linux-stable.git/drivers/thermal/qcom, branch v6.2.2 Linux kernel stable tree thermal/drivers/qcom/lmh: Fix irq handler return value 2022-12-14T14:25:41+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2022-03-16T18:03:22+00:00 46a891e45be97c6781ac34f5ec777d69370e252b After enough invocations the LMh irq is eventually reported as bad, because the handler doesn't return IRQ_HANDLED, fix this. Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220316180322.88132-1-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> 
After enough invocations the LMh irq is eventually reported as bad, because the
handler doesn't return IRQ_HANDLED, fix this.

Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220316180322.88132-1-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
thermal/drivers/qcom: Demote error log of thermal zone register to debug 2022-12-14T14:25:40+00:00 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org 2022-10-29T05:29:33+00:00 2baad2496383c6036bdb0945ef8aa6b1a5d18c19 devm_thermal_of_zone_register() can fail with -ENODEV if thermal zone for the channel is not represented in DT. This is perfectly fine since not all sensors needs to be used for thermal zones but only a few in real world. So demote the error log to debug to avoid spamming users. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20221029052933.32421-1-manivannan.sadhasivam@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> 
devm_thermal_of_zone_register() can fail with -ENODEV if thermal zone for
the channel is not represented in DT. This is perfectly fine since not all
sensors needs to be used for thermal zones but only a few in real world.

So demote the error log to debug to avoid spamming users.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20221029052933.32421-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2 2022-12-14T14:25:40+00:00 Luca Weiss luca.weiss@fairphone.com 2022-10-20T14:52:37+00:00 8763f8acbf8aef22a2321d4c978cd078aa3b8f64 On gen2 chips the stage2 threshold is not 140 degC but 125 degC. Make the warning message clearer by using this variable and also by including the temperature that was checked for. Fixes: aa92b3310c55 ("thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC peripherals") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Amit Kucheria <amitk@kernel.org> Link: https://lore.kernel.org/r/20221020145237.942146-1-luca.weiss@fairphone.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> 
On gen2 chips the stage2 threshold is not 140 degC but 125 degC.

Make the warning message clearer by using this variable and also by
including the temperature that was checked for.

Fixes: aa92b3310c55 ("thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC peripherals")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Link: https://lore.kernel.org/r/20221020145237.942146-1-luca.weiss@fairphone.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message 2022-12-14T14:25:40+00:00 Johan Hovold johan+linaro@kernel.org 2022-11-02T15:26:30+00:00 6f8941646234e2d6e589377aea0dd1ba52365623 Drivers should not be logging errors on probe deferral. Switch to using dev_err_probe() to log failures when parsing the devicetree to avoid errors like: qcom-spmi-adc-tm5 c440000.spmi:pmic@0:adc-tm@3400: get dt data failed: -517 when a channel is not yet available. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20221102152630.696-1-johan+linaro@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> 
Drivers should not be logging errors on probe deferral. Switch to using
dev_err_probe() to log failures when parsing the devicetree to avoid
errors like:

	qcom-spmi-adc-tm5 c440000.spmi:pmic@0:adc-tm@3400: get dt data failed: -517

when a channel is not yet available.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20221102152630.696-1-johan+linaro@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
thermal/drivers/qcom/tsens: Rework debugfs file structure 2022-12-14T14:25:40+00:00 Christian Marangi ansuelsmth@gmail.com 2022-10-22T12:56:57+00:00 89992d95ed1046338c7866ef7bbe6de543a2af91 The current tsens debugfs structure is composed by: - a tsens dir in debugfs with a version file - a directory for each tsens istance with sensors file to dump all the sensors value. This works on the assumption that we have the same version for each istance but this assumption seems fragile and with more than one tsens istance results in the version file not tracking each of them. A better approach is to just create a subdirectory for each tsens istance and put there version and sensors debugfs file. Using this new implementation results in less code since debugfs entry are created only on successful tsens probe. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20221022125657.22530-4-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> 
The current tsens debugfs structure is composed by:
- a tsens dir in debugfs with a version file
- a directory for each tsens istance with sensors file to dump all the
  sensors value.

This works on the assumption that we have the same version for each
istance but this assumption seems fragile and with more than one tsens
istance results in the version file not tracking each of them.

A better approach is to just create a subdirectory for each tsens
istance and put there version and sensors debugfs file.

Using this new implementation results in less code since debugfs entry
are created only on successful tsens probe.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20221022125657.22530-4-ansuelsmth@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
thermal/drivers/qcom/tsens: Fix wrong version id dbg_version_show 2022-12-14T14:25:40+00:00 Christian Marangi ansuelsmth@gmail.com 2022-10-22T12:56:56+00:00 c7e077e921fa94e0c06c8d14af6c0504c8a5f4bd For VER_0 the version was incorrectly reported as 0.1.0. Fix that and correctly report the major version for this old tsens revision. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20221022125657.22530-3-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> 
For VER_0 the version was incorrectly reported as 0.1.0.

Fix that and correctly report the major version for this old tsens
revision.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20221022125657.22530-3-ansuelsmth@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
thermal/drivers/qcom/tsens: Init debugfs only with successful probe 2022-12-14T14:25:40+00:00 Christian Marangi ansuelsmth@gmail.com 2022-10-22T12:56:55+00:00 de48d8766afcd97d147699aaff78a338081c9973 Calibrate and tsens_register can fail or PROBE_DEFER. This will cause a double or a wrong init of the debugfs information. Init debugfs only with successful probe fixing warning about directory already present. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20221022125657.22530-2-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> 
Calibrate and tsens_register can fail or PROBE_DEFER. This will cause a
double or a wrong init of the debugfs information. Init debugfs only
with successful probe fixing warning about directory already present.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20221022125657.22530-2-ansuelsmth@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
thermal/drivers/tsens: Add IPQ8074 support 2022-12-14T14:25:40+00:00 Robert Marko robimarko@gmail.com 2022-08-18T22:02:44+00:00 6840455debd38ea82b1f9fbbf8019944da36f7eb Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP it only has one IRQ, that is used for up/low as well as critical. It also does not support negative trip temperatures. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220818220245.338396-4-robimarko@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 
Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP
it only has one IRQ, that is used for up/low as well as critical.
It also does not support negative trip temperatures.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220818220245.338396-4-robimarko@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
thermal/drivers/tsens: Allow configuring min and max trips 2022-12-14T14:25:40+00:00 Robert Marko robimarko@gmail.com 2022-08-18T22:02:43+00:00 f63baced3839f591db76c227e09d47001373d6db IPQ8074 and IPQ6018 dont support negative trip temperatures and support up to 204 degrees C as the max trip temperature. So, instead of always setting the -40 as min and 120 degrees C as max allow it to be configured as part of the features. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 
IPQ8074 and IPQ6018 dont support negative trip temperatures and support
up to 204 degrees C as the max trip temperature.

So, instead of always setting the -40 as min and 120 degrees C as max
allow it to be configured as part of the features.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
thermal/drivers/tsens: Add support for combined interrupt 2022-12-14T14:25:40+00:00 Robert Marko robimarko@gmail.com 2022-08-18T22:02:42+00:00 4360af35273b742ffc6605ce44f37ac654272443 Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for signaling both up/low and critical trips. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220245.338396-2-robimarko@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 
Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for
signaling both up/low and critical trips.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220245.338396-2-robimarko@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>