Pull thermal fixes from Zhang Rui:
 "Specifics:

   - bogus type qualifier fix in OF thermal code.
   - Minor fixes on imx and rcar thermal drivers.
   - Update TI SoC thermal maintainer entry.
   - Updated documentation of OF cpufreq cooling register"

* 'thermal-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/
  thermal: rcar: change type of ctemp in rcar_thermal_update_temp()
  thermal: rcar: fix ENR register value
  Documentation: thermal: document of_cpufreq_cooling_register()
  Thermal: imx: add clk disable/enable for suspend/resume
  MAINTAINERS: update ti-soc-thermal status
  MAINTAINERS: Add linux-omap to list of reviewers for TI Thermal
  thermal: of: Remove bogus type qualifier for of_thermal_get_trip_points()

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Since the ctemp is used for rcar_thermal_write() in
rcar_thermal_update_temp(), the type of 'ctemp' should be "u32" instead
of "int". This patch also changes type of the helper variables 'old'
and 'new'.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

On R-Mobile APE6, since it has 3 thermal zones, ENR register
has enable bits in bit 19-16, bit 11-8 and bit 3-0.

However, on R-Car gen2, since it has 1 thermal zone, ENR register has
enable bits in bit 3-0. (In other words, the write value should always
be 0 for bit 31-4 of ENR register.)

So, this patch fixes the ENR register value using I/O resource sets.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Thermal sensor's clk is from pll3_usb_otg, per hardware
design requirement, need to make sure pll3_usb_otg is disabled
before STOP mode is entered, otherwise, all PFDs under it may
enter incorrect state, this patch disables pll3_usb_otg before
suspend and enables it after resume.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

 there is no ACPI device object

processor_thermal_device driver needs ACPI support to work. Thus, the driver
probing should fail when there is no ACPI device object asscociated.

This fixes a NULL pointer dereference when the driver is loaded
with INT340X feature disabled in BIOS.

Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>

For some INT340X thermal devices, even if they are not referred in
_TRT/_ART table, they still can be used by userspace for thermal control.
Thus change the code to enumerated all the INT340X devices,
no matter if they're referred in _TRT/_ART or not.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

With gcc 4.1.2, 4.2, and 4.2.4 (4.4 and later are OK):

drivers/thermal/thermal_core.h:110: warning: type qualifiers ignored on function return type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: ce8be7785922de0e ("thermal: of: Extend of-thermal to export table of trip points")
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Remove acpi notification handler when zone is removed.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>