 16fc8eca1975 ("thermal/int340x_thermal: Add additional UUIDs")
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thermal: core: Reset previous low and high trip during thermal zone init 2021-12-08T07:45:05+00:00 Manaf Meethalavalappu Pallikunhi manafm@codeaurora.org 2021-11-02T20:00:40+00:00 551105df6fd5c3a5cb37a863a1b19066cbdaafad [ Upstream commit 99b63316c39988039965693f5f43d8b4ccb1c86c ] During the suspend is in process, thermal_zone_device_update bails out thermal zone re-evaluation for any sensor trip violation without setting next valid trip to that sensor. It assumes during resume it will re-evaluate same thermal zone and update trip. But when it is in suspend temperature goes down and on resume path while updating thermal zone if temperature is less than previously violated trip, thermal zone set trip function evaluates the same previous high and previous low trip as new high and low trip. Since there is no change in high/low trip, it bails out from thermal zone set trip API without setting any trip. It leads to a case where sensor high trip or low trip is disabled forever even though thermal zone has a valid high or low trip. During thermal zone device init, reset thermal zone previous high and low trip. It resolves above mentioned scenario. Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99b63316c39988039965693f5f43d8b4ccb1c86c ]

During the suspend is in process, thermal_zone_device_update bails out
thermal zone re-evaluation for any sensor trip violation without
setting next valid trip to that sensor. It assumes during resume
it will re-evaluate same thermal zone and update trip. But when it is
in suspend temperature goes down and on resume path while updating
thermal zone if temperature is less than previously violated trip,
thermal zone set trip function evaluates the same previous high and
previous low trip as new high and low trip. Since there is no change
in high/low trip, it bails out from thermal zone set trip API without
setting any trip. It leads to a case where sensor high trip or low
trip is disabled forever even though thermal zone has a valid high
or low trip.

During thermal zone device init, reset thermal zone previous high
and low trip. It resolves above mentioned scenario.

Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe() 2021-09-26T11:36:18+00:00 Dan Carpenter dan.carpenter@oracle.com 2021-08-10T08:44:13+00:00 fa9e6fc74daf369c87b6b9b39e72020b1fc0be10 commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream. This error path return success but it should propagate the negative error code from devm_clk_get(). Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210810084413.GA23810@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream.

This error path return success but it should propagate the negative
error code from devm_clk_get().

Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210810084413.GA23810@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thermal/core: Correct function name thermal_zone_device_unregister() 2021-07-28T07:14:25+00:00 Yang Yingliang yangyingliang@huawei.com 2021-05-17T05:10:20+00:00 092f2c474fe14474874cb3a9d6ec4426df0fd6b6 [ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ] Fix the following make W=1 kernel build warning: drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ]

Fix the following make W=1 kernel build warning:

  drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
thermal/core/fair share: Lock the thermal zone while looping over instances 2021-05-22T08:40:33+00:00 Lukasz Luba lukasz.luba@arm.com 2021-04-22T15:36:22+00:00 2da11226aaa95484ab9df2485ce50bb141bb11b6 commit fef05776eb02238dcad8d5514e666a42572c3f32 upstream. The tz->lock must be hold during the looping over the instances in that thermal zone. This lock was missing in the governor code since the beginning, so it's hard to point into a particular commit. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422153624.6074-2-lukasz.luba@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fef05776eb02238dcad8d5514e666a42572c3f32 upstream.

The tz->lock must be hold during the looping over the instances in that
thermal zone. This lock was missing in the governor code since the
beginning, so it's hard to point into a particular commit.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210422153624.6074-2-lukasz.luba@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430 2020-09-12T09:47:34+00:00 Tony Lindgren tony@atomide.com 2020-07-06T18:33:38+00:00 2e4a2bac24b8fd3ad95c152d911831e120f79b96 [ Upstream commit 30d24faba0532d6972df79a1bf060601994b5873 ] We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 30d24faba0532d6972df79a1bf060601994b5873 ]

We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:

thermal thermal_zone0: critical temperature reached (143 C), shutting down

Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.

Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.

Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.

Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.

Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "thermal: mediatek: fix register index error" 2020-07-22T07:10:51+00:00 Enric Balletbo i Serra enric.balletbo@collabora.com 2020-07-07T10:34:12+00:00 5e48553597df05065bde5d1ce19bf35911ee038b [ Upstream commit a8f62f183021be389561570ab5f8c701a5e70298 ] This reverts commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 The above patch is supposed to fix a register index error on mt2701. It is not clear if the problem solved is a hang or just an invalid value returned, my guess is the second. The patch introduces, though, a new hang on MT8173 device making them unusable. So, seems reasonable, revert the patch because introduces a worst issue. The reason I send a revert instead of trying to fix the issue for MT8173 is because the information needed to fix the issue is in the datasheet and is not public. So I am not really able to fix it. Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173 devices. [ 2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001 [ 2.230421] Mem abort info: [ 2.233207] ESR = 0x96000021 [ 2.236261] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.241571] SET = 0, FnV = 0 [ 2.244623] EA = 0, S1PTW = 0 [ 2.247762] Data abort info: [ 2.250640] ISV = 0, ISS = 0x00000021 [ 2.254473] CM = 0, WnR = 0 [ 2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000 [ 2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707 [ 2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP [ 2.280432] Modules linked in: [ 2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162 [ 2.289914] Hardware name: Google Elm (DT) [ 2.294003] pstate: 20000005 (nzCv daif -PAN -UAO) [ 2.298792] pc : mtk_read_temp+0xb8/0x1c8 [ 2.302793] lr : mtk_read_temp+0x7c/0x1c8 [ 2.306794] sp : ffff80001003b930 [ 2.310100] x29: ffff80001003b930 x28: 0000000000000000 [ 2.315404] x27: 0000000000000002 x26: ffff0000f9550b10 [ 2.320709] x25: ffff0000f9550a80 x24: 0000000000000090 [ 2.326014] x23: ffff80001003ba24 x22: 00000000610344c0 [ 2.331318] x21: 0000000000002710 x20: 00000000000001f4 [ 2.336622] x19: 0000000000030d40 x18: ffff800011742ec0 [ 2.341926] x17: 0000000000000001 x16: 0000000000000001 [ 2.347230] x15: ffffffffffffffff x14: ffffff0000000000 [ 2.352535] x13: ffffffffffffffff x12: 0000000000000028 [ 2.357839] x11: 0000000000000003 x10: ffff800011295ec8 [ 2.363143] x9 : 000000000000291b x8 : 0000000000000002 [ 2.368447] x7 : 00000000000000a8 x6 : 0000000000000004 [ 2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0 [ 2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001 [ 2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80 [ 2.389665] Call trace: [ 2.392105] mtk_read_temp+0xb8/0x1c8 [ 2.395760] of_thermal_get_temp+0x2c/0x40 [ 2.399849] thermal_zone_get_temp+0x78/0x160 [ 2.404198] thermal_zone_device_update.part.0+0x3c/0x1f8 [ 2.409589] thermal_zone_device_update+0x34/0x48 [ 2.414286] of_thermal_set_mode+0x58/0x88 [ 2.418375] thermal_zone_of_sensor_register+0x1a8/0x1d8 [ 2.423679] devm_thermal_zone_of_sensor_register+0x64/0xb0 [ 2.429242] mtk_thermal_probe+0x690/0x7d0 [ 2.433333] platform_drv_probe+0x5c/0xb0 [ 2.437335] really_probe+0xe4/0x448 [ 2.440901] driver_probe_device+0xe8/0x140 [ 2.445077] device_driver_attach+0x7c/0x88 [ 2.449252] __driver_attach+0xac/0x178 [ 2.453082] bus_for_each_dev+0x78/0xc8 [ 2.456909] driver_attach+0x2c/0x38 [ 2.460476] bus_add_driver+0x14c/0x230 [ 2.464304] driver_register+0x6c/0x128 [ 2.468131] __platform_driver_register+0x50/0x60 [ 2.472831] mtk_thermal_driver_init+0x24/0x30 [ 2.477268] do_one_initcall+0x50/0x298 [ 2.481098] kernel_init_freeable+0x1ec/0x264 [ 2.485450] kernel_init+0x1c/0x110 [ 2.488931] ret_from_fork+0x10/0x1c [ 2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042) [ 2.498599] ---[ end trace e43e3105ed27dc99 ]--- [ 2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.511020] SMP: stopping secondary CPUs [ 2.514941] Kernel Offset: disabled [ 2.518421] CPU features: 0x090002,25006005 [ 2.522595] Memory Limit: none [ 2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]-- Cc: Michael Kao <michael.kao@mediatek.com> Fixes: eb9aecd90d1a ("thermal: mediatek: fix register index error") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a8f62f183021be389561570ab5f8c701a5e70298 ]

This reverts commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6

The above patch is supposed to fix a register index error on mt2701. It
is not clear if the problem solved is a hang or just an invalid value
returned, my guess is the second. The patch introduces, though, a new
hang on MT8173 device making them unusable. So, seems reasonable, revert
the patch because introduces a worst issue.

The reason I send a revert instead of trying to fix the issue for MT8173
is because the information needed to fix the issue is in the datasheet
and is not public. So I am not really able to fix it.

Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173
devices.

[    2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001
[    2.230421] Mem abort info:
[    2.233207]   ESR = 0x96000021
[    2.236261]   EC = 0x25: DABT (current EL), IL = 32 bits
[    2.241571]   SET = 0, FnV = 0
[    2.244623]   EA = 0, S1PTW = 0
[    2.247762] Data abort info:
[    2.250640]   ISV = 0, ISS = 0x00000021
[    2.254473]   CM = 0, WnR = 0
[    2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000
[    2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707
[    2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[    2.280432] Modules linked in:
[    2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162
[    2.289914] Hardware name: Google Elm (DT)
[    2.294003] pstate: 20000005 (nzCv daif -PAN -UAO)
[    2.298792] pc : mtk_read_temp+0xb8/0x1c8
[    2.302793] lr : mtk_read_temp+0x7c/0x1c8
[    2.306794] sp : ffff80001003b930
[    2.310100] x29: ffff80001003b930 x28: 0000000000000000
[    2.315404] x27: 0000000000000002 x26: ffff0000f9550b10
[    2.320709] x25: ffff0000f9550a80 x24: 0000000000000090
[    2.326014] x23: ffff80001003ba24 x22: 00000000610344c0
[    2.331318] x21: 0000000000002710 x20: 00000000000001f4
[    2.336622] x19: 0000000000030d40 x18: ffff800011742ec0
[    2.341926] x17: 0000000000000001 x16: 0000000000000001
[    2.347230] x15: ffffffffffffffff x14: ffffff0000000000
[    2.352535] x13: ffffffffffffffff x12: 0000000000000028
[    2.357839] x11: 0000000000000003 x10: ffff800011295ec8
[    2.363143] x9 : 000000000000291b x8 : 0000000000000002
[    2.368447] x7 : 00000000000000a8 x6 : 0000000000000004
[    2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0
[    2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001
[    2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80
[    2.389665] Call trace:
[    2.392105]  mtk_read_temp+0xb8/0x1c8
[    2.395760]  of_thermal_get_temp+0x2c/0x40
[    2.399849]  thermal_zone_get_temp+0x78/0x160
[    2.404198]  thermal_zone_device_update.part.0+0x3c/0x1f8
[    2.409589]  thermal_zone_device_update+0x34/0x48
[    2.414286]  of_thermal_set_mode+0x58/0x88
[    2.418375]  thermal_zone_of_sensor_register+0x1a8/0x1d8
[    2.423679]  devm_thermal_zone_of_sensor_register+0x64/0xb0
[    2.429242]  mtk_thermal_probe+0x690/0x7d0
[    2.433333]  platform_drv_probe+0x5c/0xb0
[    2.437335]  really_probe+0xe4/0x448
[    2.440901]  driver_probe_device+0xe8/0x140
[    2.445077]  device_driver_attach+0x7c/0x88
[    2.449252]  __driver_attach+0xac/0x178
[    2.453082]  bus_for_each_dev+0x78/0xc8
[    2.456909]  driver_attach+0x2c/0x38
[    2.460476]  bus_add_driver+0x14c/0x230
[    2.464304]  driver_register+0x6c/0x128
[    2.468131]  __platform_driver_register+0x50/0x60
[    2.472831]  mtk_thermal_driver_init+0x24/0x30
[    2.477268]  do_one_initcall+0x50/0x298
[    2.481098]  kernel_init_freeable+0x1ec/0x264
[    2.485450]  kernel_init+0x1c/0x110
[    2.488931]  ret_from_fork+0x10/0x1c
[    2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042)
[    2.498599] ---[ end trace e43e3105ed27dc99 ]---
[    2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    2.511020] SMP: stopping secondary CPUs
[    2.514941] Kernel Offset: disabled
[    2.518421] CPU features: 0x090002,25006005
[    2.522595] Memory Limit: none
[    2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--

Cc: Michael Kao <michael.kao@mediatek.com>
Fixes: eb9aecd90d1a ("thermal: mediatek: fix register index error")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power 2020-01-29T09:24:24+00:00 Matthias Kaehlcke mka@chromium.org 2019-05-02T18:32:38+00:00 56fc3de955b5000a4a0d884774c897e7ba5ba8f0 [ Upstream commit bf45ac18b78038e43af3c1a273cae4ab5704d2ce ] The CPU load values passed to the thermal_power_cpu_get_power tracepoint are zero for all CPUs, unless, unless the thermal_power_cpu_limit tracepoint is enabled too: irq/41-rockchip-98 [000] .... 290.972410: thermal_power_cpu_get_power: cpus=0000000f freq=1800000 load={{0x0,0x0,0x0,0x0}} dynamic_power=4815 vs irq/41-rockchip-96 [000] .... 95.773585: thermal_power_cpu_get_power: cpus=0000000f freq=1800000 load={{0x56,0x64,0x64,0x5e}} dynamic_power=4959 irq/41-rockchip-96 [000] .... 95.773596: thermal_power_cpu_limit: cpus=0000000f freq=408000 cdev_state=10 power=416 There seems to be no good reason for omitting the CPU load information depending on another tracepoint. My guess is that the intention was to check whether thermal_power_cpu_get_power is (still) enabled, however 'load_cpu != NULL' already indicates that it was at least enabled when cpufreq_get_requested_power() was entered, there seems little gain from omitting the assignment if the tracepoint was just disabled, so just remove the check. Fixes: 6828a4711f99 ("thermal: add trace events to the power allocator governor") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Javi Merino <javi.merino@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bf45ac18b78038e43af3c1a273cae4ab5704d2ce ]

The CPU load values passed to the thermal_power_cpu_get_power
tracepoint are zero for all CPUs, unless, unless the
thermal_power_cpu_limit tracepoint is enabled too:

  irq/41-rockchip-98    [000] ....   290.972410: thermal_power_cpu_get_power:
  cpus=0000000f freq=1800000 load={{0x0,0x0,0x0,0x0}} dynamic_power=4815

vs

  irq/41-rockchip-96    [000] ....    95.773585: thermal_power_cpu_get_power:
  cpus=0000000f freq=1800000 load={{0x56,0x64,0x64,0x5e}} dynamic_power=4959
  irq/41-rockchip-96    [000] ....    95.773596: thermal_power_cpu_limit:
  cpus=0000000f freq=408000 cdev_state=10 power=416

There seems to be no good reason for omitting the CPU load information
depending on another tracepoint. My guess is that the intention was to
check whether thermal_power_cpu_get_power is (still) enabled, however
'load_cpu != NULL' already indicates that it was at least enabled when
cpufreq_get_requested_power() was entered, there seems little gain
from omitting the assignment if the tracepoint was just disabled, so
just remove the check.

Fixes: 6828a4711f99 ("thermal: add trace events to the power allocator governor")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Javi Merino <javi.merino@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>